MTO Unleashed!
-
@Humayd A R Mahomedy said:
Day 19
Helping my uncle process sheep annually was a highlight of my early teen years,and,after saving,the Kershaw 1034 TF was the first good knife I bought. I dated the box 29/07/89,the day I bought the knife,a day after my 15th birthday. I used this knife to gut and skin sheep for a few years. Another special,albeit plain,piece.I really liked those early Kershaws.
-
Day 19
Pair of Queens covered with Winterbottom bone. #32 Congress and a 28 Jack knife. Most people today call a Jack knife like the 28 a English Jack.
-
A+ on the Wenger Handyman, Charles. Carrying it for all those years makes it even more special.

-
@comis said:
That's a good read, and I am curious, what CD did you buy? I quite like the Juice offering, it fills the gap between full size and pocket tools nicely, and can never fully understand why LM decided to end that line.The CD was Bryan Adams “So Far, So Good”. The funny thing was one of the songs on it had its own story from my college semester in Spain
The Juice is a great little tool and a lot of character as well.
-
Day 19 C33 and Eldris

Nice pair. Never owned a Mora but they always strike me as a simple no frills good tool
@Humayd A R Mahomedy said:
Day 19
Helping my uncle process sheep annually was a highlight of my early teen years,and,after saving,the Kershaw 1034 TF was the first good knife I bought. I dated the box 29/07/89,the day I bought the knife,a day after my 15th birthday. I used this knife to gut and skin sheep for a few years. Another special,albeit plain,piece.Great story and nice knife
Nice pair. They go so well together
@Fuzzbucket said:
Latin Fuzz Day 19I've had mixed experiences with Maserin knives, some of them have been real shockers. This one however is superb - fantastic fit n finish with super-tight tolerances. I bought it for my brother one Christmas... he never used it.
Beautiful knife. I can see why someone might want to keep it as a shelf queen.
Pair of Queens covered with Winterbottom bone. #32 Congress and a 28 Jack knife. Most people today call a Jack knife like the 28 a English Jack.
Nice pair of Queens, especially the Jack
-
@ChopperCharles said:
Day 15: Wenger Handyman - My Original Boy Scouts Pocket KnifeThis is my Wenger Handyman. I've had this knife since I was 12 years old. I'm 42 now. From 12-40 this was the only SAK I had ever owned. 28 years of SAK monogamy, and 30 years of ownership. The Sheath is something I made. In one of the boy scout camps I took a leatherworking class, and I was pretty good at it. So I got the big kit and made my own sheath. I also made a sheath for my dad, but he never used it. (he wasn't a knife guy, pocket or otherwise). It's a bit too big for a SAK, and I always pocket carry the knife. But when I'm not using it, it's stored in the sheath just because I made it.
The knife is now a hot mess. Bottle opener rivet has popped when used as a pry bar one too many times. Scales are beyond repair. Awl has a blunted tip. Scissor pivot is loose, and the blade tip is chipped. But it is a 30 year old knife that was used and abused. Every motorcycle trip I have ever taken, this knife was with me (Until the rivet popped). I never lost it in 30 years. I carried it in high school and never got caught, I carried it through an airport once and it wasn't confiscated (but I was still a kid, so it was a looooong time ago). This is my old friend.
I've gotten a Wenger from the same era, with the same tang stamping and I'm going to fix the blade. I will probably just file the awl back to sharp, and see if i can locktite the pivot (the threads are there, the screw just keeps backing out). I'll refresh the backsprings (pre-bend them by hand), clean everything, and put it all back together again, just like it was. The only difference is I have some walnut scales that will go on instead of the original plastic. I just need to have them engraved first.
I'm a little resistant to doing this for some reason, though. Just seeing this knife, with it's patina, its battle scars, it brings me joy thinking of all the times it's been by my side. I'm also sad that it's in an unusable state right now. Part of me wants to leave it as-is, and part of me wants to fix it. Is that weird?
Charles.
Awesome story. Sorry to hear that it is a mess now. Hopefully you can fix it.
@Nix said:
Day 19: (Happy Juneteenth!)Today the call went out to the Syph007 Compacter. My favorite EDC!
That is a simple beauty. His customs are works of art.
@smiller43147 said:
**Day 19: **I think you're going to see a lot of SAKs and Leatherman from here on out.
My collection of Highlanders and Commanders. I love the 1 and 2 layer 85mm Wengers with traditional scales.
Just the right size. The three in the bottom left are the Commanders.
The top two on the right are Fire Highlanders, with the red translucent scales. Prettiest two I have.
Close up of the old one with the bail and dogleg can opener and cut file.Beautiful collection
@McStitchy said:
Day 19Today the Aqua Blue Pioneer (LE2020) helped removing some protective film that wouldn't tear off easily otherwise.
I love the Pioneer model for its easy carry and awl :D
Love that blue
-
Day19
I'll look in my old desk drawer now moved and repurposed into a sewing table. This is all quick grab tools and a little bit of drawing and layout stuff kept handy for small projects. All this will probably be transferred to a new workbench when I get set up.3 multi tools are visible in the photo:
A modified Leatherman Micra. By modified this had the plastic plastic shell which has broken off and replaced with washers for bolt spacing
The Stanley licence of the SOG Pocket Power Plier.
And the Shrade ST1 that was a gift from MTO member gerleatherberman during the Shrade tough 30 day challenge. My wife likes this one because the tools are accesable, so it will probably stay here for machine adjustments.
Comis
To answer your question about the hole in the etoh's blade...I do believe bieng an agricultural tool that the hole is meant for hanging.
-
The purple Leatherman Juice XE6. This is a tough little multiool that has seen a lot and always reminds me of a hard working ship on a very hard working deployment with one of the best crews.
I can relate to this post! I remember circling in the Gulf for so long I saw fist fights break out over whose turn it was to fetch the water for the coffee maker (Stennis CVN-74). LOL! I've bought 2 of those XE6 Juice's. I think they are probably the toughest and most versatile of the smaller Leatherman tools. I sharpened the blade of one of them to a surgical edge and didn't even feel it when I flipped it closed and it bit me something terrible. That was one of those super glue and electrical tape moments for me.
One of those is in the pocket of the sheath of my Ka-Bar BK-16. All bases covered in the woods with that setup. -
DAY 19
This is a knife that honestly I don't know if I've ever used or will ever use, but man it looks cool. (I guess it falls into that "That's not a knife" meme category). Even as a combat knife, the sheath system is lousy and the knife itself wouldn't be that great for the task. Probably has a lot to do with why they stopped making them. So it sits in the collection to look cool. That's its job!
SOG TigerShark Elite
-
@CraftsmanSAK said:
DAY 19
This is a knife that honestly I don't know if I've ever used or will ever use, but man it looks cool. (I guess it falls into that "That's not a knife" meme category). Even as a combat knife, the sheath system is lousy and the knife itself wouldn't be that great for the task. Probably has a lot to do with why they stopped making them. So it sits in the collection to look cool. That's its job!
SOG TigerShark EliteI think most of us have one of those knives whose justification is “It looks cool”

