MTO Unleashed!
-
Day 21
Continuing with the one-piece knife theme,a slightly larger knife,from SA knifemaker Derek Rausch.
I bought this 1 in 96,steel is D2


-
@pfrsantos said:
**Day 21: **A (very) cheap knock-off of Fury's Sky Hawk. Some of you might remember seeing it used by John Locke, in Lost.
That is actually very cool
Even if it is a cheap knock-off.Sent fra min FRD-L09 via Tapatalk
-
@CraftsmanSAK said:
DAY 21
TOPS/Buck CSAR-T Folder. Rescue tool version with a belt cutter, glass breaker, and the other side of the handle has a hex bit holder built in. This is one beefy folder and it's got some weight to it. Definitely not one you would want to carry in your pocket. I hope to get one of the 154CM versions without the rescue tool setup on the end sometime soon. The newer ones have a Rocky Mountain tread pattern that is cool looking in the G10 scales as well. I didn't think I would like the modified tanto on these CSAR-T lines, but that rounded portion of the modified tanto is an excellent cutting edge and easier to sharpen (by hand) than I thought it would be. I need to post my CSAR-T necker that kind of rounds this out before the challenge is over.Did not know they made a CSAR necker, can't wait to see it!
Sent fra min FRD-L09 via Tapatalk
-
Day 21. 2019 Buck USA 283 Nano Bantam.
I had been carrying this Buck Nano Bantam last night when I changed into my shorts and was lounging around the house. Left it in my pocket, and noticed it was still iln there when I got up. Most of what I did today was just lounging around the house,so I didn't need anything better.
I bought this knife in October at Tractor Supply as a part of a Christmas deal two-pack with the 285 Bantam BLW shown earlier in this challenge for $20. Having already owned an orange camo version of the 283, I was gonna give it away. But, I began carrying it around the house a lot, using it for light-duty stuff, and found how comfortable it was to carry around and use. The ergonomics are really good for a 3" closed knife.
Buck offers all sorts of camo patterns in many colors on the Bantams, but they are a hydro-dip process, which results in them making the handles slicker, and the pattern starts to wear in a week. Yet if you want bare plastic handles, they take the Ford Model T approach--black is all you get. I'd love to see some of the colors they have offered the 110LT and 112LT Slim Selects in.
Especially red, green, blue, and orange.
-
Day 21 (Happy Father's Day!):
So I'm going to tell you about today's knife. I'm pretty sure that most of what I say will be accurate, but there may be a few embellishments or details of uncertain veracity. Just sayin'....
This is the wickedly sharp Laconico Nessmuck:

So...right away I'm on thin ice. This is definitely a Ray Laconico knife. I got it from him and it has his stamp on it. But I'm not sure if Ray called it a Nessmuk or I did. And I can't remember if this was a knife Ray made for fun or I asked him to make. I'm going to go with this story: I asked Ray to make me his version of a Nessmuk. And this is the knife he made.
Diehard Nessmuk fans will declare that this is not a Nessmuk, but I beg to differ. Call it a leaf-blade if you must, but I think Ray took the concept of the Nessmuk and refined it. To me this looks like a humpbacked version of a chopped down butcher's knife. And like the original Nessmuk, it's a real worker.
Specs: a full-tang blade made from 1/8" 1095 with a full-flat grind and a micro convex edge (Ray may have put a V-grind on the edge, but in my hands it wears a micro-convex edge). The scales are pinned walnut. The OAL is a bit over 9.25" and the blade is approximately 4.5".
I'll confess, it is a bit large for an EDC, and I felt a bit conspicuous wearing this to the grocery store; however, Ray made a great sheath for it and it is a light knife. (That 1/8" steel keeping the knife light and lively.) The wide blade mean this knife 'tracks' well as it cuts. It works well as a butcher knife, it has enough 'belly' to be a good game knife. The thin steel and FFG make this a great slicer. It rocks well on a cutting board, too. The symmetric grip works very nicely with any grip or in any direction. This knife inherently feels versatile.
I don't think I've batonned with this knife. I'm sure it would handle small stuff well, but the thin steel is probably not ideal for batonning wet wood on a cold day. Nevertheless, this knife is meant for real life and regular use. In that role--spreading peanut butter or cutting string for staking tomatoes--it excels. I've taken it camping and it has served well. I can't say this is my favorite fixie, but it is right up there.
Today I made a big pot of Sambar, the South Indian soup of renown. (I make a kick-ass Sambar, if I say so myself, and no Indian Aunties are consulted.) This soup uses a ton of various veggies, and it gave me a chance to put the Laconico through its paces.
Chopping onion, brilliant:

Chopping carrots, excellent:

The Laconico even diced up an Acorn Squash:

