MTO Unleashed!
-
@Borg said:
Hopefully one day, i'm OK in rough seas but this was something else, depends a lot on the boat of course but you know it's bad when even the locals are turning green :D
Cat and Pioneer for scale, need two hands for this one :D

That's just the sort of thing i am looking for, i much prefer that to both on the same blade


In all seriousness, that is a nice looking knife
-
@cody6268 said:
I would strongly avoid the Carolina Knife and Tool-made Winchesters and many Smith and Wesson knives, but many are quite good.Remington. From the 1920s until right after WWII (after which they merged with PAL Cutlery), they made their own knives. In the 1970s, Bowen Knife Co. made the Bullet Knife. In the late '80s, Camillus picked up the contract and made many traditional and modern patterns. Bear and Son produced a lot of different patterns as well after Camillus closed, and right up until 2-3 years ago when Buck bought the Remington knife license, and those vary from overpriced 301s as the "Bullet" knife, to inexpensive imports using 420J2 steel. Fox in Italy also made a series in 2006 (and those are amazing!) However, some are cheap knvies to be avoided made to be sold in cheap gift sets at Christmastime and the lik.e
Winchester. They made their own knives in the 1910s-1930s. Over the years, through Blue Grass Cutlery, Queen produced some knives. While inexpensive Orient-made knives, there are some Blue Ridge Winchesters that are very good for the sub $20 price tag. The ones you'll find at Walmart (made by Carolina Knife and Tool, owned by Gerber) are horrible. But, there's a super-cheap version of the Gerber Multiplier they used to sell that I quite like. It's way cheaper than the MP600 Fisherman; even used despite being as uncommon (due to the fact its MSRP was ten bucks).
Browning. Their current offerings are all over on the quality scale, with many being very good (I own none, however). Before then, there was the Tracker series by Gil Hibben in the '70s (I own one), some traditional knives produced in the USA and Germany, as well as a line of both traditional and modern designs produced in Japan in the 1990s.
Ruger. Currently, CRKT produces a rather neat looking lineup of products. Case had the license before that. Various companies have had the license, and some they've made up for gift/promotional purpose as well.
That's just the ones you'll find the most often.
Thanks for the information. I find it interesting all the swapping of who makes different beands.
@Borg said:
This Colt is a nice little thing, China made again but well enough made

Gorgeous scales
@Ron Who said:
Day 24Byrd Wings
I´m a big fan of the dyad pattern and the Byrd Wings Slipit, that´s the small one, used to be my EDC when I worked in the Jumbo DC. It´s a sturdy and well made slipjoint knife, whereas the large one has liner locked blades. I never used the large knife.
There´s a dyad club here on MTO: /topic/72189
Those are interesting little knives. A couple of the Spyderco Byrd knives have caught my eye
@Nix said:
Day 24 (Happy Battle of Bannockburn Day!):Today's carry is the delightful BRK 'Wayfarer'. What's not to love? 3.5" blade in CPM-154 and built to last (like all BRK knives). The handle is distinctly small, however the ergos on this knife are still really good. I typically use it with a 3.5 finger grip, but a 4 finger grip is possible.
The knife sits deeply in a great little leather sheath; however, drawing the knife can be a bit fussy. My solution was to pit a chunky knot through the lanyard hole. My pinky instinctively grabs the leather between knot and handle and facilitates the draw. The know probably helps in retention with that 3.5 finger grip I tend to use.
The sweep of the scales make a nice thumb rest for some cuts and allow for a pinch grip with some slicing action. BRK put a nice convex edge on this one and I find it easy to maintain with a field expedient sharpener that I made.
For me, this is about as perfect as an EDC gets: easy to carry, easy to access, highly functional. Another win for BRK.


That is a sweet looking BRK.
-
Day 24

-
Day24
How about some work knives...boxcutters to be exact.
-
@glenfiddich1983 said:
Day 24Good to see Glen doing the due diligence.

-
DAY 24
Gerber Prodigy and its sidekick, the Leatherman Skeletool.
-
@Nix said:
Day 24 (Happy Battle of Bannockburn Day!):Today's carry is the delightful BRK 'Wayfarer'. What's not to love? 3.5" blade in CPM-154 and built to last (like all BRK knives). The handle is distinctly small, however the ergos on this knife are still really good. I typically use it with a 3.5 finger grip, but a 4 finger grip is possible.
The knife sits deeply in a great little leather sheath; however, drawing the knife can be a bit fussy. My solution was to pit a chunky knot through the lanyard hole. My pinky instinctively grabs the leather between knot and handle and facilitates the draw. The know probably helps in retention with that 3.5 finger grip I tend to use.
The sweep of the scales make a nice thumb rest for some cuts and allow for a pinch grip with some slicing action. BRK put a nice convex edge on this one and I find it easy to maintain with a field expedient sharpener that I made.
For me, this is about as perfect as an EDC gets: easy to carry, easy to access, highly functional. Another win for BRK.


Looks like a handy knife.

-
@comis said:
Nice pair! I have seen a few modern knives you posted, and from a traditional focused collector point of view, which modern knives are your favorite in terms of value and performance?
My favorite modern knives at the moment are Spydercos. There are a lot of good knife companies out there producing good knives but Spyderco have been my favorite since about 2008. I think the Spyderco Military is one of the best knives ever to come down the pike. While it doesnt get in many pics these days I still carry one a lot.. I have one clipped to the waist band of my short breeches at the moment. :D
-
Day 24
GEC 29 & 93
-
Awl these GEC 29's are killin' me.....
-
Day 24
A few Case Navy Knives.- Battleship Canoe
- Mini Trapper
- SodBuster Jr
-
Day 24. Victorinox Classic SD US Navy. Used it to fix a computer mouse. The Classic might be little, cheap, and well, probably the cheapest and easiest SAK to get, but it's quite capable. Of course, there is the Rambler and Pocket Toolchest.....

-
Day 20: A selection of Sodbusters
Today is my selection of Sodbusters. The top is a small "Jr" size from Aitor, with beautiful wood scales. I really enjoy this knife, and got it for a song on eBay. It came poorly sharpened - the grind wasn't even and it was something like 30 degrees on one side and 20 on the other. (what little there was). After a bunch of time on the Lansky, the knife is nice and sharp and holds an edge very well. It's a pleasure to use, having a nice strong backspring, good blade centering, and just a quality feel to it.
The next one is a Case Sodbuster, in the large 4.65" size. I got the red scales (although they're more red-orange in person) with the CV stonewashed blade. I carry this knife more than any other, and had my wallet pocket split by a tailor, just so I have a place to carry the knife. (the pocket also works well for smaller multitools like the Crunch). I love the smooth scales, the easy opening and closing, and the overall feel of the knife.
Finally, we have a cheapie Schrade large Sodbuster, IMP-22L. (The Jr. size is just IMP-22 without the "L"). This is... actually really good. The Case is far smoother to open and close, but the blade centering is good, there's no wobble or looseness in the pivot, the backspring is extremely strong, and it has a half-stop so it doesn't chop your fingers while closing it. The scales are plastic and satin finished instead of the case's glossy finish, with an "Imperial" metal logo inlaid. While opening and closing feels a little unrefined (the tang and backsprings could have used some smoothing and polishing), it's a very good knife and has taken a lot of abuse. I give these for christmas presents and I carry this if I ever think I might be in a situation where it might be confiscated or I might lose it. At $10 a pop (or $8 if you buy three at a time) they're the best deal on Amazon. The quality is just one step below Case, for a third the price.
Charles.

-
Classic slipjoints!

-
Nice classic cody.
Nice selection of Soddies Chopper.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

