Dean51 Memorial 30 Day Traditional Challenge
-
Day 16: Sorry it's so late. I did yard work, farm work, and helped neighbors put up hay on our property. Spent most of the evening playing Farm Simulator. Folks first bought me (2013?) I think it was, before I was allowed on tractors as a cheap teaching tool. I've bought a few of the successors, most recently 2019 early this month. My rule is--no videogames where I would not do anything I wouldn't in real life. And in today's case--plowed a couple fields, cut down a tree that was in the way. I've done both in real life--including just cutting a tree off a fence earlier this week. Yep, boring. But, I mostly use European tractors, and larger than what is found on farms around here.
Camillus Cub Scout Knife again. I've added a P-38. I didn't use a can opener that often, but decided better have one and not need it, than need it and not have it. Also works good to scrape and pry with. And, I've laid out my Opinel for tomorrow, since heavy cutting and OHO are not needed. It's the 6. All the patina is from regular use--not forced.
I will admit, I didn't use it a whole lot. I used a Buck 345 Vantage for most of the cutting, as when working around implements, a one-handed opening knife is compulsory after reading about the incident where a guy cut himself out of an implement with his pocketknife. Rebar was used to help fix the baler when it broke (older Fiat Hesston that used belts; the belts twisted themselves up), cut some wire closing a gate up, and cutting some rope with the serrated blade. And by accident--the first time my glasses have ever been in an EDC shot.

-
Some really great pics of gorgeous blades

DAY 16. Buck Creek getting a touch up then testing. I think it'll cut.

-
@Aloha said:
Some really great pics of gorgeous blades
DAY 16. Buck Creek getting a touch up then testing. I think it'll cut.
They have some good steel in them. I've got a Diamondback Stockman, but the celluloid handles are starting to go bad (why did they use them in the 1990s, when everyone else stopped by 1960?). Thus, gonna have to get them replaced; probably with ivory G-10, or some kind of acrylic.
You've got to watch the Buck Creeks that use celluloid handles; as they have a huge propensity to have the celluoid go bad, outgas, rust everything severely and immediately, and ruin the knife.
-
-
@cody6268 said:
...
I will admit, I didn't use it a whole lot. I used a Buck 345 Vantage for most of the cutting, as when working around implements, a one-handed opening knife is compulsory after reading about the incident where a guy cut himself out of an implement with his pocketknife. Rebar was used to help fix the baler when it broke (older Fiat Hesston that used belts; the belts twisted themselves up), cut some wire closing a gate up, and cutting some rope with the serrated blade. And by accident--the first time my glasses have ever been in an EDC shot.
That's quite a story there :o
Nice natural patina on the Opi... and again... the Rebar shines
-
Day 17
Staying on my continental tour today and heading for France. Not an Opinel though but the OTHER French knife; the Laguiole. Somewhat devalued by cheap copies made elsewhere a true, French made, Laguiole is a pleasure to own. 8)

-
Powernoodle Day 17
As my Opinel No. 2 slept, she dreamed of the promised land . . .

. . . the grey rain curtain of this world rolled back, and all turned to silver glass. And then she saw it . . . white shores, and beyond, a far green country under a swift sunrise.
*

As she woke with a start, she was confronted with the somber reality that it had never happened. It was but a diaphanous memory of what might have been.*
-
Day 17
GEC Oilfield Jack and a Camillus AAC Utility

When GEC came out with the Oilfield Jack Dean was smitten. He ended up getting three of them and it makes me happy that he got to enjoy his perfect knife even if it was for a short time. :)
@Dean51 said:
These came in yesterday but put off pics because of the rain.
I
m had a lot of very high exceptions for these knives and wasn't disappointed. Some years ago in a post I described the perfect knife as a jack with two full size blades , a clip and sheepsfoot. I've seen close but none that were quite right.
Until now, I have found the perfect knife if a man could have only one.


@Dean51 said:
This is my first acrylic, I've never been a fan of the stuff. Always looks like candy.
When I saw the tortoise shell on the Oilfield, I couldn't wait to click buy.

-
Day 17: Case Barlow and some instant fuel!

-
Thanks Cody. I keep an eye on mine just in case. I would love to get some nice iron wood or koa or something interesting. I could also see some stag or bone on it. The steel on it is pretty nice. Whatever heat treat they did they got it right. I initially thought it was BUCK knives but a little research told me otherwise. It didn't get carried a lot but when it did I really enjoyed it.
-
-
Day 17

Le Theirs Rotosphere and GEC 97. Some may have seen me showing the Rotosphere in the last challenge, and in case anyone is curious, I think this is a really fun conceptual knife than practical user. The sphere hole is large enough that when the blade in closed position, you might be able to touch the blade. Also, they didn't do a good job of friction sandwich the blade, so it rotates quite freely(which is not a real problem), but the real issue is the tip of the blade is actually touching the pivot pin at the end of the handle when in closed position.
-
Staying on my continental tour today and heading for France. Not an Opinel though but the OTHER French knife; the Laguiole. Somewhat devalued by cheap copies made elsewhere a true, French made, Laguiole is a pleasure to own. 8)
Lovely! I was debating within myself this morning whether I would carry this Le theirs or the Laguiole. :D
@Barry Rowland said:
Day 17: Case Barlow and some instant fuel!My life depends on the same kind of instant fuel, day in and out!

-
Great minds think alike Comis. :D
Go to say I like the look of the Rotosphere. 8)
-
Great stuff today, guys.

-
Day 17: Opinel #6 and Schrade China (Taylor) LB-7. The Chinese LB-7 is nowhere the knife the USA-made one is. For the price, I'd say Buck 110LT. $20, American made ,better warranty, better steel, etc. I noticed that the steel was very soft when sharpening it. It locks solidly, and is quite cheap; so I don't care what I do with it, but I will polish the bolsters. It came in a used lot, and spent most of the year since in a damp basement, in a tacklebox. Not knocking Chinese knives, however. Rough Rider can produce a superior knife with better steel and workmanship for less money than the Chinese Schrades. Sanremu as well. If Smith and Wesson (current owners of Taylor) had a case of "give a crap" I feel they could produce much improved designs, with superior steel and workmanship to even the USA models. What they make now is an insult to the Schrade name.

-
Thanks guys

Day 17

Staying on my continental tour today and heading for France. Not an Opinel though but the OTHER French knife; the Laguiole. Somewhat devalued by cheap copies made elsewhere a true, French made, Laguiole is a pleasure to own. 8)
I have a healthy respect for the guys and girls making those, i picked up a kit from France during the last challenge and it was a fight to get it right, to be fair they did warn you that it's bare parts and every part would need work, thankfully they warned also not to peen the last pin as you will have to strip it multiple times to get it right, i must have had it apart 10 times to file bits, it was a fun build and i'm really happy with it but never again :D



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
