What did you use your Sak on today?
-
@alexanderre said:
Going to have a kayak trip on weekend, so I decided it’s time to finally use a Black Diamond lantern I’ve bought a few years ago in Chanonix, France, during Mont Blanc ascent trip.To my surprise I discovered the top screws went rusty so a Work Champ can opener helped taking them out

Then pliers to pull them away and to hold while rubbing with a WD-40 soaked cotton bud

It didn’t actually help to remove all the rust, so here I’ve decided to use a diamond file on a Wave

Together those tools can do anything, so here’s the final team and results

Excellent use. A proper repair job, well done

-
Thanks guys [emoji1317]
-
@alexanderre said:
Going to have a kayak trip on weekend, so I decided it’s time to finally use a Black Diamond lantern I’ve bought a few years ago in Chanonix, France, during Mont Blanc ascent trip.To my surprise I discovered the top screws went rusty so a Work Champ can opener helped taking them out

Then pliers to pull them away and to hold while rubbing with a WD-40 soaked cotton bud

It didn’t actually help to remove all the rust, so here I’ve decided to use a diamond file on a Wave

Together those tools can do anything, so here’s the final team and results

Nice work! I have only tried night kayaking once but would really like to so it again
[It's not failure if you learn something from it]
-
The Farmer X proved itself the most valuable MT on the Scout camp out this weekend:
-
With the regular mess kit can opener apparently MIA, the Farmer X's can opener opened a #10 can of baked beans for part of our dinner, as well as about half a dozen cans of pie filling for cobblers for dessert.
-
The scissors trimmed up the ends of several pieces of paracord (as well as a few larger ropes) prior to burning the ends, so that they could then be used for teaching knots to some of the Scouts.
-
-
@nate j said:
The Farmer X proved itself the most valuable MT on the Scout camp out this weekend:- With the regular mess kit can opener apparently MIA, the Farmer X's can opener opened a #10 can of baked beans for part of our dinner, as well as about half a dozen cans of pie filling for cobblers for dessert.
- The scissors trimmed up the ends of several pieces of paracord (as well as a few larger ropes) prior to burning the ends, so that they could then be used for teaching knots to some of the Scouts.

-
...used the Tinker awl to poke holes in the lid of a plastic soap carrier I use, with a sponge, as a home made guitar case humidifier

-
@nate j said:
The Farmer X proved itself the most valuable MT on the Scout camp out this weekend:- With the regular mess kit can opener apparently MIA, the Farmer X's can opener opened a #10 can of baked beans for part of our dinner, as well as about half a dozen cans of pie filling for cobblers for dessert.
- The scissors trimmed up the ends of several pieces of paracord (as well as a few larger ropes) prior to burning the ends, so that they could then be used for teaching knots to some of the Scouts.
The Fieldmaster, when I was in Scouts, I felt was the best all-around camp and hiking knife. The Farmer X, the same package in a much sturdier frame. The standard Scout (mine's a '70s Ulster) can't handle Phillips and doesn't have a saw. Can opener is marginally worse than the SAKs--and Scout Stuff wants almost the same as a Fieldmaster for what is basically a $15 Marble's Camp Knife made to look like the old American-made Scouts. You can't saw wood with it (no saw), and scissors are absolutely the best for precision cutting jobs.
-
@nate j said:
The Farmer X proved itself the most valuable MT on the Scout camp out this weekend:- With the regular mess kit can opener apparently MIA, the Farmer X's can opener opened a #10 can of baked beans for part of our dinner, as well as about half a dozen cans of pie filling for cobblers for dessert.
- The scissors trimmed up the ends of several pieces of paracord (as well as a few larger ropes) prior to burning the ends, so that they could then be used for teaching knots to some of the Scouts.
Great work nate!
Sent from my iPhone using Tapatalk
-
Thanks all!

-
@cody6268 said:
The Fieldmaster, when I was in Scouts, I felt was the best all-around camp and hiking knife. The Farmer X, the same package in a much sturdier frame. The standard Scout (mine's a '70s Ulster) can't handle Phillips and doesn't have a saw. Can opener is marginally worse than the SAKs--and Scout Stuff wants almost the same as a Fieldmaster for what is basically a $15 Marble's Camp Knife made to look like the old American-made Scouts. You can't saw wood with it (no saw), and scissors are absolutely the best for precision cutting jobs.I wasn't keen on any of the scout knives or BSA versions of the SAKs (Huntsman... which was really a Fieldmaster... and Climber, iirc from back then). How times change.
-
So a laundry hanging system we have at the balcony has fallen off the ceiling recently - probably put too much weight on it.
Bought a replacement system + new screws and tried to remove the screws left from the old system. New screws are large - 5x80 mm - so I started off by checking if all 8 holes in the ceiling are equally deep and large and that the new screws would fit in. Started to screw them in using a large Phillips on the Work Champ and it all was going well up to the point where the screwdriver eventually collapsed and I had to pick up a Leatherman Signal instead. Finished the job, but discovered that Work Champ got some dust in it again and both Phillips drivers started to open and close with scratchy sound. Had to wash it thoroughly and oil. No issues with Signal whatsoever.
Conclusion: don’t use Vics with sandy elements around - they seem to hate it really.
Conclusion 2: good to have a choice of decent tools handy when you need them
-
For eat.

-
Nice

-
The plastic line that dangles the fuel cap from the fuel filler door on my car broke so I used my Pioneer to help make a new one. Used the can opener tip to undo the one soft plastic automotive phillips head screw. All I had with me to create a new line was some fishing line, so I used the awl to drill small holes in both the fuel cap (where the line broke) and the retainer on the filler door held on by the screw, then tied the fishing line to both holes. Trimmed some excess plastic with the awl blade and cut the fishing line with the main blade. Better solution than what came from the factory in that it doesn't touch the fender and scratch my paint!

-
Nice job

-
Had one of those annoying mustache curlers that wanted to hook in so the pioneerX took care of him!
JR -
@MadPlumbarian said:
Had one of those annoying mustache curlers that wanted to hook in so the pioneerX took care of him!
JRYes my stache need the scizzors too

-
This use needs a little CAUTION! Especially when the Mrs is extremely nervous! But she had a massive wad of earwax in her bad ear, so we used the peroxide trick a few times then also a remover bulb a few times but still didn’t work, and this thing was killing her all day, I wanted to attempt with tweezers but she just started to freak, so as she was laying I grabbed my sak, and used it’s tweezers, started working, then popped out the corkscrew, then she’s like uhh what are you going to do with that? Oh this nothing, lol, don’t worry, and I slid the pin out, I slowly worked some of the wax as she’s freaking then needed a break, and one last time I grabbed the tweezers and got a good amount out, well do more peroxide and syringe tomorrow, but she needs a break! Sak’s are very useful but not toys!
JR -
@MadPlumbarian said:
This use needs a little CAUTION! Especially when the Mrs is extremely nervous! But she had a massive wad of earwax in her bad ear, so we used the peroxide trick a few times then also a remover bulb a few times but still didn’t work, and this thing was killing her all day, I wanted to attempt with tweezers but she just started to freak, so as she was laying I grabbed my sak, and used it’s tweezers, started working, then popped out the corkscrew, then she’s like uhh what are you going to do with that? Oh this nothing, lol, don’t worry, and I slid the pin out, I slowly worked some of the wax as she’s freaking then needed a break, and one last time I grabbed the tweezers and got a good amount out, well do more peroxide and syringe tomorrow, but she needs a break! Sak’s are very useful but not toys!
JRgood job, hope she gets to feeling better!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login