MTO Unleashed!
-
DAY 26
This is a very special little Gerber that was given to me by Mike , lord of spammers way back at the first UK multitool meet-up. Despite its tiny size it sees plenty of use by me and easily slips into your pocket or wallet. MP600 for scale
FB1A3F23-82D2-49B5-A859-6349B0FC13BE by Duncan Moore, on Flickr -
This is a very special little Gerber that was given to me by Mike , lord of spammers way back at the first UK multitool meet-up. Despite its tiny size it sees plenty of use by me and easily slips into your pocket or wallet. MP600 for scale
FB1A3F23-82D2-49B5-A859-6349B0FC13BE by Duncan Moore, on FlickrNice knife and nicer story!

-
@Noa Isumi said:
Day 26
Since I commented in a disclaimer on an old business card being in yesterday's photo I figure today I'll show off two blades I have that were made by the farrier/smith it belonged to.The 1st is a simple fold over tomahawk w/ an unwelded wrap eye. I've taken this on a number of hunting and hiking adventurous I replace the handle several times. The current handle is a piece of 1x2 red oak I just rough shaped and knocked the corners off.
The knife is an extra for a set of throwing knives he made for a competitive knife thrower that then wound up in a fundraiser raffle. This thing is massive and weighs 1 pound 4 oz. The sheath is actually the first non-cardboard sheath I ever made, as you can see by the extra holes it was originally supposed to have more rivets that does. This knife to throws beautifully and sticks deep.
That is a Leatherman ST300 sitting next to it for scale
Some of the heavy duty knife from cold steel throws surprisingly well, I remembered seeing a lot of one pounders in the knife throwing range, and they are near indestructible.
@pfrsantos said:
**Day 26: **A small "tactical" Elite force. These are made by Umarex/Walther, the handgun company. Not the best quality, but not very expensive, either. They're not my favourite brand, but this model is quite nice. Great ergonomics, perfect for office or small cutting tasks.pfrsantos, what's the measurement unit on the mat? 1 square to 1 cm?
@sak60 said:
Really great knives everyone
Day 26.
Wenger Soldiers’71,’78,’94.Nice collection of the soldiers, and the catalog behind is definitely eye catching!
@Ron Who said:
Day 26Moki
Moki year knives 2005 and 2006, with inlays of hardwood and azurite/malachite.
If there is a chance I would visit Japan, I would most definitely love to visit Seki city, where Moki is made.
This is a very special little Gerber that was given to me by Mike , lord of spammers way back at the first UK multitool meet-up. Despite its tiny size it sees plenty of use by me and easily slips into your pocket or wallet. MP600 for scale
FB1A3F23-82D2-49B5-A859-6349B0FC13BE by Duncan Moore, on FlickrGerber LST, right? Looks nice! Perfect kit knife.
-
Powernoodle Day 26

Buck Bantam 285.

From the Powernoodle Archives. -
Thanks Comis

-
Good stuff to start the weekend with!

-
Nice folders pfr, Dunc, Ron, PN.

-
Andrew, do you want me to loan you some badges until you get more?
-
DAY 26
1 Columbia knife and 1 MARTINEZ ALBAINOX rescue knife



-
Day 26
Camillus 66 and new to me Challenge Cutlery Co. Bare head Jack. This knife I believe is now my oldest being close to a 100 years old or more.

