MTO Unleashed!
-
Excellent contributions you all...

-
Day 18
This is my Yeoman mod made from a compact and an old explorer... the rest became a Climber and was given away :)
It's getting used frequently... not only for office type situations...



-
@Ron Who said:
Some of my fixed blades1st pic Kershaw Boot Knife and Böker Steel Ranger
2nd pic Böker Arbolito and BrowningLove the look of that Browning

@McStitchy said:
Day 18This is my Yeoman mod made from a compact and an old explorer... the rest became a Climber and was given away :)
It's getting used frequently... not only for office type situations...
Hopefully soon you will have the weather to use that bench

-
This is a bit out of the ordinary for me:

This is a Pathfinder, the smaller version of two similar designs, by Treeman Knives. It is got a 4.25" blade made from 1/4" O-1 tool steel. It is incredibly well made, with superb fit and finish. While it starts out being 1/4" at the spine, the deep hollow grind over a broad blade gives it a keen edge and cutting profile. It came with a high-ride sheath that makes it surprisingly easy to wear, although it is a bit heavy.
I've used this knife a fair bit, but I have to say I think it's a knife I admire more than I love. For me, it is not quite as instinctive to use as some other more traditional knives.
I like that, i think a nice wooden handle would really make it though

-
DAY 18
This is my only Chinese made Buck , the little Solo. Not a bad little knife and I often carry it and use it for small work.
5CF74BD9-8E3C-4019-BDAD-A13502F265E1 by Duncan Moore, on Flickr -
**Day 18: **My little collection of the Pioneer X.
Left to right, a user MTO 2016 knife of the year, a user factory silver w/o keyring, a collector MTO unused with presentation box, a backup factory silver still with keyring, and a Bob Lessard custom Urban Pioneer bought a couple of years before the PX was released..jpeg)
-
-
-
This is a bit out of the ordinary for me:

This is a Pathfinder, the smaller version of two similar designs, by Treeman Knives. It is got a 4.25" blade made from 1/4" O-1 tool steel. It is incredibly well made, with superb fit and finish. While it starts out being 1/4" at the spine, the deep hollow grind over a broad blade gives it a keen edge and cutting profile. It came with a high-ride sheath that makes it surprisingly easy to wear, although it is a bit heavy.
I've used this knife a fair bit, but I have to say I think it's a knife I admire more than I love. For me, it is not quite as instinctive to use as some other more traditional knives.
Curious one this. It looks like to be designed to provide more pressure onto the blade at cutting?

-
-
Cheers, Nix and McStitchy :cheers. Cool story, SteveC!

-
Day 18
I got this Champ SOS Kit last year.
It came with A couple band aids,needles and thread and a safety pin.
I added the stuff pictured.
These are cool kits.

-
Day 18 (bonus action and commentary):
@comis said:
This particular knife reminds me a lot of Tom Brown Tracker.I think the larger version would remind you of the Tracker even more. Obviously, this one just has a single edge over the whole curve and no saw teeth on the spine. Jim Behring, the designer, has a background in custom hunting knives. I think this knife is a tactical take on a skinner. Or that's the way it looks to me.
@McStitchy said:
Curious one this. It looks like to be designed to provide more pressure onto the blade at cutting?
The back of the spine is wide and flat, before the raised swedge. This provides a great spot to place a thumb and direct a lot of pressure downward toward the edge. Also provides good control.
The choil is functional, too. I can get my index finger in the choil for more control with precise cutting.
The whole knife is so solid that I think you could apply a huge amount pressure into a cut with good control. The wide curving blade is good for slicing meat and I think would make a good skinner. I don't think this would be a great bushcrafting choice, but it carves pretty nicely.
Today was hummus making day: the Pathfinder trimmed and peeled garlic and sliced up a few lemons. The garlic never stood a chance. The lemons are big enough that the slice starts to turn into a wedging action. But I still got nice even cuts all the way through.

-
@Nix said:
Day 18 (bonus action and commentary):
The back of the spine is wide and flat, before the raised swedge. This provides a great spot to place a thumb and direct a lot of pressure downward toward the edge. Also provides good control.The choil is functional, too. I can get my index finger in the choil for more control with precise cutting.
The whole knife is so solid that I think you could apply a huge amount pressure into a cut with good control. The wide curving blade is good for slicing meat and I think would make a good skinner. I don't think this would be a great bushcrafting choice, but it carves pretty nicely.
Today was hummus making day: the Pathfinder trimmed and peeled garlic and sliced up a few lemons. The garlic never stood a chance. The lemons are big enough that the slice starts to turn into a wedging action. But I still got nice even cuts all the way through.


