What do we have on the way?
-
@Captain Hook said:
Some Knipex combination pliers for EDC. I've tried hard to resist the temptation of carrying dedicated pliers for some time now, in an effort to not look like a dork. But I look like one with the tie dye shirts and converse Chuck Taylor's i wear everyday anyway so I don't care anymore
These will be getting paired with a Wenger Handyman. Match made in heaven
Great combo! Will you carry the Knipex in a pouch?
-
@cody6268 said:
Spyderco Byrd Slip-It Wings. It is a factory second, but for $40, I couldn't say no, given they've been discontinued for several years. Been wanting a knife with dual OHO plain and serrated blades for ages. I'm not buying any more 111mm SAKs for users due to liner strength, so Dual Pro, Hunter XT, and Dutch Army Knife are out. Benchmade Outlast is too expensive (but, might I add, my absolute dream knife), as is the Spyderco Dyad. The Byrd is basically the same thing, except modified for use in Spyderco's budget Byrd line.At 3 3/4" closed, it's just about right. Definitely gonna see use in the challenge this month.

Nice -
Believe it or not a couple of slipjoints :D
-
@Captain Hook said:
Some Knipex combination pliers for EDC. I've tried hard to resist the temptation of carrying dedicated pliers for some time now, in an effort to not look like a dork. But I look like one with the tie dye shirts and converse Chuck Taylor's i wear everyday anyway so I don't care anymore
These will be getting paired with a Wenger Handyman. Match made in heaven
Considering I wear DIckie's mechanic's shorts that have a pliers pocket, they don't look out of place at all. I usually have the 160mm Combination Pliers and/or the 125mm Cobra in addition to a SAK and/or MT depending on the job.
-
May have made an expensive boo-boo here at just under $100 for this "Parts or Repair" lot of Kershaw A-100s, but I think I can repair #1 and #3 with parts from #2 (hardware) and #4 (again, hardware).


-
@cody6268 said:
May have made an expensive boo-boo here at just under $100 for this "Parts or Repair" lot of Kershaw A-100s, but I think I can repair #1 and #3 with parts from #2 (hardware) and #4 (again, hardware).

$100 is not a mistake for 4 MTs (is it
)I can only imagine what I would have to pay here in the UK (even if they would ship :ahhh
)Good score

-
@cody6268 said:
May have made an expensive boo-boo here at just under $100 for this "Parts or Repair" lot of Kershaw A-100s, but I think I can repair #1 and #3 with parts from #2 (hardware) and #4 (again, hardware).Even if you only managed to get one complete A100 from the lot you are doing OK based on the prices I've been seeing on evilbay recently

When you've finished re-building I might be interested in buying your leftovers to use for replacing missing bits on a couple I have. Let me know if they are surplus to your requirements.
PS: Remember to use a bit of heat on the screws to loosen the locking compound (I'm going to try a soldering iron next time to isolate where I apply the heat)
-
-
Well after much agonizing debate I ordered a GEC H30119 over the GEC #23 Pioneer Trapper in Woodland Micarta. Can't say I still wont get the #23

-
Well I have a very unique wood staff soon to be on its way! It’s unfinished so I get to make it custom, what’s so unique you ask? The wood is from a cactus! Anyway here’s what’s on its way,,
JR
-
-

Of all the first GECs to get to
. COVID saved me some money strangely so I had a few bucks to spend. I like the Dixie Stockman and that Possum you have. I wanted something different that what I currently have tho so I'm still looking. GEC folk buy them up quick so theres not a lot in my price range. The secondary market is pricey. -
There are still a few Dixie Stockmans on dealers shelves but yes they do go fast these days.
-
There are plenty of GECs about, just avoid the hot models.
Some models remain unsold for years and functionally are fine, just not popular enough to be of interest to fans and too expensive for the casual buyer who can get a case, buck, RR for the same task cheaper.
-
Thanks. Its an interesting group who buy GEC. They have made one heck of a business thats for sure. I also like the Pioneer Trapper which doesn't seem to be very popular as its also available.
-
@Aloha said:
Well after much agonizing debate I ordered a GEC H30119 over the GEC #23 Pioneer Trapper in Woodland Micarta. Can't say I still wont get the #23
GEC's fixed blades, for the most part tend to be a tiny bit cheaper. I think the #23 is one of their more popular models, which is why they're so hard to get. I'm a fan of Jumbo Trappers, and a good cheap alternative is the Remington Bullet pattern reproductions by Camilllus and Bear and Son. Utica made one as well, in addition to a cost-effective import called the Pigman Hog buster. \
The GEC's on my list all have sub-3.5" blades, as it's what not only is legal to carry, but also practical.
-
I've seen the Remington Bullets
very nice knives. While I like the little knives I would like just a little more reach in some instances. -
A victorinox executive is on it's way! 8)
-
I wrote the guy who’s sending me the saguaro wood staff and apparently it’s been sent and should be here by the end of the week,, I so can’t wait!!
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
