MTO Unleashed!
-
@Fuzzbucket said:
Fuzzbusters! Doo Doo Do-do Dooo... Day 15A rather old one today - Palstave Axe from Essex Middle Bronze Age, inherited from my brother...

What a fantastic piece of history

Day 15 KJ Eriksson and Herbertz

-
@Fuzzbucket said:
Sort of, in a half-arsed sort of way. :DI think you mean half-axed. Get it? AN AXE PUN!

-
**Day 15: **This is the Buck I was intending to post the other day, but I couldn't find it. Turns out it was in one of the OTHER places I store my MT/SAKs.
Can you have too many tools and places to keep them? Nah, that's stupid!
Buck 309 Companion. This was my EDC back in the 80's long before I even heard the term "EDC".
Actually I think I lost that knife, and bought this as a replacement..jpeg)
-
@Rizio Il Ghiro said:
There’s some seriously cool steel on this thread, not to mention bronze and flint!Day 15
We’re halfway there so time to celebrate with a old one and my only other Damascus blade, a Vic 2016 Pioneer X which has joined me for a dull day at the keyboard- over for another day thankfully!

Looks like you've found your favourite

Beautiful Px Rizzi

-
-
-
-
@powernoodle said:
I think you mean half-axed. Get it? AN AXE PUN!
Ooooowww... Taxey!!!
-
-
Day 15:
We had a wind storm a couple days ago (which drove the nearby wildfire). A few of the trees had limbs that were damaged by the high winds. I used pruners to lop off the affected limbs. I decided to save some of the limbs to use as supports in the garden. So, I pulled out my Buck Hoodlum and used it like a machete to remove extraneous leaves, twigs, and small branches. The Hoodlum was brilliant for this task. Keen edge, nice chopping profile, and a comfortable handle. A nice little knife...if a 10" knife can be called 'little'.

-
@Fuzzbucket said:
Fuzzbusters! Doo Doo Do-do Dooo... Day 15A rather old one today - Palstave Axe from Essex Middle Bronze Age, inherited from my brother...
Nice patina!
-
@powernoodle said:
I think you mean half-axed. Get it? AN AXE PUN!
I'm not sure that was axually the best pun I've ever heard, but not bad.

-
We had a wind storm a couple days ago (which drove the nearby wildfire). A few of the trees had limbs that were damaged by the high winds. I used pruners to lop off the affected limbs. I decided to save some of the limbs to use as supports in the garden. So, I pulled out my Buck Hoodlum and used it like a machete to remove extraneous leaves, twigs, and small branches. The Hoodlum was brilliant for this task. Keen edge, nice chopping profile, and a comfortable handle. A nice little knife...if a 10" knife can be called 'little'.

I like that, nice chopper
There's a joke in all that somewhere about your 10" chopper, but I'm not going to go there... I'm too big for that... -
We had a wind storm a couple days ago (which drove the nearby wildfire). A few of the trees had limbs that were damaged by the high winds. I used pruners to lop off the affected limbs. I decided to save some of the limbs to use as supports in the garden. So, I pulled out my Buck Hoodlum and used it like a machete to remove extraneous leaves, twigs, and small branches. The Hoodlum was brilliant for this task. Keen edge, nice chopping profile, and a comfortable handle. A nice little knife...if a 10" knife can be called 'little'.


-
@Ron Who said:
Another foldable bread knife: the Opinel #12 serratedI have the carbon steel PE variant. It is very good in the kitchen. Even though it is a bit expensive, I have been meaning to get the picnic set the serrated Inox #12 is exclusive to. And I'm betting the #6-based vegetable peeler will be used in the kitchen a lot, given how I EDC a carbon #6. I'm liking the Outdoor version better, however. A plastic handle is easier to sanitize.
-
We had a wind storm a couple days ago (which drove the nearby wildfire). A few of the trees had limbs that were damaged by the high winds. I used pruners to lop off the affected limbs. I decided to save some of the limbs to use as supports in the garden. So, I pulled out my Buck Hoodlum and used it like a machete to remove extraneous leaves, twigs, and small branches. The Hoodlum was brilliant for this task. Keen edge, nice chopping profile, and a comfortable handle. A nice little knife...if a 10" knife can be called 'little'.

