Outrider Bent
-
I removed the scales on my Forester - nothing to worry about, just pry it with something thin, a can opener might work. I even managed to put the old ones back pretty reliably
-
If it bent once, it will bend again, and if you keep bending it back you'll just fatigue the metal.
Mine has been bent for a decade, and has not affected function one iota. Just roll with it.
Now that it's already got a ding, you don't have to worry about babying it >:D
-
Thanks so much for the replies. I'm going to try popping off the scale on that side later today.
-
Open that tool and leave it open for a couple of days. Maybe it forces the liner back, or at least, correct it a bit.
Awlso...
Welcome to


-
Known problem with these liners. Mine had that happen when I dropped it on the kitchen's ceramic tile floor. The heaviest duty and biggest SAKs in the lineup get the flimsiest, thinnest liners they could find. How embarrassing. It's what cemented my choice in moving to Alox for users. The slide-locks seem to have thicker liners. I know my Alpineer's liners are twice as thick as my Outrider's. I think Vic's main concern with the 111mm liners is thickness and weight, not durability.
Oh, and welcome!
-
Yep. Drop 111mm on hard surface, bend liner. It's happened to me a few times. Fortunately, usually they can be straightened easily by twisting a flat SD between the liners, or liner and lock depending on the model.
I agree with Cody re Vic's rationale for thin Al liners. Brass would be a much better material but would add weight and cost. If I didn't prefer a longer saw, I'd choose a Farmer over my Trailmaster.
-
Huh. Is this really that common? Haven't had this issue yet with my Trekker or Outrider.
-
@WoodsDuck said:
Huh. Is this really that common? Haven't had this issue yet with my Trekker or Outrider.I believe it is fairly common. It happened to my only 111mm knife, a Hunter. The aluminum liner of frame size has a long unsupported section, so I suppose it shouldn’t be surprising. The good news is—as has already been pointed out—that it is relatively simple to fix.
-
@pfrsantos said:
Open that tool and leave it open for a couple of days. Maybe it forces the liner back, or at least, correct it a bit.Awlso...
Welcome to


If you don't want to take the scales off I think subtle like this could work especially if you wrap the knife with leather (or something similar) and pop it in a vice very gently at that end perhaps? Just like you would putting the scales on.
-
@Helvetica Bold said:
If you don't want to take the scales off I think subtle like this could work especially if you wrap the knife with leather (or something similar) and pop it in a vice very gently at that end perhaps? Just like you would putting the scales on.If using a vice, it would be better to remove the scales, open the tools on that side and then use the vice to press them together. Leave it for a day or so and then put the scales back on.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login