MTO Unleashed!
-
Day 20

I remembered growing up, young kids usually only had a few aspiration what they wanted to be when they grow up. It was either policeman, fireman or astronaut.
Years later, the same question was posed to my college classmates in a foreign language class, and one kid told the class he had always wanted to be Gozilla growing up. I still remembered sitting right next to him, and almost spilled my coffee that morning.
ZT470, though I never like carbon fibre in knife scale, I do like what Sinkevich did with this design. The fine lines along the chassis is very signature of Sinkevich design, and I felt it was a great touch to give it more class. -
@smiller43147 said:
**Day 19: **I think you're going to see a lot of SAKs and Leatherman from here on out.
My collection of Highlanders and Commanders. I love the 1 and 2 layer 85mm Wengers with traditional scales.
Just the right size. The three in the bottom left are the Commanders.
The top two on the right are Fire Highlanders, with the red translucent scales. Prettiest two I have.
Close up of the old one with the bail and dogleg can opener and cut file.What is the difference between a Fire highlanders vs highlander?
Day 19 C33 and Eldris

I always think C33 is a great knife-tool offering from LM.
@Sos24 said:
The CD was Bryan Adams “So Far, So Good”. The funny thing was one of the songs on it had its own story from my college semester in SpainThe Juice is a great little tool and a lot of character as well.
Oh, Bryan Adams! I still remembered the song "everything I do I do it for you" was such a hit, with the Robin Hood movie.
@Noa Isumi said:
Day19
I'll look in my old desk drawer now moved and repurposed into a sewing table. This is all quick grab tools and a little bit of drawing and layout stuff kept handy for small projects. All this will probably be transferred to a new workbench when I get set up.3 multi tools are visible in the photo:
A modified Leatherman Micra. By modified this had the plastic plastic shell which has broken off and replaced with washers for bolt spacing
The Stanley licence of the SOG Pocket Power Plier.
And the Shrade ST1 that was a gift from MTO member gerleatherberman during the Shrade tough 30 day challenge. My wife likes this one because the tools are accesable, so it will probably stay here for machine adjustments.
Comis
To answer your question about the hole in the etoh's blade...I do believe bieng an agricultural tool that the hole is meant for hanging.
-
@CraftsmanSAK said:
DAY 19
This is a knife that honestly I don't know if I've ever used or will ever use, but man it looks cool. (I guess it falls into that "That's not a knife" meme category). Even as a combat knife, the sheath system is lousy and the knife itself wouldn't be that great for the task. Probably has a lot to do with why they stopped making them. So it sits in the collection to look cool. That's its job!
SOG TigerShark Elite@Sos24 said:
I think most of us have one of those knives whose justification is “It looks cool”I think every knife enthusiast probably have one or two big cool knives in their stash, whether it is practical or not is irrelevant.
@Sos24 said:
Day 19
Today is another Yeoman based Mod - my Mountain Yeoman. This SAK was part of a trade with comis. I got the better end, especially with all the effort he put into making the scales so awesome.And they even glow

