What did you just get?
-
Nice looking knife

-
Came in today, sorry you can’t see what it is but three bike chains, obviously the same, but the recumbent trike I built had like three diff ones on it since I used parts off of diff bikes, and well, the Mrs and I were about a 1/2mile from home on a very hot day and the chain broke, needless to say I ended up having to push it allll the way home steering with my foot, but she ordered me nice silver stainless steel chains that came with master links so all I had to do is punch one to get it to the right length and it would be good to go! Well I spent about an hour trying to get that dang pin out since I don’t have the tool and finally did, snapped the last link, and took it for a spin up and down the street, must say, shifted and peddled much better!
JR
-
@MadPlumbarian said:
Came in today, sorry you can’t see what it is but three bike chains, obviously the same, but the recumbent trike I built had like three diff ones on it since I used parts off of diff bikes, and well, the Mrs and I were about a 1/2mile from home on a very hot day and the chain broke, needless to say I ended up having to push it allll the way home steering with my foot, but she ordered me nice silver stainless steel chains that came with master links so all I had to do is punch one to get it to the right length and it would be good to go! Well I spent about an hour trying to get that dang pin out since I don’t have the tool and finally did, snapped the last link, and took it for a spin up and down the street, must say, shifted and peddled much better!
JRSounds like you might need a new MT with a chain tool to keep with your trike.
-
@MadPlumbarian said:
Well I spent about an hour trying to get that dang pin out since I don’t have the tool...


-
That looks like an interesting tool! I got to get a little tool kit, fak, and set it up for an on trike carry, I mean they have those setups that attach to a bike frame but you lock the bike up to go in the store and someone can just walk over and un-Velcro it from the frame and walk off with a good price of stuff.. so I was thinking of what to put on that I can store item, won’t get wet, and something they can’t walk off with? The only thing I could come up with was a ammo can, bolt it to the frame somewhere, add a lock to it, and just toss whatever in! Just where do I mount it?
JR -


There is also the Crankbrothers M19

Or Lezyne

@MadPlumbarian said:
That looks like an interesting tool! I got to get a little tool kit, fak, and set it up for an on trike carry, I mean they have those setups that attach to a bike frame but you lock the bike up to go in the store and someone can just walk over and un-Velcro it from the frame and walk off with a good price of stuff.. so I was thinking of what to put on that I can store item, won’t get wet, and something they can’t walk off with? The only thing I could come up with was a ammo can, bolt it to the frame somewhere, add a lock to it, and just toss whatever in! Just where do I mount it?
JRFor something to put the kit in, you could always look into a beach style lock bag, like the FlexSafe. They make a few different types that are meant to be able to lock and protect items in the beach environment.

-
New page banana dance

-
-
Brass Shiny Stubby Fat Pen in copper, brass and aluminum from a Kickstarter project, nice and weighty already getting a patina.

And (having a good day!) a SAK Compact to compliment the manager on my keychain



Sent from my iPhone using Tapatalk
-
Nice

-
@Echotech said:
Brass Shiny Stubby Fat Pen in copper, brass and aluminum from a Kickstarter project, nice and weighty already getting a patina.
And (having a good day!) a SAK Compact to compliment the manager on my keychain



Sent from my iPhone using Tapatalk
Very nice. The Compact has a lot of utility for its size
-
Well honestly, two 60 something Monte Carlos, and a big block, there not mine but the kids they just happen to be sitting in my driveway and garage! Anyway the one is a parts car for the other which is the project, and after about 20min and we finally got the trunk popped there were a few things in it along with a few double ended wrenches, but the other car showed up and no one saw this one, and I figured no one would like it so I snatched it, and figured maybe make it into one of those pocket pry bars, be about 4in(10cm) I just figured it would be a good little project! There was an old mini tape measure in the front but that was poor condition..
JR
-
Good idea JR

-
A couple of 36 inch oak handles for my 16 pound sledgehammer and 5 pound maul.
-
In one of the cars the kid got in the deal I found a tape measure, I tried cleaning it up and fixing it but the blade was so rusted I just took a crappy one and replaced it, took a while, and it just doesn’t seem to want to snap like brand new but does, I just had something hold it out so you could see it wasn’t the original, but hey it’s a Lufkin!
JR
-
@MadPlumbarian said:
Well honestly, two 60 something Monte Carlos, and a big block, there not mine but the kids they just happen to be sitting in my driveway and garage! Anyway the one is a parts car for the other which is the project, and after about 20min and we finally got the trunk popped there were a few things in it along with a few double ended wrenches, but the other car showed up and no one saw this one, and I figured no one would like it so I snatched it, and figured maybe make it into one of those pocket pry bars, be about 4in(10cm) I just figured it would be a good little project! There was an old mini tape measure in the front but that was poor condition..
JRWhy not keep the wrench part and use the other end to turn into a pry bar? You get an instant keychain loop, get to have a wrench + pry bar, instead of just a pry bar and it'll be less work to do...

-
I got a second Lumitop EDC05c. I love this little flashlight. It is a small rechargeable light that can be used as a regular flashlight or a lamp. The side lamp is a nicely diffused HiCri that could light up a room or tent.

This is a picture with the lamp side on low shining

The only complaint I have is wishing that it could use a regular non-rechargeable AA in emergency. -
@pfrsantos said:
Why not keep the wrench part and use the other end to turn into a pry bar? You get an instant keychain loop, get to have a wrench + pry bar, instead of just a pry bar and it'll be less work to do...

It’s an idea, but that wrench end is kinda big rather then just a slim bar, the only work I’d really be saving is the drilling of a hole,, the only plus of keeping the wrench would be that everyone would know what it was, a 22 box end wrench,
JRThis is a pioneerX to give you an idea of how wide that end is, as you can see the handle is about the same and the heads about double, I like the idea, it’s also thick too, so it’s got some weight to it also, now those other wrenches sitting in the garage, there open end and in the teens not a 22, and made up a little diff, so maybe if I got the kid to give me those to work with, but again there open end so I would have to drill a hole somewhere.. also any clue what that symbol is with the A and what looks like 301?
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
