Leatherman Free P2/P4 Club and Feedback Thread
-
I m in debt. Here you are photos. I wasn t able to find them yesterday.




-
Here you can see Phillips screwdriver and flat one are thicker than Surge

-
Great pics for comparison
but that last one is the 2 blades instead of the screwdrivers :D Either way thanks for the pics

-
I have had my P4 for a couple of months now and I am impressed with the overall quality of the tool. It is a precision mechanism but from a functional standpoint, my personal preferences deviate somewhat from the tool as it is currently designed.
Before I purchased the P4, my EDC was the Leatherman Charge Titanium and I am still torn, whether to carry the P4 or the Charge. One thing about the Charge is that both the regular knife blade and serrated blade are diagonally opposite one another and both blades have an increased blade height, that is from the cutting edges to the back side of the blade, at the thumb aperture, which enables access so that the thumb conveniently and naturally slips against it making the one hand opening easily accomplished and the 180 degree opposition means you simply rotate the tool in your hand 180 degrees to access either blade.
Leatherman didn't similarly position the blades on the P4 and the serrated blade does not have the increased height to the thumb aperture. The first thing I did was to reposition the serrated blade diagonally opposite the regular blade but because it does not have the increased blade height and thumb aperture position, the serrated blade is not as easy to open with one hand. So I would suggest to Leatherman that they position the blades diagonally opposite one another and increase the height of the serrated blade for easier access to the thumb aperture for easier one handed opening. In a heads up to ZapWizard, I ordered 4 of his 3d printed, one hand thumb assist inserts. They engage the thump apertures and though not really required on the main blade, one such insert is extremely useful for one handed opening of the serrated blade.
Two other suggestions I have are that the omission of the bit holder was a mistake. You are limited to one size of Phillips screwdriver and so smaller Phillips screws are outside the reach of the P4 also other bits such as Torx and Allen are extremely useful. Also, the very small screwdriver tool was omitted, which accommodates a flat head and Phillips screwdriver at the opposite end, useful for work on eyeglasses and other very small screws. This very small screwdriver is also useful for clearing small orifices in nozzles or other such openings.
See pics.



-
I forget, does the Removable Bit Driver work on a P2/P4?

-
@Syncop8r said:
I forget, does the Removable Bit Driver work on a P2/P4?
From what I have seen you need one of the old universal adapters (which one I can't tell you
), or a 1/4 socket over the Philips and flat/package opener. If you go the second route then the edge of your package opener will get ruined mighty quick.
If your not against modding your tool the Zappwizard has released a flat bit holder on shapways. It takes the place of the Philips and flat (or others if your willing to do some tool switching). I'm waiting for one as we speak, along with the T-shank adapter
-
Hey all, still pretty new here and thought I would revive this thread since I'm also a new Free P4 owner. I have honestly loved this tool the last couple weeks with it. It has come in handy quite a few times, especially the one hand opening ability. I feel this tool has gotten a fair amount of undue negativity. I will say it isn't a wave since it doesn't have the file, and bit exchanger which is why I also have the Charge + tti. I also don't think it should have been marketed as better than the wave. It should have just been marketed as a new tool with new technology, in a new category. And if you see it from that view. This thing is a solid piece of tool. Everything is super sturdy and well built, albeit the file is a bit small and "ruler" is a bit laughable, though for most uses when you need a quick to grab tool for prying, grabbing with pliers, cutting, or even screwing in some general stuff, it works fantastic. Nothing is perfect but I love what the P4 does and how it feels to use.