Thank you, you are too kind with words, I use that HDS rotary every night since I got it, definitely love how robust that thing is and the color retention is fantastic!
-
@ChopperCharles said:
Day 16: Weird SAK-a-like with anvil cuttersThis is a weird eBay find my friends. I snagged it for like seven dollars, and it's the most unique SAK-copy I've come across. While I've seen this type of pliers once or twice in the past, this is the first time I've ever seen a pair of actual anvil-type wire cutters on a SAK of any style. So of course I had to buy it. It came with completely smurfy springs and broke-ass scales, but I restored it with Victorinox springs and Schrade Century scales (I liked the sea green color and they're 100% compatible with Victorinox knives). This is in every way compatible with a 91mm Victorinox SAK. I bought it with modding in mind, and intended to put the wire cutters in a custom Victorinox SAK. But you know, I've actually never seen another one of these in the last couple of years, so I'm not sure tearing it apart is the best idea. It's a copy yes, but it's unique and arguably rare. So for now I'm keeping it as-is.
All of the tools had huge bumps for the nail nicks, which actually got in the way of using the nicks. So I filed them down until each tool was easy to deploy. So it's not stock, and so even if it might be rare, it's not worth anything... but you know what? I made it eminently usable. The tools have no wobble and they're made out of decent steel. The quality is not Victorinox by any means, but it's actually not bad. It's way, way WAY better than the smurphy Coast knockoffs of the Cybertool. The wire cutter easily handles up to about 18ga wire. 16ga requires a bit more force, and 14ga requires a TON of force. (stranded copper of course). I was thinking the wire cutters would be excellent to add to a Victorinox Cybertool, to make a knife that's all about light electronics work. And I may still do that someday. But in the meantime, I'm enjoying bringing this out every now and then to work on an odd set of speakers or an old metronome.
If anyone knows any information about this knife, I'd love to hear more.
Charles.
That shear definitely is a unique tool that never seen on Vic, cool find!
@Rizio Il Ghiro said:
That’s very unusual! You got a great trade there, Sos24, those are great looking scales! What did Comis put in there beyond the Yeoman basics, a metal saw/file and anything else? Great looking SAK! 
Rizio, that mod is based derived from a Swisschamp, so besides the Yeoman tools, it also has a metal file and chisel at the back side.
@Storm said:
Comis, the woodwork is a serving bowl that folds down flat I picked up in Afghanistan.Day 20
My Spartan that my sister in law brought back from the factory in Ibach. Often used as my formal dress knife as black is always classic 🙂That was a great looking serving bowl, and I can imagine how much it would cost if it were made in Europe or US. Very cool find!
-
So many great knives and SAKs

-
DAY 20
3 knives : SCHRADE COLUMBIA and Smith&Wesson



-
@Sos24 said:
Nice pair. Never owned a Mora but they always strike me as a simple no frills good toolThey are that, and a good price too but for some reason the Eldris is more expensive, they are overpriced but sometimes they can be found for an ok amount
@comis said:
I always think C33 is a great knife-tool offering from LM.Good little backup knife

-
Powernoodle Day 20
*
Land 912.* -
Latin Fuzz (pars duorum) Day 20
Another Maserin today, a lovely little Hawkbill Pruner... or rather it should be. This knife frustrates the hell out of me, what should be a highly desirable knife - a sub three inch stag Hawkbill - is ruined by sloppy workmanship and poor attention to detail on the fit n finish. Was a gift for the old man.

-
@powernoodle said:
Powernoodle Day 20
*
Land 912.*I see you pulled the trigger :D
How do you like it ?
-
@Fuzzbucket said:
Latin Fuzz (pars duorum) Day 20Another Maserin today, a lovely little Hawkbill Pruner... or rather it should be. This knife frustrates the hell out of me, what should be a highly desirable knife - a sub three inch stag Hawkbill - is ruined by sloppy workmanship and poor attention to detail on the fit n finish. Was a gift for the old man.

That's too bad as it's a nice looking knife :-\
-
Bonus shot showing the inconsistent fit n finish on the Maserin knives - Pruner on the right, yesterday's Hunter on the... left.

-
@ReamerPunch said:
I've seen one of those posted before. It's so nice!
Was it by me? :) Or someone else?
Charles.
-
@ChopperCharles said:
Was it by me? :) Or someone else?Charles.
No idea, it was so long ago.

-
Thanks for the info Sos24 and Comis - great mod, and perhaps one to have a go out next time I can get some cheap Compacts and a mountaineer!

Great knives and photos everyone!
-
Day 20
Böker Fellow

-
@SteveC said:
I see you pulled the trigger :DHow do you like it [Land 912]?
Well, I definitely bought the knife after seeing your variant.
I've always been a fan of Chinese knives in the Sanrenmu/Ganzo genre, as you get a lot of knife for the money. I don't know anything about "Land", though it may very well come out of the same factory as the others. This Land 912 is remarkably well-done in terms of fit and finish. The action is very smooth, and it just has a quality feel that belies its $22 price.I own a few Chris Reeve knives, including a couple of Sebenzas. The Land 912, which is clearly an homage to (ripoff of) the Sebenza, has about 95% of the fit, finish and feel of the Sebenza at 5% of the cost. Of course you are getting 12C27 blade steel and not S35VN, along with steel scales in place of the Sebenza's titanium. I have not yet put it through its paces, but it arrived razor sharp and the quality build makes me expect it to be a winner.
*
Sebenza Classic 2000, bottom, with Land 912.*
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