In addition, I used it to cut up tomatoes, basil leaves, Bell peppers, green chiles, garlic, and string beans. The Laconico Nessmuk took on all comers and handled each with ease.
I doesn't look like much, but I think Ray channeled his inner Nessmuk when grinding out this one. That's my story and I'm sticking to it. ;)
-
Day21
Vic Mechanic, this one is one of the Marlboro miles point knives with their logo on the front and the Victorinox shield on the back. (sry forgot pic of other side)
-
Nix, I like that knife. Can see the Nessmuck hertiage.
-
@Nix said:
Day 21 (Happy Father's Day!):So I'm going to tell you about today's knife. I'm pretty sure that most of what I say will be accurate, but there may be a few embellishments or details of uncertain veracity. Just sayin'....
This is the wickedly sharp Laconico Nessmuck:

So...right away I'm on thin ice. This is definitely a Ray Laconico knife. I got it from him and it has his stamp on it. But I'm not sure if Ray called it a Nessmuk or I did. And I can't remember if this was a knife Ray made for fun or I asked him to make. I'm going to go with this story: I asked Ray to make me his version of a Nessmuk. And this is the knife he made.
Diehard Nessmuk fans will declare that this is not a Nessmuk, but I beg to differ. Call it a leaf-blade if you must, but I think Ray took the concept of the Nessmuk and refined it. To me this looks like a humpbacked version of a chopped down butcher's knife. And like the original Nessmuk, it's a real worker.
Specs: a full-tang blade made from 1/8" 1095 with a full-flat grind and a micro convex edge (Ray may have put a V-grind on the edge, but in my hands it wears a micro-convex edge). The scales are pinned walnut. The OAL is a bit over 9.25" and the blade is approximately 4.5".
I'll confess, it is a bit large for an EDC, and I felt a bit conspicuous wearing this to the grocery store; however, Ray made a great sheath for it and it is a light knife. (That 1/8" steel keeping the knife light and lively.) The wide blade mean this knife 'tracks' well as it cuts. It works well as a butcher knife, it has enough 'belly' to be a good game knife. The thin steel and FFG make this a great slicer. It rocks well on a cutting board, too. The symmetric grip works very nicely with any grip or in any direction. This knife inherently feels versatile.
I don't think I've batonned with this knife. I'm sure it would handle small stuff well, but the thin steel is probably not ideal for batonning wet wood on a cold day. Nevertheless, this knife is meant for real life and regular use. In that role--spreading peanut butter or cutting string for staking tomatoes--it excels. I've taken it camping and it has served well. I can't say this is my favorite fixie, but it is right up there.
Today I made a big pot of Sambar, the South Indian soup of renown. (I make a kick-ass Sambar, if I say so myself, and no Indian Aunties are consulted.) This soup uses a ton of various veggies, and it gave me a chance to put the Laconico through its paces.
Chopping onion, brilliant:

Chopping carrots, excellent:

The Laconico even diced up an Acorn Squash:

In addition, I used it to cut up tomatoes, basil leaves, Bell peppers, green chiles, garlic, and string beans. The Laconico Nessmuk took on all comers and handled each with ease.
I doesn't look like much, but I think Ray channeled his inner Nessmuk when grinding out this one. That's my story and I'm sticking to it. ;)
The size and blade shape, to me, are oddly perfect. To me, a 4.5" blade is where it's at on a fixed blade. Big enough to do basically anything, while small enough to not be obtrusive on the belt (like my Kabar that hangs up on every piece of equipment I get on or get off).
-
Day 22

"Doh! It's only Monday!"
These are few interesting CRKT I have collected, M16 at the bottom has a switch to secure it's liner lock, so it won't deactivate while your blade is out. The Endorser in middle is an assisted knife, and has a thumbstud 'switch' to release the blade from the detent, and they call this mechanism 'outburst' assist. Top knife the Cuatro, I simply like it's simplicity and very light weight design.
-
@Sos24 said:
Great knife and memoryGreat tool and story

Today’s knife is the Gerber Pocket Square. I really like the design of this and would love one in a better grade steel
310CE6D4-FA96-44DF-8D00-EE988AEFF6F1 by Duncan Moore, on FlickrI think this is a relatively recent offer, and remember seeing this from youtube bladeshow previews. It's a pretty cool design and if you like this, maybe take a look at the CRKT Cuatro I posted too.
:D -
This reminded so much of what Sos24 posted earlier, I think it was a knife inherited from her grandfather. Small world!

A couple of Camillus knives, a US Air Corp Utility and a #11 Barlow

Very nice!

