30 Day Off-Brand Challenge
-
I'm not saying we could drive bits as it is, but looking at it, it reminded me of the CenterDrive. Roxon could experiment with a long bit driver. They're halfway there already.
-
@ReamerPunch said:
Day 27

Nice, made some ranger bands myself the other day

Sent fra min FRD-L09 via Tapatalk
-
@ReamerPunch said:
I'm not saying we could drive bits as it is, but looking at it, it reminded me of the CenterDrive. Roxon could experiment with a long bit driver. They're halfway there already.

-
Day 28


-
Day 29

I prepared a jug for the bottle cutting jig.

It is fantastically strong, as it is thicker than the pepsi bottles. You do not need this to be 5mm wide. Even at 2mm it is stronger than 5mm pepsi ribbon.
Sadly it did not get cut in a single, long ribbon, like the pepsi and mountain dew bottles do. I might be able to do it if I am very careful when feeding the bottle to the jig. It is worth the extra time, since this is very strong. I'll cut a new, 2mm notch, and give it another go, slower.
The jugs are also larger than the 2lt pepsi bottle, and with 2mm ribbon, you could get an incredibly long, durable ribbon.

-
Nice home made jig! What kind of lashing do you use the plastic for?
-
Thanks!

I use it for the odd job around the house, like keeping balcony doors open, clothesline, lanyards. I even tied an awning bar in place.
The funnest thing was pulling up groceries from the balcony. With gloves.
I mainly made the cutting jig just to see if it would work, and because I had a lot of bottles around. And it works. Sure, I have enough paracord and bricklayer's line and many things in between, but why waste those, when you can use waste itself? -
-
Day 30

I also made a funner out of the juice jug. I removed the foam part with the corkscrew, trimmed the edges with the scissors, and tried to poke the cap into a cone.

And since the cap was leaking from the sides, I cut the foam piece and put it back in. Back to watertight. Except for the hole.

-

And there you have it. Not only did the Roxon Storm survive, it passed with flying colors. Everything on it works, and some tools are pretty amazing. The scissors always steal the show, and they got a ton of use. A tiny bit of hassle to open one handle to then get the scissors, compared to the Outu or Flagship tools, but still ok.
The Phillips is another great tool on this. Robust, locking, and it takes the bit kit. Awesome. A little short, but with the bit kit adapter, still excellent.
I also like the little blade. The tanto shape has grown on me even further.
Can opener, bottle opener, cord cutter, everything works. They even put a nice file in there. And I used everything, except the ruler and straight edge, and the flathead on the file. Even the corkscrew and glass breaker got some use. Pretty good.I liked it already, before all the updates, but now I like it even more. I got used to the weight and stopped thinking "oh this is heavy" every time I picked it up. Sure, it is a little heavy, tool and bit kit in the sheath, but I am ok with it.
Sure, the ergonomics are not superb, but I never felt too much discomfort. And build quality is rather high. Everything is still nice and tight, tools pivot smoothly and snap in place like the day I bought it. Nothing developed play, nothing deformed. Still going strong.In conclusion, I would recommend this. The tool set covers many bases, it is made well, and it looks good.

Thanks for coming along for the ride, everyone! I've had so much fun using this for a month.

-

That's great!
-
@ReamerPunch said:

And there you have it. Not only did the Roxon Storm survive, it passed with flying colors. Everything on it works, and some tools are pretty amazing. The scissors always steal the show, and they got a ton of use. A tiny bit of hassle to open one handle to then get the scissors, compared to the Outu or Flagship tools, but still ok.
The Phillips is another great tool on this. Robust, locking, and it takes the bit kit. Awesome. A little short, but with the bit kit adapter, still excellent.
I also like the little blade. The tanto shape has grown on me even further.
Can opener, bottle opener, cord cutter, everything works. They even put a nice file in there. And I used everything, except the ruler and straight edge, and the flathead on the file. Even the corkscrew and glass breaker got some use. Pretty good.I liked it already, before all the updates, but now I like it even more. I got used to the weight and stopped thinking "oh this is heavy" every time I picked it up. Sure, it is a little heavy, tool and bit kit in the sheath, but I am ok with it.
Sure, the ergonomics are not superb, but I never felt too much discomfort. And build quality is rather high. Everything is still nice and tight, tools pivot smoothly and snap in place like the day I bought it. Nothing developed play, nothing deformed. Still going strong.In conclusion, I would recommend this. The tool set covers many bases, it is made well, and it looks good.

Thanks for coming along for the ride, everyone! I've had so much fun using this for a month.

Congrats on completing it! I'm not sure I could do 30 days of the same tool personally but you did admirably and sold me on the build quality and useability of a tool and brand I'd never even heard of before this thread!
There's however two questions burning in the forum's mind:
-
What will be the first thing you carry as a free man?
-
How drunk do you need to get to commit to a Nextool Mini Flagship 30 day challenge, regardless how many pieces the tool breaks into :ahhh
-
-
@GearedForwards said:
Congrats on completing it! I'm not sure I could do 30 days of the same tool personally but you did admirably and sold me on the build quality and useability of a tool and brand I'd never even heard of before this thread!There's however two questions burning in the forum's mind:
-
What will be the first thing you carry as a free man?
-
How drunk do you need to get to commit to a Nextool Mini Flagship 30 day challenge, regardless how many pieces the tool breaks into :ahhh
Thanks! I loved it!

I'll go back to the Deluxe Tinker and Rebar, with other stuff sprinkled in.
Well, my first broke, and the second's scissors are paper crimpers, so no joy there. I would not mind giving it a go if the tool was decent quality, since the design is actually nice.
I am thinking of trying to repair the first one. Some epoxy and a piece of wiper blade insert, and the scissors will cut again.
-
-
Great challenge! Congrats

Sent fra min FRD-L09 via Tapatalk
-
Thanks!

Also, yay! I got my shiny Off-Brand Badge!

-
Congrats on your shiny new badge, RP, and thank you for an interesting and comprehensive review on an unusual-brand-tool!

So, what's next for the ReamerPunch Testing Labs!?!?

-

Next would have been the NexTool Mini Flagship, but I am not sure I'll review it.
I'll review the Bibury 21 in 1 instead.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
