MTO Unleashed!
-
This one may have a few of you stumped as to what it is.
5DE9C428-5927-49BF-BEC5-A0CFA31E5B53 by Duncan Moore, on Flickr
04F5B987-CCE6-4616-9461-1846BBA8F3E8 by Duncan Moore, on FlickrUh...oh... a flying suit survival knife

RAF Mk.III flying suit survival knife
Stores reference 22c/1278106. Almost certainly manufactured by Joseph Rodgers of Sheffield. Approximately 21cm in length. Standard aircrew issue until replaced by the unpopular 'J' cutter tool. Flat profile gravity knife with a composite handle containing a spring lock mechanism activated by two levers on either side of the hilt. This mechanism locks onto a stud on the sheath and so retains the knife. The blade is of stainless steel, curved, and measures approximately 10cm. The knife was worn in a metal scabbard /sheath, stores reference 22c/4466607/13 attached to a cloth patch, stitched upside-down on the flying coverall leg. This enabled the knife to drop out on a lanyard should the wearer need to cut rigging lines of a parachute canopy in an emergency situation. These knives were also used by the SAS. We have three availalble complete with scabbard in mint unissued condition. Each is marked with reference numbers, war department broad arrow and '98 date. You will not find better. Last few... Stock code S24382/3/4.
(www.historicflyingclothing.com)
-
Cool!

-
@pfrsantos said:
**Day 27: **Another Elite Force. This is a more usual design for them. Tacticallish looking, stone washed blade and handle. Never used it. The opening is impossible with the thumb studs alone and the flipper only opens the blade while you push on it. It needs a combination of flipper plus thumb stud to open. Lock is pretty solid, maybe it's a good unexpensive folder fo EDC but couldn't really say...Slight pity it didn't work as intended, I agree with Nix it got cool lines!
This one may have a few of you stumped as to what it is.
5DE9C428-5927-49BF-BEC5-A0CFA31E5B53 by Duncan Moore, on Flickr
04F5B987-CCE6-4616-9461-1846BBA8F3E8 by Duncan Moore, on FlickrNo doubt!

-
Day 27
The little Leathermans.
I have no complains about the chisel grind blade on them...

-
Well, what with the covid and isolation and what not, I've gone a bit feral myself.....
-
This one may have a few of you stumped as to what it is.
5DE9C428-5927-49BF-BEC5-A0CFA31E5B53 by Duncan Moore, on Flickr
04F5B987-CCE6-4616-9461-1846BBA8F3E8 by Duncan Moore, on FlickrIs that a British Arrow on the blade?
-
@Fuzzbucket said:
I am rather hairy at the moment...fuzzy.
-
**Day 27: **some SAKs with uncommon tools:
The green one is the Vic Trooper that I already used in this challenge, but I had to include it as uncommon/unusual tools.
The bottom one is a Wenger Golf Pro with special tools for the golfer.
The red nylon Vic is a Watchmaker with the special tool for prying off the back of a watch..jpeg)
-
Day 28
The humble Gerber paraframe. Fits my small carney hands like a champ, easy to clean with the open construction. I particularly like the clip point shape of this blade. Sharpens up nicely, and if you lose it , you've not out 300 odd quid, which is handy if you're getting round many job site like I do . Comes in various sizes also, so every one can have a go at it . Clip also works well and hasn't loosened after 6 years plus .
-
@Fuzzbucket said:
Is that a British Arrow on the blade?It’s not necessarily British army but it is British

Some have already guessed and well done
it is a RAF Aircrew survival knife. It would have come with green canvas sheath that was sewn onto the flight gear and the knife and metal scabbard would have fitted in upside down. To draw the knife you pinched the 2 protruding silver coloured levers to release it -
Day 27

-
@powernoodle said:
Powernoodle Day 27
*
Kershaw Leek in blackwash with D2 and 14C28N laminate. Good times.* -
-
Day 27
Camillus 50 & 70
-
Day 27
The Handyman is a few tools short of a Champ :D
I would have liked an inline Phillips,that would be perfect,to me.

-
Day 27 Tramontina and Ibberson

Nice water sport knives
@McStitchy said:
Day 27The little Leathermans.
I have no complains about the chisel grind blade on them...Nice grouping their. I have a couple of the Style PS that I like when traveling and going into areas where knives aren’t allowed.
@smiller43147 said:
**Day 27: **some SAKs with uncommon tools:
The green one is the Vic Trooper that I already used in this challenge, but I had to include it as uncommon/unusual tools.
The bottom one is a Wenger Golf Pro with special tools for the golfer.
The red nylon Vic is a Watchmaker with the special tool for prying off the back of a watch.Interesting selection of tools.
@Storm said:
Day 28
The humble Gerber paraframe. Fits my small carney hands like a champ, easy to clean with the open construction. I particularly like the clip point shape of this blade. Sharpens up nicely, and if you lose it , you've not out 300 odd quid, which is handy if you're getting round many job site like I do . Comes in various sizes also, so every one can have a go at it . Clip also works well and hasn't loosened after 6 years plus .Nice Gerber. Clip point blades are nice.
@glenfiddich1983 said:
Day 27
I know I’m suppose to be looking at the SAK, but I can’t help but notice the beer. Am I reading correctly that Amstel has a non-alcoholic radler?
Camillus 50 & 70
Nice pair of Camis
@Humayd A R Mahomedy said:
Day 27
The Handyman is a few tools short of a Champ :D
I would have liked an inline Phillips,that would be perfect,to me.Nice SAK. I never tried a Handyman, but fully agree on appreciation for inline phillips.
-
@CraftsmanSAK said:
DAY 27
Gerber Freeman Guide. This is one bargain knife that is so comfy in the hand, I really wish they would make another with a bit thicker spine of better grade and G10 or Micarta scales. (A leather sheath on that would be really cool as well). So far I've only used this to cut food when camping. If I ever do make my own one day, I'm using this as a template.I can see where the improvements you mention could make that one really nice knife, especially with the nice looking blade and comfortable handle
@Fuzzbucket said:
Return of the Fuzzaxe Day 27It's been a lovely warm brooding atmospheric day here, but threatening rain (and indeed thunder and lightning) at any moment. So, took the opportunity to make and furnish Fuzzaxe with a new short Ash handle. I'd attempted one a while back with some Hazel, but halfway through realised it wasn't nearly seasoned enough so gave up. This time I used a length of well seasoned Ash with a beautiful uniform grain... Just need to oil it now.
Nice axe. The head looks like it has seen some definite use.
@pfrsantos said:
**Day 27: **Another Elite Force. This is a more usual design for them. Tacticallish looking, stone washed blade and handle. Never used it. The opening is impossible with the thumb studs alone and the flipper only opens the blade while you push on it. It needs a combination of flipper plus thumb stud to open. Lock is pretty solid, maybe it's a good unexpensive folder fo EDC but couldn't really say...It is a nice looking knife, so shame that it doesn’t really work at opening the way you’d expect.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