Sent from my SM-G950U using Tapatalk
-
The Free P4 is my favorite multitool. I enjoy using it, chiefly due to its ease of deployment. My P4 pliers don't have the problem that some other have reported and I am sympathetic with those owners who expected better QC. However, I think much of the other criticism about the P4 is undeserved.
-
Wow. After reading this whole thread, I am sort of happy I haven't bought a P4 yet. Trying to justify the almost $200 dollar Canadian price tag...and this thread did that concept no good.
-
@Chako said:
Wow. After reading this whole thread, I am sort of happy I haven't bought a P4 yet. Trying to justify the almost $200 dollar Canadian price tag...and this thread did that concept no good.With the price being $200 Canadian I can't blame you but I would still think about it if you can get it for less since it really is a great tool.
Sent from my SM-G950U using Tapatalk
-
@parnass said:
The Free P4 is my favorite multitool. I enjoy using it, chiefly due to its ease of deployment. My P4 pliers don't have the problem that some other have reported and I am sympathetic with those owners who expected better QC. However, I think much of the other criticism about the P4 is undeserved.It deserves most of it. Let me know when you master the one hand tool opening, get used to the palm hotspots on the handle ends and find a use for a 1” rule or file. It does not have many fans on this forum. >:(
-
@Max Stone said:
It deserves most of it. Let me know when you master the one hand tool opening, get used to the palm hotspots on the handle ends and find a use for a 1” rule or file. It does not have many fans on this forum. >:(You may be one if the few who has that many grievances with the tool actually. One hand tool opening is quite easy and did not really take much if any time to get the hang of. Palm hotspots arent a thing, it is just as comfortable as nearly any other leatherman I've used. Holding it differently? I'll give you the ruler is quite laughable but the flat head on that tool works well. The file is small especially in comparison to other Multitools (except maybe the wingman?) But is aggressive and works well when need something quick. I'm sorry you dont feel the same. I feel from an open mind. It is a great tool for what it is and quick, one handed use of everything.
Sent from my SM-G950U using Tapatalk
-
@Max Stone said:
It deserves most of it. Let me know when you master the one hand tool opening, get used to the palm hotspots on the handle ends and find a use for a 1” rule or file. It does not have many fans on this forum. >:(Max, in another topic you posted that you had a Free P2. I have a Free P4 and no problem with hot spots. The P2 and P4 have different frames. The P4 is wider and its frame edges are rolled smoothly along the entire length when using the pliers. The narrower P2 frame has a sharp, non rolled edge on one side of the frame near the pliers head.
Perhaps these differences account for a difference in comfort.
I am left handed and one hand opening tools are usually designed for right handed users. I am able to open the tools with my right hand, but it is awkward.
-
Correct, I refer to my P2 and am also left handed. I am not bothered being in a minority. I have plenty of MTs that don’t give me thumb cramps or hurt my palms. And they’re mostly LMs.
-
I was thinking about the ruler.. It's small and redicoulous if you compare it to a "normal" ruler.. But what's the intended purpose? I don't have any of the free tools but I saw some commercials for it when advertising it for when doing mechanical stuff and only have one hand free to operate the tool and if that's the case isn't the ruler long enough to measure a bolt or spacing between stuff in tight areas, or to get a general feel for how big nut you need or something along those lines?
And if so, it's a fairly good size?
[It's not failure if you learn something from it]
-
@Max Stone said:
It deserves most of it. Let me know when you master the one hand tool opening, get used to the palm hotspots on the handle ends and find a use for a 1” rule or file. It does not have many fans on this forum. >:(I've tried out the P2 and P4 in a local shop (took my time for it). I cannot get used to the one hand opening of the inner tools. For me "personally" there is no advantage coming off that magnet feature

I also dislike the "awl" or the length of the file.
These are not for me.
...oh... and I prefer the old style can/bottle opener

-
@kottskrapa said:
I was thinking about the ruler.. It's small and redicoulous if you compare it to a "normal" ruler.. But what's the intended purpose? I don't have any of the free tools but I saw some commercials for it when advertising it for when doing mechanical stuff and only have one hand free to operate the tool and if that's the case isn't the ruler long enough to measure a bolt or spacing between stuff in tight areas, or to get a general feel for how big nut you need or something along those lines?And if so, it's a fairly good size?
[It's not failure if you learn something from it]
Good point and way of looking at it. I hadn't really considered it that way but in that case the ruler is useful for these types of tasks. After all, multitools really are not meant to take the place of full size, dedicated tools.
McStitchy I'm sorry it doesn't work well for you. No tool is right for everyone. The magnets work really well for me and for my uses to access the tools quickly, easily, and one handed.
Sent from my SM-G950U using Tapatalk
-
I just pulled the trigger on a P4 from Amazon. No local folks selling this, and my collection needs to get the Free clan somewhat representing.
-
I finally got to handle a P2 at a local sports store. I have to say that I was not impressed at all with it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login