-
This is a bit out of the ordinary for me:

This is a Pathfinder, the smaller version of two similar designs, by Treeman Knives. It is got a 4.25" blade made from 1/4" O-1 tool steel. It is incredibly well made, with superb fit and finish. While it starts out being 1/4" at the spine, the deep hollow grind over a broad blade gives it a keen edge and cutting profile. It came with a high-ride sheath that makes it surprisingly easy to wear, although it is a bit heavy.
I've used this knife a fair bit, but I have to say I think it's a knife I admire more than I love. For me, it is not quite as instinctive to use as some other more traditional knives.
You keep showing awesome knives

Sent fra min FRD-L09 via Tapatalk
-
@Ron Who said:
Some of my fixed blades1st pic Kershaw Boot Knife and Böker Steel Ranger
2nd pic Böker Arbolito and BrowningNice selection of Fixies
@McStitchy said:
Day 18This is my Yeoman mod made from a compact and an old explorer... the rest became a Climber and was given away :)
It's getting used frequently... not only for office type situations...
I love the Yeoman toolset. Nice Yellow scales, too.
@Borg said:
Day 18 Hultafors Precision and Gerber Multi Lite
Nice combo. I love the blue color scale for the light.
This is my only Chinese made Buck , the little Solo. Not a bad little knife and I often carry it and use it for small work.
5CF74BD9-8E3C-4019-BDAD-A13502F265E1 by Duncan Moore, on FlickrNice little knife. I wasn’t aware that Buck had knives being made in China. It shouldn’t be a surprise considering most USA knife manufacturers are doing it.
@smiller43147 said:
**Day 18: **My little collection of the Pioneer X.
Left to right, a user MTO 2016 knife of the year, a user factory silver w/o keyring, a collector MTO unused with presentation box, a backup factory silver still with keyring, and a Bob Lessard custom Urban Pioneer bought a couple of years before the PX was released.Nice selection. The PX is a handy SAK
@Humayd A R Mahomedy said:
Day 18
I got this Champ SOS Kit last year.
It came with A couple band aids,needles and thread and a safety pin.
I added the stuff pictured.
These are cool kits.Nice kit. I think the thermometer, compass, magnifying glass tool is cool every time I see it.
-
@ChopperCharles said:
Day 14: Bladeless MP600 Pro Scout with Pocket ClipThis is my latest mod, I finished it last night. This is also my very first Gerber multitool, and it was the gateway drug that got me into this website and into multitools and knives in general. I think I paid $15 for it on eBay. After using it a while, I realized I really needed the large flat driver that the basic model has. First I got rid of the can opener, added the screwdriver and swapped in the plain edged blade from the basic model. I used it like that for a good long while... then I took the file to the grinder and gave it an edge on the tip, and then finished it on a whetstone. So now I have a gasket scraper blade on the tool. I needed a wood saw as well, so i searched around for some new jigsaw blades, and settled on some milwaukee bi-metal blades. I cut one so it was the maximum length it could fit in the tool, and then painted the cut edges. After a while I realized I always carried a knife, and my girlfriend's can opener sucked, so I swapped the can opener back in and got rid of the plain edged blade I had swapped in.
Then I started collecting other gerber tools, and put a clip on one of them and a Gerber Diesel saw in it, and that became my EDC for a long time. I decided I wasn't going to use any of my other MP600s unless they had pocket clips, so I've slowly been adding clips to all those tools. And it was about time I added one to my original first multitool, so I'll actually carry and use it again!
Charles
Very cool mod.
@Ron Who said:
Day 18Fox Forest 578
This was my dirty work knife before I had the Endura. I still use it sometimes.
Looks like it has definitely gotten some use
This is a bit out of the ordinary for me:

This is a Pathfinder, the smaller version of two similar designs, by Treeman Knives. It is got a 4.25" blade made from 1/4" O-1 tool steel. It is incredibly well made, with superb fit and finish. While it starts out being 1/4" at the spine, the deep hollow grind over a broad blade gives it a keen edge and cutting profile. It came with a high-ride sheath that makes it surprisingly easy to wear, although it is a bit heavy.
I've used this knife a fair bit, but I have to say I think it's a knife I admire more than I love. For me, it is not quite as instinctive to use as some other more traditional knives.
Interesting knife and nice write-up
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

