MTO Unleashed!
-
@McStitchy said:
Day 09Vic. Pioneer (limited edition Olive).
The worn look of the scales reminds me to my time at the Air Force
That is a thing of sheer beauty Sir!

-
@McStitchy said:
BCThat LE has quite the price tag!
-
Naked (like literally naked) Fuzzy Day 9
Just a GEC soddy today...

-
@Fuzzbucket said:
Naked (like literally naked) Fuzzy Day 9Just a GEC soddy today...

Put some trousers on before you injure yourself Fuzzy!

-
A nice mug of coffee at work by the river with my Buck 284 Bantam
A16B106B-17A0-49F8-B569-9549D33C7490 by Duncan Moore, on FlickrThat's the one I've been constantly thinking about getting. It's just right for what I do with EDC. I have the 285 (black) and 283 (black and orange Mossy Oak Advantage paint). There's also a big 5" closed version.
-
Couple rope knives. A Proto EO and a Revere both made by Kutmaster.
'
Those are both great knives. I have the Klein version of the EO COping Knife. I like them without the lock, as the lock is pretty poor. Klein doesn't sell that version anymore.
I swear, I think more of the Revere, as of late, have been sold off as overruns/seconds with the name ground off have been sold so much; I would say they are far more common than your example with the tang stamp. Mine is a second, with two holes drilled for the bail on one scale. D'Oh. Must've been made on a Monday or a Friday!
-
Day 9. A pretty boring, but simple knife. Unlike most of my SAKs, it has no interesting advertising or of any vintage. Had work that required a few tools, but a knife easily carried in shorts. Tinker came in just fine for that.
Victorinox Tinker. A recent secondhand pickup. My plans were to replace the plastic scales with SwissBianco orange G-10, but haven't quite yet; and find it quite adequate. Will probably end up springing for Stayglow. Easier to attach, and MUCH cheaper. And a vehicle just as capable--the Unimog.

-
Day 9
Today is my only Spyderco - a PM2 Left-Handed version. Even though left vs right isn’t that big of deal on this knife as it is with others, I try to support companies who make the offering due to so few doing it.

-
@Sos24 said:
Day 9
Today is my only Spyderco - a PM2 Left-Handed version. Even though left vs right isn’t that big of deal on this knife as it is with others, I try to support companies who make the offering due to so few doing it.

That was my grail Spyderco, until they came out with the PM3; which was more in the range of "right size" for me.
With linerlock designs, left-handed is pretty much key. That's part of the reason I went to Benchmade. All AXIS lock models are left-handed friendly.
-
I'm a big fan of the PM2.....and Benchmades!

-
Day9
Still sorting my office/shop...found some very rough, unfinished blades from the forge in a box and a horseshoe fork& knife set(not mine)
These probably have been sitting there for most of a decade; I should finish them someday.Helps if I remember the pic


-
Day 5: SOG PowerPlay
I bought this tool because I liked the PowerAccess so much, and the PowerPlay was only $30 on eBay, brand new with a bit kit and two sheaths. That was just not something I could pass up. And... it's proven to be a robust, worthwhile tool to have. Yes, the locks get a lot of flak, but I found that leaving all the tools open partway overnight really loosened up the springs and made the locks far more livable. I've been using this tool lately in my garage during my remodel, in place of the Gerber MP600 that I would normally be using. And so far, it's managed every task I've thrown at it. The pliers are pretty robust, I've been using them to leverage out the large hammered-in staples used to hold romex to 2x4s. I've also been using this thing while rewiring my garage, cutting romex, stripping the outer sheath off of romex, using the screwdriver to screw down strain relief, pulling the cutouts out of handi-boxes, etc.
The OHO blades are really useful as well. I use the plain edged blade constantly, and it's really nice. It's easily deployed, locks up well, is nice and long, and quite thick and robust. Both blades are VERY sharp, and I've been using the serrated blade to slice around insulation to strip the wires in lieu of a real wire stripper.
Essentially, the more I use this SOG, the more I like it. It's robust, easily repaired and adjusted, and really comfortable to use. The plastic sheath is really slick, and I'm just happy with this tool. It works, it hasn't broken, and I've abused it pretty well so far.
Charles.




