MTO Unleashed!
-
That's bloody lovely!

-
Actually, sod it, it's more than just bloody lovely, it's exquisite.

-
Two GEC Northfields , #78 American Jack and #66 Calf Roper Stockman

Great GEC's!

A cold a rainy day today, so not much knife action for me. Thought I'd finish the challenge with a few Buck knives. Today's carry is the wonderful Squire lock back. I posted my older Squire earlier in the challenge, here's a shot the one I carried today, my newest:

Sweet!

-
-
A cold a rainy day today, so not much knife action for me. Thought I'd finish the challenge with a few Buck knives. Today's carry is the wonderful Squire lock back. I posted my older Squire earlier in the challenge, here's a shot the one I carried today, my newest:

Clearly let's you forget about the dull weather outside?

-
Yup!
-
@Fuzzbucket said:
Actually, sod it, it's more than just bloody lovely, it's exquisite.
Thanks, Fuzz. It's a little gem in my eyes.

-
@glenfiddich1983 said:
Day 29
Great pic
Never heard of “fizzy” pez.@CraftsmanSAK said:
DAY 29
A couple of Ontario Knife Co. RAT Model 1's. Coyote Tan in D2 Steel and an Olive Drab in AUS-8. Very comfortable folders. The way the spine is just a bit higher than the handle, coupled with comfortable jimping on the spine, and the shape of the liners/scales are just perfect.I don’t own one but hear a lot of good things about Ontario RATs
@Borg said:
That's pretty neat
Day 29 Kansbol and Wenger

Another nice Mora

A cold a rainy day today, so not much knife action for me. Thought I'd finish the challenge with a few Buck knives. Today's carry is the wonderful Squire lock back. I posted my older Squire earlier in the challenge, here's a shot the one I carried today, my newest:

That is a beauty
-
@glenfiddich1983 said:
Day 29

-
Today’s work carry is the humble Gerber Moment folder
80C5DD66-DCB4-4531-BC06-AB89B2424E6E by Duncan Moore, on FlickrGreat carry.

-
Day 30.
Been an awesome month. Thanks Comis and everyone
there’s been a lot of interesting blades shown and info learned.
I’m finishing with a few classics.

-
Which is pretty unusual for what was pretty much an inexpensive giveaway knife for a pump manufacturer. EKA made lots of them, and they are what I like most from them. There are Swedish tourist knives, Volvo knives, these Flygt knives, and others that use this same pattern. The "Swede" is a pretty mediocre knife, especially in plastic. I bought two new, both had cracked handles. I'm thinking about rehandling them, but the knife is built in a really weird fashion (it doesn't even have full liners).
-
Day 29: Camilus USA BSA883 Cub Scout Knife. This is the stainless steel, "economy" model from the late 1990s. I have had three Cub Scout knvies. For me, they are great for EDC, in that they are compact, fairly lightweight; and the awl and screwdriver both lock. Main blade has a half stop. The first was a very early Imperial Cub Scout, which I fixed up and gave to a friend of mine who is a Scout leader. Second is a carbon steel Camillus, which I still use. I bought this one for less than ten bucks. Blade was sharpened extremely well, and I've just stropped it once. Camillus steel is quite good. The 883 is slimmer, lighter, and stronger due to the way the handles are set up.
Along with a rather uncommon, and very old Hot Wheel; the Top Fuel Dragster from 1970.

-

@cody6268 said:
Day 29: Camilus USA BSA883 Cub Scout Knife. This is the stainless steel, "economy" model from the late 1990s. I have had three Cub Scout knvies. For me, they are great for EDC, in that they are compact, fairly lightweight; and the awl and screwdriver both lock. Main blade has a half stop. The first was a very early Imperial Cub Scout, which I fixed up and gave to a friend of mine who is a Scout leader. Second is a carbon steel Camillus, which I still use. I bought this one for less than ten bucks. Blade was sharpened extremely well, and I've just stropped it once. Camillus steel is quite good. The 883 is slimmer, lighter, and stronger due to the way the handles are set up.Along with a rather uncommon, and very old Hot Wheel; the Top Fuel Dragster from 1970.