-
Day 19
Today is another Yeoman based Mod - my Mountain Yeoman. This SAK was part of a trade with comis. I got the better end, especially with all the effort he put into making the scales so awesome.And they even glow

-
@Sos24 said:
I think most of us have one of those knives whose justification is “It looks cool”

That was my justification, when instead of a small, four-inch blade antique American-made hunting knife, I bough t(for about the same money) Camillus Marine Combat (their version of the Kabar) for $25. It is pretty tough, but way too danged big for 75% of my cutting chores.
-
Day 19.
Victorinox 84mm Craftsman. Like a Wenger Handyman, just rare, and quite often, a lot more expensive (mine came in a lot with a Wenger Master, a Victorinox Recruit, and some very high-quality leather belt sheaths for $40). But it's cooler and has better scissors. It was a shelf queen for only a short time, despite its rarity. The smaller 84mm frame and the lack of lanyard ring mean it carries very well. It's a bit of a mutt due to some repair work by Victorinox. The scales and scale tools are modern (I still have the original scales and tweezers put away), the large blade is from the 1980s (original was fine, just scratched badly), the scissors were jerry-rigged and busted (brass pin replacing screw, no spring) and thus got replaced with 1970s era scissors (which I'm surprised Vic still even had!). Liners have been replaced as well, likely owing to the fact they are prone to cracking as on the Ranger I showed earlier in this challenge. This Craftsman has already seen a lot of use, being my main carry in the Fieldmaster challenge in February. It really hasn't been carried since for some reason.
Was my only carry today. Tools used; both blades for general cutting, as well as the can opener SD (tightening up stock on air rifle).

