MTO Unleashed!
-
@CraftsmanSAK said:
This is a knife I have long thought does not get the accolades it deserves. TOPS Dawn Warrior. This knife is just very comfortable doing a variety of tasks.I'm a bit surprised that I don't have a TOPS knife yet. I think their designs are often a bit whacky, and they don't come cheap, but they seem like a stellar company and a big addition to the knife world.

-
@Sos24 said:
Very nice classic, bit as far as 54mm SAKs I prefer the Rambler.The Rambler [picture needed] is just an outstanding SAK.
I suspect that if I had acquired a Rambler first, I wouldn't have ventured into Classic territory. However, I got a Classic early on. At first I dismissed the Classic as a 'toy knife'. But with time and experience I came to really appreciate the small but potent tool set.Often, when out fishing, I find that I don't need anything else and the Classic performs as well as anything. Given awl the options, I'd choose the Ambassador or the Executive over the Classic, however, I have several Classics, and one of them always seems to find a place in my pocket. (In a deployment setting, I had a Classic in my pocket and another in my E&E kit.)
The Executive 81 or Wenger Esquire is really a better choice. However! The Vic Classic can still do most of what "needs done" on a day-to-day basis.
Chuck Yeager made a nice choice with the Executive...bizarre as that knife is. Hey...guess what tomorrow's post will be....

-
Day 10. Felt I needed pretty much the same toolset as yesterday, but that's my only Tinker. Enter one of the half a dozen (and another on the way!) Spartans I own.
Victorinox Spartan Ruby Translucent; ASEA Brown-Boveri. It was picked up because ABB has a transformer plant in a neighboring county that I've toured (and in fact, I was going to buy one of these before we went there to carry for the trip) and part of that work (winding the cores) is outsourced to a manufacturing firm here in town. After seeing all the ugly faded knives, I said I would never buy a translucent scaled SAK. My opinion started to change when I got my Silvertech Huntsman back when we did the Huntsman challenge last year. Not long after, I got an emerald Classic SD in a lot. But, this is my first true translucent 91mm in my arsenal.
I can date this one too--the arrow is pointing to "11" inside the scale--so 2011? And kudos to ABB for putting their logo on the back scale; and not the front. I guess being Swiss; they have respect to the SAK. The thing on the left is a "soil knife" which I use for digging up thistles. I thought it would hold a good edge--but I cannot for the life of me sharpen the thing due to a steel that appears to be harder and tougher than D2. It is boron steel; which I view as only being good for structural applications. But very tough. Also note how little rust it got from being accidentally left outside (I lost it) for three days. Something tells me low in carbon.

-
@pfrsantos said:
**Day 10: **Another not very often (never?) seen around MTo. True Utility SmartKnife. The screw driver tip is not very user friendly, but it can be used to help open the blade, like a flipper. Frame lock, no blade play. Never really used it (what a surprise!), but I think the bottle opener and carabiner would be the most used tools.Notice how everything is labelled, to let everyone know what tool does what...

I bought one here at a local pharmacy. I think I paid around $15? I think it was. Honestly, this is probably the biggest waste of money that I've had. Every knife I buy, or am given as a gift, I try to use at least one week before putting it away. I wasn't impressed. The steel is soft, not heat treated very well, the wrenches strip (and I did them on a very light job), the cutter sucks, and well, nothing works quite right. My original plans were to give it my great-aunt as a cheap beater knife. I gave her a Victorinox Classic SD instead. At least that works and I know it does as I use them daily.
-
@Ron Who said:
Day 10Moki Blakiston´s Fish Owl LE
The standard version of this knife has plain black micarta handles. This LE (200 pieces) adds abalone inlays. It was Moki´s knife of the year 2007. As always with Moki, fit and finish are as perfect as can be. Lightweight (44g) and only slightly larger than a SAK alox Soldier, it is an excellent knife for my Sunday carry.
I´ll have more high end Japanese folders in this challenge, all made in Seki city (like many Spyderco knives).
That's the Moki I'm getting, although I'm not getting the LE. It looks pretty good, at a price within my budget. I've really had a bit of an interest in Japanese folders as of late. It started with some of the old store brands, like Sharp (who actually had Hattori and Sakai made knives). -
Day 10
The Sentinel

-
Day 6: SOG Switchplier
Here is the SOG Switchplier that I bought yesterday, and immediately broke 20 minutes later. Cutting 12ga copper wire. House wiring. The stuff that normal multitools make short work of.... killed this SOG.
In the first pic, you can see that the switchplier is jammed closed. It is spring-loaded, it should not be sticking.
The second pic shows the problem, but it's hard to see. The pin is not long enough, and has popped out of the handle on the left side, stretching the frame apart. The plier head is slightly canted to the right.
The third pic shows the galling damage to the handle. This damage, plus damage to the pin itself, means the pin now pops out even under light pressure. D'oh.
Finally, here's a video that shows the problem in action:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Charles.



