MTO Unleashed!
-
-
Two more, both paperback, depending on your interest.



-
I’ve got the Fairbairn Sykes book by Ron Flook , they aren’t cheap are they
-
@Dunc said:
I’ve got the Fairbairn Sykes book by Ron Flook , they aren’t cheap are theyNo they aren’t especially if they have to be got 2nd hand because of being out of print.
These aren’t too bad compared to the last book I bought for the US &Allied Military knives reference.
600+ pages colour photos.
-
DAY 28
Continuing the military theme from yesterday here is another of my Fairbairn Sykes British Commando daggers.You May remember earlier in the month I posted a photo of my Wilkinson Sword dagger , well this one isn’t a Wilkinson made one and it could be any one of a few makers as they stopped putting manufacturers names and marks on them as they didn’t want this info going to the enemy if they were captured.
This example has a machine ground blade and the No. 2 on the handle which proves it was WW2 manufactured. It also has the Broad Arrow and No. 13 on the handle near the guard. This is a nice knife and there’s plenty of these around but this ones a bit more special :DOn the handle near the pommel is engraved FR693. This is a Admiralty mark that was added post WW2 and re-issued most likely to the Royal Marines or Special Boat Service. The sheath is correctly stamped FR271.
What makes this even more special is that this knife and several similar to it was purchased from the widow of a retired SAS Lt. Colonel and was at some point stored at their base Sterling lines.
D1C2B5A0-2F63-469C-BD7C-85E07FF14C80 by Duncan Moore, on Flickr
EE42CBF3-0F7B-49FA-971C-6F229AFB07EF by Duncan Moore, on Flickr
AAB62C27-3917-40D0-BC0A-300A3923C926 by Duncan Moore, on Flickr -
Day 28 (ice cream sunday)


Leatherman Wave, I was gifted a PST when I was much younger and used it for many years before discovering the newer model Wave. Later on Charge was released, and I resisted the upgrade for many years, since I love the slim and elegant aesthetic of Wave. -
Continuing the military theme from yesterday here is another of my Fairbairn Sykes British Commando daggers.You May remember earlier in the month I posted a photo of my Wilkinson Sword dagger , well this one isn’t a Wilkinson made one and it could be any one of a few makers as they stopped putting manufacturers names and marks on them as they didn’t want this info going to the enemy if they were captured.
This example has a machine ground blade and the No. 2 on the handle which proves it was WW2 manufactured. It also has the Broad Arrow and No. 13 on the handle near the guard. This is a nice knife and there’s plenty of these around but this ones a bit more special :DOn the handle near the pommel is engraved FR693. This is a Admiralty mark that was added post WW2 and re-issued most likely to the Royal Marines or Special Boat Service. The sheath is correctly stamped FR271.
What makes this even more special is that this knife and several similar to it was purchased from the widow of a retired SAS Lt. Colonel and was at some point stored at their base Sterling lines.Really nice piece of history
@comis said:
Day 28 (ice cream sunday)

Leatherman Wave, I was gifted a PST when I was much younger and used it for many years before discovering the newer model Wave. Later on Charge was released, and I resisted the upgrade for many years, since I love the slim and elegant aesthetic of Wave.I think the OG Wave was one of Leatherman’s best multitools
-
Seeing that you mentioned the ZT0562Ti, here is mine. This is at the larger limit of folders for me but it is a nice knife. Solid and overbuilt like ZTs are known to be, with nice flipping action and good in the hand.
Everytime I see this one from you, I have such impulse to rush over and get one myself. Still waiting on the right color/theme to emerge, and I am sure I will be getting one no doubt.
@cody6268 said:
Day 27. Benchmade 556 Mini Griptillian, 154CM PE drop point blade, Grivory handles. Pretty much the regular base model Mini Grip until last year? I think it was when they made a change to S30V as their choice base model steel. This was purchased from a member here close to a year ago for $50. He'd polished the copper bronze washers, and that, coupled with the AXIS Lock, is a knife that is very smooth to use with either hand. Being left-handed, it is one of my few that is set up for left-hand carry, with the other being the Byrd I posted earlier.154CM is definitely not S30V, but in my use, I've only had to strop it a few times, and run it over the ceramic once.

