MTO Unleashed!
-
Day 9: Commercial Electric 7-in-1 Electrician's Multi-Tool with Pouch
Since there was that lovely Buck X-Tract a page back, and I brought up the Outu and CRKT, I thought I'd use another in this line of strange knife-based plier tools. This one is Home Depot's "Commercial Electric" line. It's very, very similar to the Outu plierknife, and seems to be made by the same manufacturer and of the same design. If anything, this seems like a first-generation tool, with the Outu plierknife being the second generation. I say this, because the tools on this aren't quite as nice or well-designed as the Outu. The deploy switch for instance, flips in the opposite direciton. This makes it impossible to close the tool one-handed. The Outu switch can be depressed with the forefinger while the thumb retracts it. That's neigh on impossible with this tool. The Outu has a better made phillips driver, and the one handed opening flat driver opens more rapidly and with less of an arc. This flat driver my thumb wants to come off of the stud as I'm opening it, and it makes a much longer arc.
But enough with the comparisons to the Outu (which I'll probably carry later next week). This tool is actually really useful. It has a completely useable wire stripper tool that deploys like a switchblade. It has an electricians sheepfoot blade, which deploys via nail nick. It's rather short, but this actually seems like a good size for control and getting into tight places, so I give it a pass. It's also pretty sharp out of the box, which is a nice touch. I say the Outu has a better phillips driver, but this one is still very good. It's better than 99% of the screwdrivers in cheap multitools. The bottle opener is one-hand opening, which is quite nice while drinking on the job. Or for screwing things. Either way. All of the tools lock open with a liner lock except the pliers, which lock open via the switch. For $11, this actually comes in supremely handy. I have it in the drawer with my soldering iron, heat shrink, multimeter, crimpers, etc. This is great for working on house wiring, because I don't need to carry five tools - flat driver, phillips driver, wire stripper, needle nose w/cutters, and knife. I carry one tool, and it does everything I need to attach a switch or an outlet.
I've been putting it to use in the garage for a few days now, as I add a 20amp 120v circuit and finish my 30amp 240 volt run with outlets.
Charles.




-
A somewhat eventful day here. We were hit by strong, sustained winds starting around noon. One of the bamboo canes that supports the anti-bird netting over my vegetable patch got snapped. I used this Breeden to make a few cuts into a fresh cane and snap it to length.

So, I'm standing there, feeling pleased to have had the Breeden on my belt and put to good use. A great knife made for hard use.
The wind is gusting up over 40mph. (Reports of over 60mph up at higher altitudes.)
I'm standing there thinking, "with these winds it would be a terrible time for a wildfire." Sure enough...in the next 15 minutes...the sky begins to fill with smoke...... Maybe I smelled the smoke at some subconscious level?

Anyway, with strong winds coming out of the South, and a wildfire now raging...directly to my South...there is a chance that I may have to evacuate. The house is filled with the smell of smoke and visibility outside is really low. The fire went from about 10 acres to 400 acres in a matter of 2.5 hours.
If I do have to evacuate, I probably won't be able to continue the challenge. If my house burns down, I definitely won't be able to continue!
I'll let you guys know how it goes.