-
Day 16: Weird SAK-a-like with anvil cutters
This is a weird eBay find my friends. I snagged it for like seven dollars, and it's the most unique SAK-copy I've come across. While I've seen this type of pliers once or twice in the past, this is the first time I've ever seen a pair of actual anvil-type wire cutters on a SAK of any style. So of course I had to buy it. It came with completely smurfy springs and broke-ass scales, but I restored it with Victorinox springs and Schrade Century scales (I liked the sea green color and they're 100% compatible with Victorinox knives). This is in every way compatible with a 91mm Victorinox SAK. I bought it with modding in mind, and intended to put the wire cutters in a custom Victorinox SAK. But you know, I've actually never seen another one of these in the last couple of years, so I'm not sure tearing it apart is the best idea. It's a copy yes, but it's unique and arguably rare. So for now I'm keeping it as-is.
All of the tools had huge bumps for the nail nicks, which actually got in the way of using the nicks. So I filed them down until each tool was easy to deploy. So it's not stock, and so even if it might be rare, it's not worth anything... but you know what? I made it eminently usable. The tools have no wobble and they're made out of decent steel. The quality is not Victorinox by any means, but it's actually not bad. It's way, way WAY better than the smurphy Coast knockoffs of the Cybertool. The wire cutter easily handles up to about 18ga wire. 16ga requires a bit more force, and 14ga requires a TON of force. (stranded copper of course). I was thinking the wire cutters would be excellent to add to a Victorinox Cybertool, to make a knife that's all about light electronics work. And I may still do that someday. But in the meantime, I'm enjoying bringing this out every now and then to work on an odd set of speakers or an old metronome.
If anyone knows any information about this knife, I'd love to hear more.
Charles.

-
@CraftsmanSAK said:
DAY 19
This is a knife that honestly I don't know if I've ever used or will ever use, but man it looks cool. (I guess it falls into that "That's not a knife" meme category). Even as a combat knife, the sheath system is lousy and the knife itself wouldn't be that great for the task. Probably has a lot to do with why they stopped making them. So it sits in the collection to look cool. That's its job!
SOG TigerShark Elite
Have seen one in the flesh so to speak, they’re a beast of a knife. -
Victorinox 84mm Craftsman. Like a Wenger Handyman, just rare, and quite often, a lot more expensive (mine came in a lot with a Wenger Master, a Victorinox Recruit, and some very high-quality leather belt sheaths for $40). But it's cooler and has better scissors. It was a shelf queen for only a short time, despite its rarity. The smaller 84mm frame and the lack of lanyard ring mean it carries very well. It's a bit of a mutt due to some repair work by Victorinox. The scales and scale tools are modern (I still have the original scales and tweezers put away), the large blade is from the 1980s (original was fine, just scratched badly), the scissors were jerry-rigged and busted (brass pin replacing screw, no spring) and thus got replaced with 1970s era scissors (which I'm surprised Vic still even had!). Liners have been replaced as well, likely owing to the fact they are prone to cracking as on the Ranger I showed earlier in this challenge. This Craftsman has already seen a lot of use, being my main carry in the Fieldmaster challenge in February. It really hasn't been carried since for some reason.
Was my only carry today. Tools used; both blades for general cutting, as well as the can opener SD (tightening up stock on air rifle).

Sometimes mutts are the best companion and some knifes just aren’t meant to be shelf queens.
-
@ChopperCharles said:
Day 16: Weird SAK-a-like with anvil cuttersThis is a weird eBay find my friends. I snagged it for like seven dollars, and it's the most unique SAK-copy I've come across. While I've seen this type of pliers once or twice in the past, this is the first time I've ever seen a pair of actual anvil-type wire cutters on a SAK of any style. So of course I had to buy it. It came with completely smurfy springs and broke-ass scales, but I restored it with Victorinox springs and Schrade Century scales (I liked the sea green color and they're 100% compatible with Victorinox knives). This is in every way compatible with a 91mm Victorinox SAK. I bought it with modding in mind, and intended to put the wire cutters in a custom Victorinox SAK. But you know, I've actually never seen another one of these in the last couple of years, so I'm not sure tearing it apart is the best idea. It's a copy yes, but it's unique and arguably rare. So for now I'm keeping it as-is.
All of the tools had huge bumps for the nail nicks, which actually got in the way of using the nicks. So I filed them down until each tool was easy to deploy. So it's not stock, and so even if it might be rare, it's not worth anything... but you know what? I made it eminently usable. The tools have no wobble and they're made out of decent steel. The quality is not Victorinox by any means, but it's actually not bad. It's way, way WAY better than the smurphy Coast knockoffs of the Cybertool. The wire cutter easily handles up to about 18ga wire. 16ga requires a bit more force, and 14ga requires a TON of force. (stranded copper of course). I was thinking the wire cutters would be excellent to add to a Victorinox Cybertool, to make a knife that's all about light electronics work. And I may still do that someday. But in the meantime, I'm enjoying bringing this out every now and then to work on an odd set of speakers or an old metronome.
If anyone knows any information about this knife, I'd love to hear more.
Charles.
Definitely an interesting knife
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