@Sos24 said:
I think the mini-grip is a popular edc in large part to its basic no frills utility.
Continuing the military theme from yesterday here is another of my Fairbairn Sykes British Commando daggers.You May remember earlier in the month I posted a photo of my Wilkinson Sword dagger , well this one isn’t a Wilkinson made one and it could be any one of a few makers as they stopped putting manufacturers names and marks on them as they didn’t want this info going to the enemy if they were captured.
This example has a machine ground blade and the No. 2 on the handle which proves it was WW2 manufactured. It also has the Broad Arrow and No. 13 on the handle near the guard. This is a nice knife and there’s plenty of these around but this ones a bit more special :DOn the handle near the pommel is engraved FR693. This is a Admiralty mark that was added post WW2 and re-issued most likely to the Royal Marines or Special Boat Service. The sheath is correctly stamped FR271.
What makes this even more special is that this knife and several similar to it was purchased from the widow of a retired SAS Lt. Colonel and was at some point stored at their base Sterling lines.
D1C2B5A0-2F63-469C-BD7C-85E07FF14C80 by Duncan Moore, on Flickr
EE42CBF3-0F7B-49FA-971C-6F229AFB07EF by Duncan Moore, on Flickr
AAB62C27-3917-40D0-BC0A-300A3923C926 by Duncan Moore, on FlickrSure sounds like a very unique knife from its background, I am curious what is the internal construction inside the handle for this one? Is it a slim tail thru tang?
-
@comis said:
Everytime I see this one from you, I have such impulse to rush over and get one myself. Still waiting on the right color/theme to emerge, and I am sure I will be getting one no doubt.
Sure sounds like a very unique knife from its background, I am curious what is the internal construction inside the handle for this one? Is it a slim tail thru tang?.
Yes it goes all the way through and then the Pommel nut is screwed on and the peened over.
-
Continuing the military theme from yesterday here is another of my Fairbairn Sykes British Commando daggers.You May remember earlier in the month I posted a photo of my Wilkinson Sword dagger , well this one isn’t a Wilkinson made one and it could be any one of a few makers as they stopped putting manufacturers names and marks on them as they didn’t want this info going to the enemy if they were captured.
This example has a machine ground blade and the No. 2 on the handle which proves it was WW2 manufactured. It also has the Broad Arrow and No. 13 on the handle near the guard. This is a nice knife and there’s plenty of these around but this ones a bit more special :DOn the handle near the pommel is engraved FR693. This is a Admiralty mark that was added post WW2 and re-issued most likely to the Royal Marines or Special Boat Service. The sheath is correctly stamped FR271.
What makes this even more special is that this knife and several similar to it was purchased from the widow of a retired SAS Lt. Colonel and was at some point stored at their base Sterling lines.
D1C2B5A0-2F63-469C-BD7C-85E07FF14C80 by Duncan Moore, on Flickr
EE42CBF3-0F7B-49FA-971C-6F229AFB07EF by Duncan Moore, on Flickr
AAB62C27-3917-40D0-BC0A-300A3923C926 by Duncan Moore, on FlickrBloody marvellous that. Have a

-
Thank you Mr. Bucket

-
Nice one Dunc.

Haven’t seen the double vice marks on the pommel nut before.
-
Day 28
Today is a Lifu Multitool. Ot is the most extensive tool, but made decently enough. One of the things I really liked about this tool was the 1/4 bit adapter and how the case held a few bits. It rode in my bicycle jersey pocket are wedge pouch on several extend bike rides.This tool also has a story behind it. One of my additional duties (in reality a great boondoggle) for about a year in the Navy was a contingency task force for shuttle launches. I was in Florida for STS-133 and because it was delayed, I had to some spare time and rented a bicycle to go riding. It was at the bicycle shop that I purchased the Lifu. What did stink was because of the long delays, when it actually launched, I was on another operation so my alternate got to go.
-
@sak60 said:
Nice one Dunc.
Haven’t seen the double vice marks on the pommel nut before.
They do tend to pop up from time to time , it can either mean the knife has been dismantled or the person building the knife re-inserted it to make adjustments. Mine is the latter as all marks are the same and uniform and the pommel is peened correctly
-
DAY 28
2 specials from my collection



-
Fascinating blades and stories, everyone!
Day 28
After many years of not seeing the appeal of the Pioneer, I am now a confirmed aloxoholic! No soldiers here, just Pioneers, the standard, a poor man’s black beauty, a lovely grass green from Berlin, the year knives and the Nespresso knives (though given that they lack the lanyard/key ring attachment, are they still Pioneers, or are they civilian soldiers!!??) - it’s the colours that attract me most to the alox series, and that o-so-useful awl - it just doesn’t get smeared in adhesive when opening packages like the blade does.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