The winds have calmed down a bit and shifted direction a few points (if I can read the lean of the trees correctly.). I'm feeling slightly more optimistic; however, I suspect we'll be sleeping very lightly this evening.
Please do stay safe and vigilant, and I hope the wind would slow down and the evacuation is not needed. I don't know how good is the warning system in place, but it is always err on the safe side. Wildfire with strong wind is no joke, sometimes travel faster than a car can drive.
-
Hope things work out ok Nix , it’s got to be really worrying :'(
-
@ChopperCharles said:
Day 9: Commercial Electric 7-in-1 Electrician's Multi-Tool with PouchSince there was that lovely Buck X-Tract a page back, and I brought up the Outu and CRKT, I thought I'd use another in this line of strange knife-based plier tools. This one is Home Depot's "Commercial Electric" line. It's very, very similar to the Outu plierknife, and seems to be made by the same manufacturer and of the same design. If anything, this seems like a first-generation tool, with the Outu plierknife being the second generation. I say this, because the tools on this aren't quite as nice or well-designed as the Outu. The deploy switch for instance, flips in the opposite direciton. This makes it impossible to close the tool one-handed. The Outu switch can be depressed with the forefinger while the thumb retracts it. That's neigh on impossible with this tool. The Outu has a better made phillips driver, and the one handed opening flat driver opens more rapidly and with less of an arc. This flat driver my thumb wants to come off of the stud as I'm opening it, and it makes a much longer arc.
But enough with the comparisons to the Outu (which I'll probably carry later next week). This tool is actually really useful. It has a completely useable wire stripper tool that deploys like a switchblade. It has an electricians sheepfoot blade, which deploys via nail nick. It's rather short, but this actually seems like a good size for control and getting into tight places, so I give it a pass. It's also pretty sharp out of the box, which is a nice touch. I say the Outu has a better phillips driver, but this one is still very good. It's better than 99% of the screwdrivers in cheap multitools. The bottle opener is one-hand opening, which is quite nice while drinking on the job. Or for screwing things. Either way. All of the tools lock open with a liner lock except the pliers, which lock open via the switch. For $11, this actually comes in supremely handy. I have it in the drawer with my soldering iron, heat shrink, multimeter, crimpers, etc. This is great for working on house wiring, because I don't need to carry five tools - flat driver, phillips driver, wire stripper, needle nose w/cutters, and knife. I carry one tool, and it does everything I need to attach a switch or an outlet.
I've been putting it to use in the garage for a few days now, as I add a 20amp 120v circuit and finish my 30amp 240 volt run with outlets.
Charles.
Thanks for showing and the description of another interesting knife based tool
-
@pfrsantos said:
**Day 13: **Another portuguese creation, Carpa (Carp). A very affordable and reliable knife for agricultural use. It's an OHO, lock back, amd slim as a sheet of paper.Thanks for this, I definitely am learning more from your posts about portuguese knives and less commonly known brands.
Couple stainless covered knives. I dont know who made the Stockman. The What-A-Knife was made by Camillus.
Nice pair, David! First time seeing a stainless cover Camillus.

You ever have a knife that as soon as you picked it up, it felt like it was made for you. The feel, balance, action, etc just all felt right. For me that was the Shirogorov Neon Lite.
There is only one thing that I wish was different and that is that the clip was reversible, but that is unfortunately the case with many knives. Most of the time it is fine because despite being left-handed, I carry the knife in my right pocket. The rest of the time I wear it clipped to my pants between belt and waistband until I find a slip with clip I like or come up with something different.
I can never quite get over those few lines, almost like a Japanese painting.

-
-
A family friend who was supposed to arrive today to look at an electrical problem messing up the wiring going to the oven (which means my grandmother's going nuts--she hasn't been able to cook for a week as a result!); but he wasn't able; but I grabbed my Klein Tools (Kutmaster) 1550-2 Electrician's Knife in carbon steel this morning just in case. This is a new pickup--and the only current production American-made electrician knife I own. I've really been putting it to use for farm work.
When he is able to look at the wiring problem, I have a ton of extra TL-29/electrician type knives to choose from in order to not repeat anything. They're in trucks, toolboxes, desks, you name it. It's an easily pocketable, but sturdy pattern that gets the job done. A Colonial from the '70s was among the first knives I ever owned; and was in use until I started buying electricain's knives like crazy (eBay prices are super cheap for non TL-29 USA-made electrician knives). I'll just try to avoid carrying any Klein hawkbill--like most former miners, he has and carries one. That way, someone picking up the wrong knife is avoided. That's the problem about having my Granddad being a retired miner; a lot of his old work knives I have gotten from him over the years; and many of my friends who were miners (often employed by the same company; Pittston) have the same knives on them as I do.
This one turned out badly....