Nice job and beautiful Hoodledeedoo Nix

Great to see no smoke in that picture
-
@McStitchy said:
Great to see no smoke in that picture
The fire is only 15% contained, they report. However, it has subsided significantly and is mostly a smoldering mess from what I understand. More rain expected tonight!

-
@ChopperCharles said:
Day 11: PowerDelux 8-in-1 MultitoolSpoiler:
This is a really slick little gem of a knife. It's 75mm long, so shorter than a Wenger SAK. It has a very sharp tanto style blade but the forward edge is blunted. Very good scissors, a 2.5D phillips with nail file, a dual opener with a flat driver on the end, and a pretty good saw. All this in a very pocketable package. I carry this in the coin pocket of my jeans, and it fits even better than a Wenger. All the tools are locking as well.
I grabbed this little gem off of Amazon here: https://www.amazon.com/gp/product/B07Z4DBFXN
There is also a "Bibury" branded version which swaps the saw for a line cutter, which you can get here: https://www.amazon.com/gp/product/B082HNVJTB/
The line cutter is dull and can't cut anything without a good deal of sharpening, but the saw is actually pretty good. So you decide there.Basically, the tools in this knife are based on Gerber Suspension tools. They're not identical - the pivot in these two tools is very slightly larger than the Suspension. However, the lock bar is the same and the profile of the tool is the same. So if you ream out the pivot in a suspension tool, it will swap right in. The tools that are actually included are pretty good. The only lamentation I have is the lack of a large flat driver. That's the only thing that seems to be missing.
As mentioned, the blade is very sharp, and though it's lacking an edge on the front part, it's quite useful as-is. (And if you have some patience, you can add an edge to the front for a true tanto blade)
The scissors in my PowerDelux came sharp enough to cut paracord. And cut it over and over and over again, and then even cut the individual inner strands cleanly. These are GOOD scissors. Better than the scissors in any Gerber I own. Suspension NXT, Suspension, multiple MP600s, and an MP400. These scissors are just better. The Bibury scissors were almost as good. I'm thinking that was sample variation. They could cut paracord if you're selective about where in the scissors you snip. So you may get good scissors or great scissors. In either case, both of these tools have better scissors than those in any of my Gerber tools.
On the other hand, the can opener sucks. It's a copy of Suspension NXT's dual tool, but with some changes. They added an unsharpened wire stripper notch (akin to the notch on a SAK), but also made the profile for the can opener smaller and did not put an edge on it. While bottles are opened easily with the bottle opener part, it is a struggle to open a can, and my thumb hurts after trying. The pic shows the difference, the PowerDelux required a lot of tiny holes, and lots of force to puncture, and it took forever. In comparison, the NXT made a smoother opening with fewer plunges, with far less effort, and in 1/4 the time.
The phillips driver fits more screws than any of the Gerber drivers I have. Suspension or MP600 or NXT, this PowerDelux slots into a variety of screws better. The file is short, but it works well on steel and aluminum. And fingernails of course. The saw is another stand-out tool. Yes it's short, but it went through small green branches quicker than the SOG PowerPlay saw. (though just barely)
So overall, I find this tool supremely useful. If they'd fix the can opener and add a flat driver, it'd be just about perfect. As it stands, I use it all the time in place of a SAK. The locking gerber style tools are just a pleasure to operate. I like my Suspension NXT because of the tools. I don't like the pliers or the frame or anything else really. This trims all of that down so I have some of the essential-to-me tools from a Suspension, in a smaller package. And I can carry a multitool that's more suitable, or even one with a reduced toolset like the Gerber Octane or SOG Sync belt buckle, and still have a good selection of usable tools on me.
For under $12 bucks, it really is a great deal.
Charles
What a nice little tool!

-
DAY 15
Busy day... quick pic of my TOPS Hazen Legion.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


