What did you just get?
-
-
Welsh made you say! From whom?
I have family in the "land of our fathers" who may appreciate one (or two)

Heinnie! They're made in wales from a Thermoplastic that's very stable so you can chemically disinfect with no problems, very happy with the quality for a tenner, it's already done an admirable job opening the fridge

It'll be great at the cash point next time I pop to the shop

Here you go: https://www.heinnie.com/heinnie-no-touch-tool
-
@GearedForwards said:
Heinnie! They're made in wales from a Thermoplastic that's very stable so you can chemically disinfect with no problems, very happy with the quality for a tenner, it's already done an admirable job opening the fridge
It'll be great at the cash point next time I pop to the shop

Here you go: https://www.heinnie.com/heinnie-no-touch-tool
I shall check it out

Just curious as to how you use it to insert, and remove the card, at the cashpoint (ATM across the pond)

As, presumably, the card comes into contact with the rest of the machine (including the card slot) which has been touched by the great unwashed

-
@SurgeUk said:
I shall check it out
Just curious as to how you use it to insert, and remove the card, at the cashpoint (ATM across the pond)

As, presumably, the card comes into contact with the rest of the machine (including the card slot) which has been touched by the great unwashed

Heinnie now have Brass and Copper tools in from Civivi (budget arm of We Knife) for £26 for those interested.
The card thing is a good point, why must you throw my world into chaos Surge :ahhh

-
@GearedForwards said:
Heinnie now have Brass and Copper tools in from Civivi (budget arm of We Knife) for £26 for those interested.The card thing is a good point, why must you throw my world into chaos Surge :ahhh

Pay with the Contactless feature (up to €50 over here).
If you need to insert the card, have some alcohol desinfectant rubbed in your hands and rub them over the card. Not a large quantity, just enough to pass over the entire card.
-
@MadPlumbarian said:
I just got two antique bicycles, both for $10,, I’ll have a pic of the two in a few min but ones a huffy yet the other is a John Deere!
JRI've heard of those (seen them in Deere coffee table books family friends used to buy me as cheap Christmas gifts) but never seen one in person. At that price, you stole them! Great deal! Deere really went nuts with the consumer recreation market in the '70s and '80s.
-
@cody6268 said:
I've heard of those (seen them in Deere coffee table books family friends used to buy me as cheap Christmas gifts) but never seen one in person. At that price, you stole them! Great deal! Deere really went nuts with the consumer recreation market in the '70s and '80s.Oh I’d say, and the lady had two more antique bikes, I asked her last night, I said I don’t have anything on me would you be willing to get rid of one of the other bikes and she said I could have both, just get them out, so tomorrow the Mrs and I have will be going over to pick up the other two! I only really need one more chain to complete the loop but the gear shifts and junk will be coming off and put in a box because I still need to run the brakes and shift on my custom recumbent trike I’m building, thus which I used the one part of the John Deere frame, perfect! I want to take the anti slip chain disk off the back wheel and put it on my trike but I’ve watched a few videos and you supposedly need a special tool, yet I’ve seen ways around it, I just think matching would be cool!! Here’s some pics
JR


-
Got another Coast G20. For $8, Ill find a use. Great little lights.

-
@BadMechanic said:
Got another Coast G20. For $8, Ill find a use. Great little lights.
Is today light day? I just ordered a glo-toob,, just have to wait..
JR
-
Came in yesterday, but the Climber helped me open the package today; my black oxide Rebar is here!




-
Very nice

-

My new to me Fuse

-
Nice one Steve

-
Just walked home with two more bikes to strip of parts, these are not them but the closest thing I could find to them, but a huffy and amf,, interesting.. I’ve already got half of a John Deere attached to my setup, lol
JR

-
@MadPlumbarian said:
Just walked home with two more bikes to strip of parts, these are not them but the closest thing I could find to them, but a huffy and amf,, interesting.. I’ve already got half of a John Deere attached to my setup, lol
JRWhat are ya making MadP?
Sent from my iPhone using Tapatalk
-
@BClogic said:
What are ya making MadP?Sent from my iPhone using Tapatalk
A recumbent trike, neither the wife and I can drive, I can’t because I have seizures so I need something to ride besides walk, I can ride bike but can’t because if I have a seizure while rolling it ain’t going to be pretty! Now the Mrs has a trike but it’s pretty much the same hight of a normal bike, so the bike would stay upright, but I’m still going over the side, but a recumbent, is a trike but also low, so if I put like a racing harness on it and figure out my ebrake, I can ride and if I have a seizure I might just sit there till everything’s over, even if I don’t put a harness in and I fall off I’m only a few inches off the ground vs 3ft, but here’s a pic of the progress,
JR
-
@MadPlumbarian said:
A recumbent trike, neither the wife and I can drive, I can’t because I have seizures so I need something to ride besides walk, I can ride bike but can’t because if I have a seizure while rolling it ain’t going to be pretty! Now the Mrs has a trike but it’s pretty much the same hight of a normal bike, so the bike would stay upright, but I’m still going over the side, but a recumbent, is a trike but also low, so if I put like a racing harness on it and figure out my ebrake, I can ride and if I have a seizure I might just sit there till everything’s over, even if I don’t put a harness in and I fall off I’m only a few inches off the ground vs 3ft, but here’s a pic of the progress,
JRVery smart. Sorry to hear of your seizures but awesome that it’s not limiting you and gets that creative part of the brain working! Cut, Grind, Weld away!
Sent from my iPhone using Tapatalk
-
@BClogic said:
Very smart. Sorry to hear of your seizures but awesome that it’s not limiting you and gets that creative part of the brain working! Cut, Grind, Weld away!Sent from my iPhone using Tapatalk
Well, even harder on the brain because no welding, all nut and bolt! I can but the flashing brings my seizures on, and I can’t work with the tools by myself cause god only knows what I’d do to myself with just say a grinder? I did it once running a reciprocating saw working with my father, my wife said I almost took his hand off and it was funny as hell! So the Mrs just sits in the corner and reads her books just keeping an eye on me while I do anything, I’m just so limited. No cooking, no sharp objects, no taking a shower unless the Mrs is with me, heck it sucks I can’t even walk outside and walk around the block, once when the Mrs was in a wheelchair I was pushing her chair to the store and I had one, the kids were with us and I had one, I ended up pushing her chair into the street, just kept walking, as the two boys at the time were trying to steer the wheelchair in the other direction, idk what I’m doing, I go blank and wake up in a time jump, funny part was the Mrs told the doc and he said um I think we need to get you a motorized wheelchair! Which made it so much easier!
JR -
Trike looks good so far.

-
@MadPlumbarian said:
Well, even harder on the brain because no welding, all nut and bolt! I can but the flashing brings my seizures on, and I can’t work with the tools by myself cause god only knows what I’d do to myself with just say a grinder? I did it once running a reciprocating saw working with my father, my wife said I almost took his hand off and it was funny as hell! So the Mrs just sits in the corner and reads her books just keeping an eye on me while I do anything, I’m just so limited. No cooking, no sharp objects, no taking a shower unless the Mrs is with me, heck it sucks I can’t even walk outside and walk around the block, once when the Mrs was in a wheelchair I was pushing her chair to the store and I had one, the kids were with us and I had one, I ended up pushing her chair into the street, just kept walking, as the two boys at the time were trying to steer the wheelchair in the other direction, idk what I’m doing, I go blank and wake up in a time jump, funny part was the Mrs told the doc and he said um I think we need to get you a motorized wheelchair! Which made it so much easier!
JRSounds like good support! I can’t believe I didn’t think of welding flashes causing seizures.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
