What's your latest SAK?
-
Some lovely new additions to collections here!
I found a PX going cheap, so finally bit the bullet and had a go at some modifying of 93mm knives. First I dismantled the PX with silver scales, centre punching then grinding/drilling the rivet heads off with my Dremel without damaging the alox scales - seemed to work well at the first attempt. Next I did the same to a SE Harvester from a German SAK dealer I got a while ago as I liked the dove on the main blade (just happens to be my surname!), though I’m not a fan of the scales, though the blue is nice - however I was not as tidy in rivet removal and managed to mark the front scale a little
. Tapping the rivets out with a punch/drift is pretty simple. I laid all the parts out and wiped off the grease. Then I swapped the 2 blades over, and swapped the spacer and spacer with key ring hole in it over, and set to assembling the parts of the harvester with key ring together using the silver scale and some M2 tx6 bolts 6mm long, though 5 may have been better, will have to shorten my stock for the next mod, and the 11mm pivots I got from Moscow courtesy of Etsy and the supplier others have listed, and assembled my new Harvester for use in the garden, the red lanyard should help it stand out if I drop it. The assembling was not as hard as I feared it would be as the system is not in as much tension as a 91mm mod, but it still takes a bit of dexterity to keep it all together, and 2 tx6 bits are needed to help screw the package together, one either side of the knife.This left me parts for a Pioneer X with a dove on the blade, but this time I used Titanium scales (I’m a bit of Ti fan....) again via Etsy, but this time from Mike’s mods - a really nice guy to do business with, the scales came with 2 sets of blued tx6 screws, one set of 2-layer pivots, one set of 3-layer pivots and loads of super then brass washers to use as bushings between the scale and tools (alox scales have them machined in) - the only drawback is that he’s in Australia so it takes a while for stuff to arrive, but well worth the wait. This went together even more easily than the harvester. I have plans to make a magnifier to replace the can opener at some point, and I’ll share the details on that when I get to making it. But for now I now have 2 93mm mods, a Harvester with lanyard and a Ti scaled Pioneer X. I have to say that if I can do it, anyone can!


-
Nice job Rizio Il Ghiro!
Edit: I removed your first name for privacy reasons. Since we all now know your surname is "dove on the main blade" :P
-
Well done, they look great!

Sent from my SM-T387V using Tapatalk
-
Reinier, it can be a bit of a mouthful!!

-
Cheers, Acuphys 1

-
Damascus 2020
More info and pics on <a href=https://swissknives.info/victorinox-hunter-pro-alox-damast-2020/>my blog</a>
-
Nice SAKs everyone

-
@Rizio Il Ghiro said:
. Next I did the same to a SE Harvester from a German SAK dealer I got a while ago as I liked the dove on the main blade (just happens to be my surname!), though I’m not a fan of the scales, though the blue is niceFor anyone who might not know, the Hebrew word on the scales is "shalom" - peace - hence the dove on the blade. Very cool knife!
-
My latest 2 finds have been a Matterhorn which completes the 3 60% serrated mountain series, and an original Outdoorsman. (I really wish this one was easier to find as this will be a shelf queen, but I'd like to have what amounts to a Ranger with these types of blades).
In the pics this is the Rainier, McKinley, and Matterhorn (or 60% serrated Huntsman, Tinker, and Deluxe Tinker). -
@victor7000 said:
Damascus 2020More info and pics on <a href=https://swissknives.info/victorinox-hunter-pro-alox-damast-2020/>my blog</a>
That's just beautiful!

-
Latest on-hand is the big mac daddy in its proper outfit:
Have a Farmer X Alox en route any day now and eyeing a second-hand Ranger for a steal. If it's in good shape I'll pick it up... never bought a used SAK before and never really considered the Ranger (they're quite a bit more than some similar models new) but at the price it would make a great "beater" knife if it turns out to be a bit rough.
-
@Altis said:
Latest on-hand is the big mac daddy in its proper outfit:Have a Farmer X Alox en route any day now and eyeing a second-hand Ranger for a steal. If it's in good shape I'll pick it up... never bought a used SAK before and never really considered the Ranger (they're quite a bit more than some similar models new) but at the price it would make a great "beater" knife if it turns out to be a bit rough.

I have spent many sleepless nights wondering if the proper outfit for a SwissChamp was red or black. Ultimately I went with red (put the scales on myself... so I had to be committed). I wonder what model looks best in back. Huntsman perhaps?
-
I have spent many sleepless nights wondering if the proper outfit for a SwissChamp was red or black. Ultimately I went with red (put the scales on myself... so I had to be committed). I wonder what model looks best in back. Huntsman perhaps?
You and I both! I think it might even look slightly better in black, but being one of the most defining Swiss Army Knives, it had to be red for me.
The only black SAK I own so far is the Compact (91mm). This is one I would bring to social settings, so not only does it match better with dressier attire, but it is a bit more classy and modern like the Compact, and less outdoorsy/repairmanish. Wish the Manager came in black for similar reasons.
Handyman would be another good option for black scales. Similar to Swiss Champ, but a little more sleek, and since it only comes in non-plus red scales, there's a good excuse to replace them. 8) Huntsman and Explorer look great in black, too, as does the little Classic.
-
Evo 88 was just freed from this paper prison by my trusty SwissChamp.

Another recent acquisition was a butter blade spirit I gave to my dad, and I'm supposed to reacquire a Spirit that's a wedding gift for my brother and his wife today. Concerningly enough I don't even remember buying that one.
-
For my 5000th post

A mail delivery today from the local Vic agent that just received their first post-lockdown shipment:
- Alox 2020 Limited Edition Pioneer
- Farmer X
So several reasons to have a little celebration today!





-
Thanks 39hotrod

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