-
@Nix said:
The Rambler [picture needed] is just an outstanding SAK.
I suspect that if I had acquired a Rambler first, I wouldn't have ventured into Classic territory. However, I got a Classic early on. At first I dismissed the Classic as a 'toy knife'. But with time and experience I came to really appreciate the small but potent tool set.Often, when out fishing, I find that I don't need anything else and the Classic performs as well as anything. Given awl the options, I'd choose the Ambassador or the Executive over the Classic, however, I have several Classics, and one of them always seems to find a place in my pocket. (In a deployment setting, I had a Classic in my pocket and another in my E&E kit.)
The Executive 81 or Wenger Esquire is really a better choice. However! The Vic Classic can still do most of what "needs done" on a day-to-day basis.
Chuck Yeager made a nice choice with the Executive...bizarre as that knife is. Hey...guess what tomorrow's post will be....

Back in NROTC, I started carrying a classic for dress uniform pre-inspections. I lost it at some point and replaced with a LM Micra. The Micra was bumped when I discovered the Rambler and has been riding keychain duty every since.
You can have a picture of my Navy scale Rambler and modded (bladeless) Rambler, but to see the current one you will jave to wait until at least tomorrow.
-
Day 10
Traditional!

-
@CraftsmanSAK said:
That photo looks better than anything I've seen on their website!
Thanks!
So nice of you :D -
@Mechanickal said:
Day 10Traditional!

Nice pic and knife
-
Day 11


Inspired by Sos24, here are two of mine from Ferrum Forge. Smaller one above is the Ferrum Forge x Massdrop(Made by WE) Falcon Winged edition, while the bigger one is the Ferrum Forge Pro Series Fortis 2.0 Flipper, I really like what they did to reduce the weight of the handle, making it a perfectly balance folder.
-


Inspired by Sos24, here are two of mine from Ferrum Forge. Smaller one above is the Ferrum Forge x Massdrop(Made by WE) Falcon Winged edition, while the bigger one is the Ferrum Forge Pro Series Fortis 2.0 Flipper, I really like what they did to reduce the weight of the handle, making it a perfectly balance folder.
Nice pair
-
@cody6268 said:
Day 10. Felt I needed pretty much the same toolset as yesterday, but that's my only Tinker. Enter one of the half a dozen (and another on the way!) Spartans I own.Victorinox Spartan Ruby Translucent; ASEA Brown-Boveri. It was picked up because ABB has a transformer plant in a neighboring county that I've toured (and in fact, I was going to buy one of these before we went there to carry for the trip) and part of that work (winding the cores) is outsourced to a manufacturing firm here in town. After seeing all the ugly faded knives, I said I would never buy a translucent scaled SAK. My opinion started to change when I got my Silvertech Huntsman back when we did the Huntsman challenge last year. Not long after, I got an emerald Classic SD in a lot. But, this is my first true translucent 91mm in my arsenal.
I can date this one too--the arrow is pointing to "11" inside the scale--so 2011? And kudos to ABB for putting their logo on the back scale; and not the front. I guess being Swiss; they have respect to the SAK. The thing on the left is a "soil knife" which I use for digging up thistles. I thought it would hold a good edge--but I cannot for the life of me sharpen the thing due to a steel that appears to be harder and tougher than D2. It is boron steel; which I view as only being good for structural applications. But very tough. Also note how little rust it got from being accidentally left outside (I lost it) for three days. Something tells me low in carbon.

I think that's one of the selling point of SAK, is its stainless-ness. Not every knife I'd trust to be fine in my pants pocket during the hot humid summers, but SAK I can always trust to be fine.
@ChopperCharles said:
Day 6: SOG SwitchplierHere is the SOG Switchplier that I bought yesterday, and immediately broke 20 minutes later. Cutting 12ga copper wire. House wiring. The stuff that normal multitools make short work of.... killed this SOG.
In the first pic, you can see that the switchplier is jammed closed. It is spring-loaded, it should not be sticking.
The second pic shows the problem, but it's hard to see. The pin is not long enough, and has popped out of the handle on the left side, stretching the frame apart. The plier head is slightly canted to the right.
The third pic shows the galling damage to the handle. This damage, plus damage to the pin itself, means the pin now pops out even under light pressure. D'oh.
Finally, here's a video that shows the problem in action:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Charles.
Sorry to hear about this, I hope it could be returned or at least warranty would cover this. Make no sense a multitool fail under light use.
-
@Sos24 said:
Back in NROTC, I started carrying a classic for dress uniform pre-inspections. I lost it at some point and replaced with a LM Micra. The Micra was bumped when I discovered the Rambler and has been riding keychain duty every since.You can have a picture of my Navy scale Rambler and modded (bladeless) Rambler, but to see the current one you will jave to wait until at least tomorrow.

@Mechanickal said:
Day 10Traditional!

Pretty cool shot, look at that shallow depth of field. Was it even taken by a cell phone or an actual camera?
:D
-
@comis said:
Pretty cool shot, look at that shallow depth of field. Was it even taken by a cell phone or an actual camera?Cell phone!
All my pics so far were phone pics.
It's a Motorola One Action with triple back lens. It can mimic the depth of an actual camera.
At only €180, it's a super budget phone!! -
DAY 11
2 Smith & Wesson ExtremeOps knives




-
Day 11
Going traditional to my roots as a farmer's son with this Remington stockman. I believe it was made by bear and sons from what I've read online . A great pattern, and a pretty looking knife


-
That's a nice knife Storm

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login