Locking tools are a big plus. -
Day29
Some Bucks
I only own a handful of Bucks but here they are...728 Whitetail
This 3in hunter is a simple drop point with wood handles. These were sold as a Christmas gift set in 2004 w/ an embossed leather wrapped box (no I dont have this one's, yes I have another set nib)
This knife has been used in the field a few times and currently rides on the gunbelt for my 22s wedged inbetween old Mosin-Negant cartridge pouches.620 Reaper
This was a clearance buy and while I have ocasionaly carried it I have never actualy used it (why it looks new after 3 years)Jumping to the folder
759 Wittaker Metro
The 759 was originally etched with the Wittaker branding though that was dropped and it is now simply called the Metro. This was my wife's who thought it was cute, then never carried in favor of her Vic Spartan LightAnd lastly
639> Fieldmate
This is a 90s Fieldmate with the > instead of the inverted T stamped on the mid2000s re-release. I found this one around '99-2k and jumped on it after having missed a screaming deal on a 184 in a 2nd hand shop that didnt know what it was...the one that got away.
This is basicly a short version of the 185 Buckmaster LT (super rare, even more than regular 184 Buckmaster)
I have carried this camping a few times and found it to be a great knife.
Also as I recall from compairing both at a shop the serrations on the re-release are ground on the opposite side of the blade from the origonals.
-
Day 25: Sheffield 12012 (Buck 355 Copy)
I bought this tool new in the blisterpack a few years ago. Thought it was neat, and was initially unaware it was a copy of a buck tool. I threw it in the glovebox of my pickup and haven't touched it since.
Well, I figured I'd fix that, so today I brought it out and used it to do more electrical around the garage. But to start with, this is the tool:
It's very basic, but you know what? The tools are all well formed, and not a one of them is over-polished. There's no rounding of edges to speak of. The two phillips drivers are 2.75D. They're flat on one side, but have three fully formed blades. It's an odd choice, a #1 and one that's halfway between a #2 and a #3. They do fit nicely into their intended screws. There are four flat drivers (if you count the end of the file) and they are also nicely formed. The bottle opener opens bottles well, the can opener opens cans relatively quickly. The blade came extremely dull, but it sharpened easily. The tools clump and don't lock, and the reach is limited for most of the drivers, but they're all really solid, well-made tools.
Here's an action shot, unscrewing a faceplate.
It comes with a nice pouch. The etching of the "Sheffield" logo isn't terribly good on the side.
continued...



-
..continued
Now onto use. Upon initial use, I liked how smooth the handles are in pliers mode. It felt good in my hands, and the only hot spots are at the very end of the pliers, where the flat piece of metal that engages the tools has sharp edges. Overall, it felt much like a Schrade Tough Tool or a Coleman Pro Lock to handle. Smooth, comfortable, and nice.
But... the more I used it, the more annoying little quirks I found. For instance, when opening the pliers, they often get stuck like this:
Often when closing as well. You have to be careful to keep the handles parallel while opening and closing, and it's not second nature. The tool was constantly getting hung up and annoying me.
Next... when using a driver with force, the tool twists. This means you don't have nearly as much leverage as with a tool that opens normally.
It did manage some heavier duty tasks, like pulling these staples out, cutting romex (with lovely anvil cutters), yanking wires out from under the flooring placed on top of the rafters (really who does that?!?). They did everything I asked, but I had to rotate the tool to get the best purchase. For instance, when prying up those staples, I initially tried prying up with the tool sideways, gripping the staple right near where it goes into the wood. That was no good, as one of the handles simply bent as I pried, and I couldn't keep pressure on the jaws anymore. So I had to reposition the pliers as shown, to be able to put force on them. Not ideal at all.
The tool mostly excelled at manipulation of wires without needing any force. Once I got the new wires in the electrical box, I used the pliers to trim them shorter, bend hooks in the wires to screw onto outlets and switches, twist ground wires together, and the like. For that the pliers were comfortable and easy to use. But anything heavier than that and they felt pretty awkward at times.
Still, the fact is this multitool did everything I asked of it. Yes, the tool clumping was annoying. So was having to open the handles to get the tools out. To be honest I felt like the tool was getting in my way just as much as it was helping. It will not be an EDC for me ever, and I think I'll probably never use it again, but I wanted to get it in this shootout and really USE it for once. And I feel good having done that. It was a fun experiment, and I enjoyed it... but next time I go back to the garage, it will be with the SOG PowerPlay.
Charles.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