Unlike the 1920s when electrician's knives were first made, to WWII when the electrician's knife became well known as the TL-29; not too many things use a big slotted screw. Thus, that's why you see a lot of them modded to modify, or remove that blade entirely. I use it heavily, mostly to pry with. But, I did have to use it to unscrew the fuel tank cap on the old Stihl 011AV chainsaw. It didn't start (I suspect my own stupidity with the "Quick Stop" shield), so I had to drag out the one I hate--a modern production MS250. For once ,it started easily today--two pulls! Usually I'm there for five minutes swearing and cussing its carburetor (a known issue is that it tends to flood easily) like someone in the merchant marine. I'm trying to save up for the MS-170 myself; but we have old Homelites and a McCulloch exactly the same size as the MS-170 needing a little TLC that would probably work just as well.

011AV. I think this was one of the first saws to have the "Quick Stop" feature. Made in the mid '80s, I think?

MS250. Bought new about 10 years ago from the local Stihl dealer.

I love Klien tools and few things I got from them always scream quality. Looks like a solid day of work!
@ChopperCharles said:
Day 9: Commercial Electric 7-in-1 Electrician's Multi-Tool with PouchSince there was that lovely Buck X-Tract a page back, and I brought up the Outu and CRKT, I thought I'd use another in this line of strange knife-based plier tools. This one is Home Depot's "Commercial Electric" line. It's very, very similar to the Outu plierknife, and seems to be made by the same manufacturer and of the same design. If anything, this seems like a first-generation tool, with the Outu plierknife being the second generation. I say this, because the tools on this aren't quite as nice or well-designed as the Outu. The deploy switch for instance, flips in the opposite direciton. This makes it impossible to close the tool one-handed. The Outu switch can be depressed with the forefinger while the thumb retracts it. That's neigh on impossible with this tool. The Outu has a better made phillips driver, and the one handed opening flat driver opens more rapidly and with less of an arc. This flat driver my thumb wants to come off of the stud as I'm opening it, and it makes a much longer arc.
But enough with the comparisons to the Outu (which I'll probably carry later next week). This tool is actually really useful. It has a completely useable wire stripper tool that deploys like a switchblade. It has an electricians sheepfoot blade, which deploys via nail nick. It's rather short, but this actually seems like a good size for control and getting into tight places, so I give it a pass. It's also pretty sharp out of the box, which is a nice touch. I say the Outu has a better phillips driver, but this one is still very good. It's better than 99% of the screwdrivers in cheap multitools. The bottle opener is one-hand opening, which is quite nice while drinking on the job. Or for screwing things. Either way. All of the tools lock open with a liner lock except the pliers, which lock open via the switch. For $11, this actually comes in supremely handy. I have it in the drawer with my soldering iron, heat shrink, multimeter, crimpers, etc. This is great for working on house wiring, because I don't need to carry five tools - flat driver, phillips driver, wire stripper, needle nose w/cutters, and knife. I carry one tool, and it does everything I need to attach a switch or an outlet.
I've been putting it to use in the garage for a few days now, as I add a 20amp 120v circuit and finish my 30amp 240 volt run with outlets.
Charles.
For 11$ to get a specialized tool is a great bargain, the wire stripper looks good and great find!
-
Day 14 (ice cream Sunday)



Ruike is owned by Fenix flashlight, and like its flashlight counterpart, I think it aims to bring value to customers. I pick this knife up when I was travelling to Miami last year, and think it's a solid tool fairly priced at $50. The whole body is stainless steel, but internally milled out to lighten the knife and balance perfectly at index finger. The lines are thoughtfully designed, and with an innovative frame lock with additional lock to secure it. Detent is decent so the knife stored in chassis securely, but will flip open authoritatively. The drop shut is smooth and blade center perfectly.
What knives in your stash would you consider a value buy?
-
Half way through, I am nominating the following from the current MTO unleashed challenge, Good luck!













-
That is a nice looking knife. When it comes to Ruike, I more commonly think of their multifunctional knives. I recently learned of their connection to Fenix Flashlights, which I do like.
-
DAY 14
Buck Stockman 301 and a bit of reading material
4134EBF8-0415-49EA-B843-D8AB8A150871 by Duncan Moore, on Flickr -
A somewhat eventful day here. We were hit by strong, sustained winds starting around noon. One of the bamboo canes that supports the anti-bird netting over my vegetable patch got snapped. I used this Breeden to make a few cuts into a fresh cane and snap it to length.