-
@smiller43147 said:
My wife got this for me as a birthday gift. Still have the owners manual.
Wait, what's that stapled to the back?
An old fashioned cash register receipt from 1985!Keeping a PST from 80s is awesome, but keeping that receipt and manual is impressive! :o
@Fuzzbucket said:
Naked (like literally naked) Fuzzy Day 9Just a GEC soddy today...

Nice!

@Sos24 said:
Day 9
Today is my only Spyderco - a PM2 Left-Handed version. Even though left vs right isn’t that big of deal on this knife as it is with others, I try to support companies who make the offering due to so few doing it.

Another iconic knife from Spyderco. You'd raised a really good point--compression lock is pretty ambidextrous, and maybe buying the left handed version make it even easier for both hand to operate?
-
@Noa Isumi said:
Day9
Still sorting my office/shop...found some very rough, unfinished blades from the forge in a box and a horseshoe fork& knife set(not mine)
These probably have been sitting there for most of a decade; I should finish them someday.Helps if I remember the pic

That'd be a cool set to use for BBQ!
@ChopperCharles said:
Day 5: SOG PowerPlayI bought this tool because I liked the PowerAccess so much, and the PowerPlay was only $30 on eBay, brand new with a bit kit and two sheaths. That was just not something I could pass up. And... it's proven to be a robust, worthwhile tool to have. Yes, the locks get a lot of flak, but I found that leaving all the tools open partway overnight really loosened up the springs and made the locks far more livable. I've been using this tool lately in my garage during my remodel, in place of the Gerber MP600 that I would normally be using. And so far, it's managed every task I've thrown at it. The pliers are pretty robust, I've been using them to leverage out the large hammered-in staples used to hold romex to 2x4s. I've also been using this thing while rewiring my garage, cutting romex, stripping the outer sheath off of romex, using the screwdriver to screw down strain relief, pulling the cutouts out of handi-boxes, etc.
The OHO blades are really useful as well. I use the plain edged blade constantly, and it's really nice. It's easily deployed, locks up well, is nice and long, and quite thick and robust. Both blades are VERY sharp, and I've been using the serrated blade to slice around insulation to strip the wires in lieu of a real wire stripper.
Essentially, the more I use this SOG, the more I like it. It's robust, easily repaired and adjusted, and really comfortable to use. The plastic sheath is really slick, and I'm just happy with this tool. It works, it hasn't broken, and I've abused it pretty well so far.
Charles.

-
Day 10


WE knives dragon skin scale is pretty cool is look at and decent to use.
-
@comis said:
Keeping a PST from 80s is awesome, but keeping that receipt and manual is impressive! :oNice!

Another iconic knife from Spyderco. You'd raised a really good point--compression lock is pretty ambidextrous, and maybe buying the left handed version make it even easier for both hand to operate?
The direction you press the compression lock to is the only thing that really varies. It is really a matter of getting used to either way just like with Frame and liner locks.
The other left-handed knife that I have is a true left-hand specific, like the ones Chris Reeves make. The frame lock is on the same side as the clip for left hand tip up pocket carry and the clip os not reversible. Despite preferring flippers, a Chris Reeves’ Left-Handed Sebenza is probably one of my next if not my next knife. I wanted one of the Uni-Haiti Chris Reeves and Shirogorov collaboration, but couldn’t just $2k for a knife, especially considering I like to carry and use my knives.
-
@Sos24 said:
The direction you press the compression lock to is the only thing that really varies. It is really a matter of getting used to either way just like with Frame and liner locks.The other left-handed knife that I have is a true left-hand specific, like the ones Chris Reeves make. The frame lock is on the same side as the clip for left hand tip up pocket carry and the clip os not reversible. Despite preferring flippers, a Chris Reeves’ Left-Handed Sebenza is probably one of my next if not my next knife. I wanted one of the Uni-Haiti Chris Reeves and Shirogorov collaboration, but couldn’t just $2k for a knife, especially considering I like to carry and use my knives.
Sounds like an interesting knife, do you have a picture for that?
I have a few CRK, but all are right handed. I think operating it with left hand totally doable depending on model, but I guess it would be much harder than compression lock. CRK is one of those few companies that will give you a thumbstud for one side only(for most models at least), which can be another issue to deal with.
Btw, just a very friendly reminder, beware of the new 31, some users are reporting lock rock, and for whatever reason, CRK is claiming it part of the design/feature.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login