30 Day Off-Brand Challenge
-
Good to see the tool in a challenge, RP!
Will follow along

-
Thank you, sir!

-
Day 4


I also shortened a pen. Great saw and file.
Why do they not sell mini Bic pens?

-
Good job shortening that pen without cracking the plastic. That tells us something about the saw — if you tried to do that with a factory-dulled, non-crosscut saw like on most cheap multitools, you might have had a lot more trouble there. It also says something about your patience, because I happen to know if you try to rush that job your pen wont have a great time.
Because of the time zone difference (we must live about 14,000 km apart), I've been staying up late to catch these posts. Worth it.
-
The saw did a nice little job. They changed it from the original Storm, which was already a fine saw.
I appreciate the support.

-
Day 5



-
A little earlier than usual.

It is easier for me to post everything in the afternoon, but I'll try and do it a little earlier.Also, I realized how dangerous the glass breaker is. Have you ever dropped your multi-tool on tiled floor? Well, if you happen to drop this one, and it lands with the glass breaker point-first, you'll ruin your evening and wish you were carrying something else. I did not drop it, just a thought.
-
I also tried to clip my fingernails with this.
It did the job, but I do not know if I'd call it a success.
The scissors on this are massive. The tool is heavy. It is awkward to do a delicate task like that with this. Maneuverability takes a big hit. You simply do not have the control you'd have with a small pair of dedicated, manual scissors, or even small sak scissors.
And as for the cutting, again, you'll vogue like never before trying to get one hand in the perfect position and then the scissors at the correct angle to clip the fingernail. And the bevel angles are not helping either. The scissor blades are thicker than, say, a 91mm sak, and the bevel angle is more obtuse. You will not get that graceful single cut for one fingernail, and leave a perfect curve behind. I eventually had to clip shavings at a time with every cut, to get the fingernail presentable.
And of course, things get even worse when using it with the left hand to clip the fingernails of the right.
In conclusion, if you have been using scissors (or garden shears) for this job, then you will probably have little trouble using this tool. If, like me, you've never used scissors for this, and then try to use the Storm, then you'll have an interesting experience, like a fawn learning to walk. "And that, children, is how your grandpa snipped his thumb off."
-
@ReamerPunch said:
Also, I realized how dangerous the glass breaker is. Have you ever dropped your multi-tool on tiled floor? Well, if you happen to drop this one, and it lands with the glass breaker point-first, you'll ruin your evening and wish you were carrying something else. I did not drop it, just a thought.A guy I know claims to have learned this with a glass coffee table.
Anyway, those scissors are (unsurprisingly) seeing a lot of use. I'm not surprised they're not nail-friendly, but they're sure getting the job done.
-
Oh, and post when it's most convenient. Those of us who live on the opposite side of the world should probably just read it in the morning anyway.
-
It's a little chore to connect the phone to the laptop to move the pictures, so I prefer to do it once, in the afternoon.
And as for the fingernail adventure, at least the new Storm has a great little file. It'll definitely help any manicure endeavors.
-
@ReamerPunch said:
It's a little chore to connect the phone to the laptop to move the pictures, so I prefer to do it once, in the afternoon.I can empathize. It's something of a production for me, too.
@ReamerPunch said:
And as for the fingernail adventure, at least the new Storm has a great little file. It'll definitely help any manicure endeavors.You know, I should just buy a scratching post from PetSmart or something.
-
@ReamerPunch said:
A little earlier than usual.
It is easier for me to post everything in the afternoon, but I'll try and do it a little earlier.Also, I realized how dangerous the glass breaker is. Have you ever dropped your multi-tool on tiled floor? Well, if you happen to drop this one, and it lands with the glass breaker point-first, you'll ruin your evening and wish you were carrying something else. I did not drop it, just a thought.
How do you carry the tool? I would think that glass breaker would wreak havoc with your pocket linings in no time. Would be the first thing I would remove.
-
In the sheath, in my right cargo pocket. I like that it has the glass breaker. It gives it more character. But if I happen to drop it on my floor or toes I'll regret it.
-
@ReamerPunch said:
In the sheath, in my right cargo pocket. I like that it has the glass breaker. It gives it more character. But if I happen to drop it on my floor or toes I'll regret it.Just don't wear glass pants and you should be alright.
-
The tool comes with a small rubber cover for the glass breaker. It could theoretically prevent the rip from destroying pants or glass, but realistically, you will lose the tiny cover immediately. It is tight on there, and I appreciate them providing it, but Ido not have it on the tool now. I would have already lost it.
-
Day 6

Also replaced a zipper on my hoodie. Used the wire-cutters to cut the zipper at the top to fit the new head, then just sewed it so the head could not come off.

And I put some cord to hold the building spring-loaded door open.
We have a slab of concrete for that but it is easier with the cord.
The door had a hook but it's broken off.


-
Zippers and doors? There's definitely a metaphor in there somewhere. Or at least a cheesy Twilight Zone intro.
Nice work!
-
Thanks!

-
Day 7
Ranger bands

I also removed some material from a corner of my bottle cutting jig to allow a razor blade to be installed.
The Phillips was a little short and it being in the middle and the tool being quite thick, I did not have enough clearance to drive the screw, even in a pistol-grip configuration. Thankfully the bit adapter provided enough length to drive the screw in.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login