So, I'm standing there, feeling pleased to have had the Breeden on my belt and put to good use. A great knife made for hard use.
The wind is gusting up over 40mph. (Reports of over 60mph up at higher altitudes.)
I'm standing there thinking, "with these winds it would be a terrible time for a wildfire." Sure enough...in the next 15 minutes...the sky begins to fill with smoke...... Maybe I smelled the smoke at some subconscious level?

Anyway, with strong winds coming out of the South, and a wildfire now raging...directly to my South...there is a chance that I may have to evacuate. The house is filled with the smell of smoke and visibility outside is really low. The fire went from about 10 acres to 400 acres in a matter of 2.5 hours.
If I do have to evacuate, I probably won't be able to continue the challenge. If my house burns down, I definitely won't be able to continue!
I'll let you guys know how it goes.

Those are bad news :-(
I'm wishing you and your beloved, and all fellow citizens, all the best to stay unaffected by this.
I'm sure you're well prepared for such a situation. Stay safe buddy
Btw... solid little fixie that

-
DAY 14
I bought this one in 1990 in Jokkmokk (Sweden) when I was there in hollyday



-
Stay safe Nix
Day 14
Today's knife is one of my oldest and longest owner, bought it 24 odd years ago from local farm supplies store. No idea of brand , carried for 4 or so years, then on my webbing in the army . One handed opening before I knew that was a thing,
sculpted finger grips are comfortable and keep the knife secure even when wet. Aluminum body with stainless blade, taken a flogging and keeps on keeping on, a well spent $20
-
Day 14.
A Case XX Quartermaster from WW2 with a sheath I made for it.

-
Day 14
Today's knife is one of my oldest and longest owner, bought it 24 odd years ago from local farm supplies store. No idea of brand , carried for 4 or so years, then on my webbing in the army . One handed opening before I knew that was a thing,
sculpted finger grips are comfortable and keep the knife secure even when wet. Aluminum body with stainless blade, taken a flogging and keeps on keeping on, a well spent $20I love seeing those "proven-by-use" examples

-
-
@comis said:
Day 14 (ice cream Sunday)


Ruike is owned by Fenix flashlight, and like its flashlight counterpart, I think it aims to bring value to customers. I pick this knife up when I was travelling to Miami last year, and think it's a solid tool fairly priced at $50. The whole body is stainless steel, but internally milled out to lighten the knife and balance perfectly at index finger. The lines are thoughtfully designed, and with an innovative frame lock with additional lock to secure it. Detent is decent so the knife stored in chassis securely, but will flip open authoritatively. The drop shut is smooth and blade center perfectly.
What knives in your stash would you consider a value buy?
Nice one Comis

You've got a good deal there. The 135 is over 70€ here. -
Day 14
Lionsteel Opera Damascus
One of my too many shelf queens

This is a stainless damascus made by Damasteel. The pattern is called Heimskringla. IIRC this is the same damascus that Victorinox use.


-
-
Buck Stockman 301 and a bit of reading material
4134EBF8-0415-49EA-B843-D8AB8A150871 by Duncan Moore, on FlickrInteresting read
I bought this one in 1990 in Jokkmokk (Sweden) when I was there in hollyday

I like the piggyback arrangement, definitely different. I always meant to ask is the little piece of leather at the bottom help to draw the knife out?(instead holding the sheath which could be slashed thru?)
Day 14
Today's knife is one of my oldest and longest owner, bought it 24 odd years ago from local farm supplies store. No idea of brand , carried for 4 or so years, then on my webbing in the army . One handed opening before I knew that was a thing,
sculpted finger grips are comfortable and keep the knife secure even when wet. Aluminum body with stainless blade, taken a flogging and keeps on keeping on, a well spent $20Cool knife with a history!
@sak60 said:
Day 14.
A Case XX Quartermaster from WW2 with a sheath I made for it.I don't know whether it is accurate, but I have a feelling many American fixed blade during those era are all heavily influenced by Marble's Ideal, and many knives would adopt a fuller one way or another as a feature. Though I wonder how practical given some of them are vastly different from the original fuller design.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