@CraftsmanSAK said:
DAY 21
TOPS/Buck CSAR-T Folder. Rescue tool version with a belt cutter, glass breaker, and the other side of the handle has a hex bit holder built in. This is one beefy folder and it's got some weight to it. Definitely not one you would want to carry in your pocket. I hope to get one of the 154CM versions without the rescue tool setup on the end sometime soon. The newer ones have a Rocky Mountain tread pattern that is cool looking in the G10 scales as well. I didn't think I would like the modified tanto on these CSAR-T lines, but that rounded portion of the modified tanto is an excellent cutting edge and easier to sharpen (by hand) than I thought it would be. I need to post my CSAR-T necker that kind of rounds this out before the challenge is over.That looks so hefty, how much does it weight?

-
@Nix said:
Day 21 (Happy Father's Day!):So I'm going to tell you about today's knife. I'm pretty sure that most of what I say will be accurate, but there may be a few embellishments or details of uncertain veracity. Just sayin'....
This is the wickedly sharp Laconico Nessmuck:

So...right away I'm on thin ice. This is definitely a Ray Laconico knife. I got it from him and it has his stamp on it. But I'm not sure if Ray called it a Nessmuk or I did. And I can't remember if this was a knife Ray made for fun or I asked him to make. I'm going to go with this story: I asked Ray to make me his version of a Nessmuk. And this is the knife he made.
Diehard Nessmuk fans will declare that this is not a Nessmuk, but I beg to differ. Call it a leaf-blade if you must, but I think Ray took the concept of the Nessmuk and refined it. To me this looks like a humpbacked version of a chopped down butcher's knife. And like the original Nessmuk, it's a real worker.
Specs: a full-tang blade made from 1/8" 1095 with a full-flat grind and a micro convex edge (Ray may have put a V-grind on the edge, but in my hands it wears a micro-convex edge). The scales are pinned walnut. The OAL is a bit over 9.25" and the blade is approximately 4.5".
I'll confess, it is a bit large for an EDC, and I felt a bit conspicuous wearing this to the grocery store; however, Ray made a great sheath for it and it is a light knife. (That 1/8" steel keeping the knife light and lively.) The wide blade mean this knife 'tracks' well as it cuts. It works well as a butcher knife, it has enough 'belly' to be a good game knife. The thin steel and FFG make this a great slicer. It rocks well on a cutting board, too. The symmetric grip works very nicely with any grip or in any direction. This knife inherently feels versatile.
I don't think I've batonned with this knife. I'm sure it would handle small stuff well, but the thin steel is probably not ideal for batonning wet wood on a cold day. Nevertheless, this knife is meant for real life and regular use. In that role--spreading peanut butter or cutting string for staking tomatoes--it excels. I've taken it camping and it has served well. I can't say this is my favorite fixie, but it is right up there.
Today I made a big pot of Sambar, the South Indian soup of renown. (I make a kick-ass Sambar, if I say so myself, and no Indian Aunties are consulted.) This soup uses a ton of various veggies, and it gave me a chance to put the Laconico through its paces.
Chopping onion, brilliant:

Chopping carrots, excellent:

The Laconico even diced up an Acorn Squash:

In addition, I used it to cut up tomatoes, basil leaves, Bell peppers, green chiles, garlic, and string beans. The Laconico Nessmuk took on all comers and handled each with ease.
I doesn't look like much, but I think Ray channeled his inner Nessmuk when grinding out this one. That's my story and I'm sticking to it. ;)
I know you have collected a good amount of Nessmuk designs, will this be your candidate for the Nessmuk Challenge this fall? I still haven't made up my mind!
:D -
DAY 22
2 Smith & Wesson knives



-
@comis said:

I think this is a relatively recent offer, and remember seeing this from youtube bladeshow previews. It's a pretty cool design and if you like this, maybe take a look at the CRKT Cuatro I posted too.
:DYes I like the look of that
I’ve never owned a CRKT knife but a friend bought a M16 and I was impressed with it. -
DAY 22
This is one of my favourites, once again I wish it had better blade steal and I believe Gerber are bringing out a fastball version but it’s expensiv.
Gerber Flatiron with aluminium scale.
980B0704-54FB-464F-9891-9705AB83B62D by Duncan Moore, on Flickr
66D30902-E0C6-4CE8-B4E7-D3392D0A6D37 by Duncan Moore, on Flickr
9C9C0FBF-3B19-4076-B4AE-7B849A1752F8 by Duncan Moore, on Flickr -
2 Smith & Wesson knives

Cool!
@Dunc said:
Yes I like the look of that
I’ve never owned a CRKT knife but a friend bought a M16 and I was impressed with it.Some hobbyists may not think much of the CRKT and Kershaw use of steel, but I for one am thankful for their offering. The less expensive price tags do allow folks to try different patterns without breaking the bank. Kershaw is particular smart in that strategy, many ZT offerings can find its synonym in Kershaw line, so people could try them out before getting the more premium version.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
