Gerber MP 600 D.E.T Fake.
-
@ChopperCharles said:
So has anyone thought of grabbing one of the fakes, taking out that weird spear tool, turning it down in a lathe and pressing on a bit driver?Charles.
well I thinned and ground mine down to a sharper point, stripped the paint and use it to crack and stab ice from my freezer, and to poke holes in cans and containers
but the lock has failed twice on me, fortunately with no ill results 
-
So I grabbed one of these for $11. And... it's pretty crap. Wire cutters don't cut anything, pivot feels like there's sand in it, tried out the bottle opener driver and it bent right away. It's very much crap compared to the MP600.
However, the larger flat driver is decent enough. In one of my MP600's the flat driver had snapped off. I put a saw in that tool, which left a large space, but not enough space for a replacement flat driver. Finding a replacement flat driver is impossible, especially in black, and the driver in this fake is thinner than the MP600 driver anyhow. So, in it went. I had to exclude a washer or two because it's all a tight fit, but I got an extra tool out of the deal and I'm quite happy.
The added benefit is the pivots are 4mm. I had to drill out the flat driver to fit the 5mm Gerber pivots, but I've been needing a reliable source for 4mm tool pivots for my modding. So... WOO!
AND, the clips that hold the sliding pliers on fit the Gerber perfectly.
Plus I'm going to use these handles as a test bed for drilling and tapping holes to use a different style of pocket clip.
So I'm happy for all the parts. The took is utter crap as a whole, but for $11 that was a good purchase for the flat driver, replacement clips, and the pivots.
Charles.
-
Same price as the Ozark Trail multi tool selling at WalMart
Not a bad replica of the D.E.T for less than 10 bucks. Good for parts. -
Someone just blew almost $40 on one.
-
I hope they realize it is a fake and get their money back.

Wonder how many people think MP600s are junk, because of the fake DETs?

-
Maybe a collector? ::)..There are many "fake stuff" collectors out there. I know a guy who has all denomination fake US currency, Morgan Dollar coins, Breitling watches and even a Leatherman Wave and Charge and everything looks exactly like the authentic items.
-
Interesting collection focus. I like a good rip-off tool, but don't actively collect them. :ahhh
But, that said, those DET fakes can still be had all over the place for $10-$20 shipped, so that buyer got a bad deal.

-
Thanks for the posting this Gerleatherberman it's important to know what you're buying. I have see similar MP600 fakes on Ebay in the past. Buyer beware.
-
Does anyone know if the tool screws work from these fakes in the real Gerber tools. I snapped one off my Center Drive and need to replace it. I know the one from the MP600 is the same but I don't want to tear apart a good MP600 just to tale the screws I need.

-
I have no clue. I have never had to do it. Mind you, considering the obvious lack of quality that permeates the knock off throughout, I probably wouldn't suggest doing that if you are looking for something durable...if it fits in the first place.
-
I suppose I should answer just in case someone ever has the same question I did. I purchased one and found that nothing is interchangeable except the plier head. Since no one would ever want to make that switch I would just say nothing will work on a real Gerber.
-
@NewZona Rides said:
Does anyone know if the tool screws work from these fakes in the real Gerber tools. I snapped one off my Center Drive and need to replace it. I know the one from the MP600 is the same but I don't want to tear apart a good MP600 just to tale the screws I need.DAmn it is sad though, you snap a screw and consider buying an entire fake tool because it is cheaper/easier than trying to get a replacement screw for the original. I wish Gerber would take this into account. Making a warranty claim to them is the slowest process.
-
@Spoonrobot said:
Interesting. Think it's worthwhile to alert Gerber to this?A few years ago the firearms accessory the Grip Pod became an item that was issued to certain US Military members, over the course of time poorly made Chinese clones managed to get into the supply system and cause problems for frontline troops. Being that the EOD tool is sometimes issued and used by US Military personnel it may be worth an email to let Gerber know so they can make sure their supply line doesn't get compromised.
The only way it gets into front line troops is when the troops steal the genuine items, sell them and then replace them with cheaper items so they don't get fined by the army for losing items. I think everyone involved is to blame a little. When I was in my ET tool (the thing we use to bury our poop with) got stolen by another soldier. It is impossible to prove but the army would have fined me about 100 bucks for that, so I went down and bought a cheap 20 dollar replacement. It never bothered me because I never went to the front line but it is hardly the copycat manufacturers fault that the tools end up there. It takes 4 parties to contribute, the manufacturer for making them, army for charing their troops to replace them, the soliders for stealing them and the victim soldiers for replacing them with counterfiets.
-
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562 -
@DavisNikolov said:
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562As far as I can tell, all those MP600's look the real deal

-
@AlephZero said:
As far as I can tell, all those MP600's look the real deal
Thank you, I red some about the differences myself and they seem to check out. Auctions end tonight, we'll see what ends up in my basket :D
Edit : it ends tomorrow night -
I noticed that Mack Trucks is now selling a fake DET with their name on it; called the "Dark Night" Multitool. Really does not make sense, given they have SAKs and LMs--the real deal.
https://www.mack-shop.com/eshop/p/3080/mack-dark-knight-multitool
-
@DavisNikolov said:
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562That seller usually sells legitimate tools : I bought quite a lot of items from him in the last months (mostly MP600/400s and knives)
His Leathermans end up always too high for me though.
Only take care that some tools that "look" good at first on the pictures might not be properly working in the end (slightly bend tools or such cannot always be seen easily on pics) -
Thank you for the input. I didn't manage to get anything this time. Which reminded me why I only search for listings that have "buy now" price.
-
@DavisNikolov said:
Thank you for the input. I didn't manage to get anything this time. Which reminded me why I only search for listings that have "buy now" price.Just try to "snipe" ;) wait for the very last time to put the bid and you may be lucking sometimes :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login