bonus pics




-
@ChopperCharles said:
Day 21: A Micro-sized Scissor ToolsI did a group of tools yesterday, so why not another today.
I don't currently use any of these scissor tools regularly. I use the Paul Chen all the time, but these are drawer queens for the most part. One of them may end up on a set of my keys, maybe. From upper left in a clockwise manner, we have a modified Schrade Tough Chip, a cheapie Craftsman, a Sog Crosscut 2.0, and in the center a Leatherman Micra:
And since I wasn't paying much attention when I took the pics, they're in a different order when opened up in scissor mode.
Surprisingly, the cheapie $10 craftsman tool has the best scissors of the bunch. They go through paracord easily, they're thick and beefy and exceptional at everything I've tried cutting. Second place goes to the SOG Cross-cut. The extra leverage is nice, and the curved cutouts on the handles and tools make it more comfortable to hold. They don't quite cut paracord, but they do a good job at everything else. I will say the gears do catch up on things and make it a little difficult to go through thicker material, but the scissors themselves cut through thick stuff with ease thanks to the compound leverage. The Leatherman is third. The scissors are still quite good, but are even worse at paracord than the SOG, and they're smaller to boot. Finally, the Tough Chip. Stock, this is the worst of the bunch. The scissors don't cut anything well except paper. Anything thicker gets bent instead of cut, and the scissors themselves are very soft and easily damaged by staples or even by themselves if you twist it the wrong way during a cut. However, I've drilled out the rivet, removed the spring washer, and filed down the pivot, and replaced the rivet with a screw so I can adjust the pivot looseness. In this manner they cut slightly better than the leatherman, but the soft steel is still a problem. So still last place.
Here's a comparison of the blades.
The Craftsman blade is the longest, and it's the only one that's ground on both edges. However, I prefer the SOG CrossCut's blade the best. It's much deeper and has that nice indentation on the spine for my thumb. The Schrade is my second choice, because it's the only one with a blade without a handle underneath it. So it could potentially be used for cutting food in a pinch. It's also the only one of these four that locks in place. In fact, three out of four fold-out tools on the Schrade lock.
Speaking of tools, they all have a similar selection:
As said, all the fold-out tools on the Scrade lock except for the bottle opener/micro driver. The phillips driver, flat driver, and blade lock, but not the bottle opener/eyeglass driver. There is a very good diamond file (best of the bunch), a decent set of tweezers, and a beefy toothpick that are removable. Only this Schrade and the Leatherman had micro-drivers that fit eyeglass screws without modification.
The CrossCut also has a toothpick and tweezers, but they're attached to the tool. You also get a flat driver, bottle opener with too-thick eyeglass driver, and a worthless hunk of smooth metal they call a file. No phillips driver here. I like these tweezers a lot better than the Leatherman tweezers, as they're bigger and require less force to close.
The Leatherman here has the third-best file, flat driver, tweezers, bottle opener, and a usable eyeglass driver. The phillips driver is 2D and there... it's not the best at screws, but it's usable in a pinch. The 2D driver on the Tough Chip is a lot better, actually.
Finally the Craftsman. This is the only tool of the bunch that has a SAK-style backspring for each tool. Most, but not all tools, open with a nice snap. It comes with the second best file, it has a single cut on one side and crosscut on the other, and is quite aggressive. It's the only one here with a 3D phillips (albeit a small one) and a CAN OPENER (which also doubles as a bottle opener). It has a small punch/awl, a micro driver, and a flat driver as well. None of these tools have an edge. They're all super-polished by the factory, and I had to take a file to sharpen the flat driver, the eyeglass driver, the can opener, and the teeny little awl. Once sharpened, the can opener actually does a passable job of opening a can. It's small so it takes a while, but it works. The punch tool is too small and short to be of any use to be honest, but the phillips driver does a decent job. All these tools snap open nicely on the backspring except the eyeglass driver. My copy has a mm or so of play in it. I think I got a bad one, as another one on the wall at Ace didn't have that problem. I will say, the longer tools have far more SNAP to their backsprings, and even snap closed. The small tools will snap open but not closed.
So which one is going on my keys?
Well, common sense says the modified (sharpened) Craftsman should. It has the best scissors, a perfectly usable 3D phillips driver, the longest blade, the 2nd-best nail file, and a freaking can opener. It's the obvious choice...... but.... it's so.... BIG. It's huge, actually. Those backsprings take up a lot of real estate, and make it heavy to boot. It's not good on a set of keys. Same deal with the Scrade, it's too large to effectively fit on a keyring for me. It ends up being a choice between the Leatherman and the SOG. While the SOG misses out on having a phillips driver and usable nail file, the toothpick is a wonderful tool to have, and the blade is much better to use than any of the others on these mini multitools. And since it's replacing a Victorinox SD, I'm essentially just trading better scissors for a crappier file.
Charles.
Excellent comparison Charles, thanks

The thing with the scissors is a bit complicated often and results vary even on the same model.
It's often about how lose our tight the pivot is being assembled.
I've seen a tendency of lose pivots on Leatheemans over the last year's.
My Micra snips paracird just fine.... now. -
This is a very special little Gerber that was given to me by Mike , lord of spammers way back at the first UK multitool meet-up. Despite its tiny size it sees plenty of use by me and easily slips into your pocket or wallet. MP600 for scale
FB1A3F23-82D2-49B5-A859-6349B0FC13BE by Duncan Moore, on FlickrI have that little guy too! LST? It's super lightweight and I've stuck it my wallet once when I realized i had it on me at a hockey game, and didn't want to walk all the way back to the car. Great knife, super sharp, and extremely lightweight. Kept misplacing it so now it has a bright colored lanyard on it so it's easier to see :)
Charles.
-
Day 26

-
@Rizio Il Ghiro said:
Great blades of varying sizing and even better stories, everyone!
**
Day 26**After finding out about the Victorinox Yeoman on this forum, and seeing various examples here, I thought I’d try and find one..... Should have known better,...
I suspect rocking horse manure and hen’s teeth are easier to lay your hands on!
So, I set to and made my own - most of the functions of one of my favourites, the Explorer, but one layer fewer, what’s not to like? Today it will be accompanying me on an exciting day at the desk, and then hopefully cracking open a few bottles later! 
That's how you do it

-
-
@powernoodle said:
Powernoodle Day 26
Buck Bantam 285.

From the Powernoodle Archives.Niiiice

-
Gec tae Fuzz!... Day 26
My brand spanking new GEC Pemberton bought specifically for Dean's Memorial Callenge in just a few days time. It's cute, it's so teeny-weeny!



-
@Fuzzbucket said:
Gec tae Fuzz!... Day 26My brand spanking new GEC Pemberton bought specifically for Dean's Memorial Callenge in just a few days time. It's cute, it's so teeny-weeny!



Very nice cuz !

-
@Fuzzbucket said:
Gec tae Fuzz!... Day 26My brand spanking new GEC Pemberton bought specifically for Dean's Memorial Callenge in just a few days time. It's cute, it's so teeny-weeny!



That's gorgeous Fuzz

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
