Deep in the Spydie Hole Challenge- August 2020
-
DAY 11
Cooked up some flounder with the endura


-
Day 11. Gonna admit I kinda cheated. Had some rough, dirty yardwork to do, and I didn't have a knife on me when I went to do it, so I grabbed my Sanremu 7010 Camo, the first knife I could find when I walked into my room. Have to admit, this is the best knife less than $20 can buy. Cheap enough to be a beater, but nicely made enough to be a regular EDC. I haven't much, due to the two back-to-back challenges. I chose this version because I liked it the best. However, the sort of Cerakote material on the handle is grippy, and the coating on the blade means stuff doesn't stick. I used it to cut some vines growing in a flowerbed.

But, I started today (when I ran some errands) with the Harpy. I was melting the ends of the paracord lanyard I'd put on some days back and burnt my finger with the lighter. Dropped it maybe 10 feet off the porch and it fell into dirt in a flowerbed (and might I add, it had to be the holly bushes, meaning it was painful!), which filled the pivot full, meaning I had to clean it.

And I finished today with the Byrd Wings.

.
-
I wound up using the pliers on my Rebar when fixing my dog fence today, but the PM 2 did the zip tie cutting. Do you all strop your Spydie blades?
-
I do, Barry.
I strop after honing and occasionally between touchups. I'm a devoted user of the strop.

....however, I'm not sure how much of a difference it makes with some of the "Supersteels".
Regardless, I strop.
-
@Barry Rowland said:
I wound up using the pliers on my Rebar when fixing my dog fence today, but the PM 2 did the zip tie cutting. Do you all strop your Spydie blades?About once a week or so on a scrap of cardboard for PE blades, and after sharpening no matter what. With my use and habits of heavy rotation, I don't need to sharpen my Spyderco or other premium steels that often--like once a year. I don't with the serrated edges. I need to pickup a proper strop and some of the green paste.
-
Day 11:
Been cutting parts boxes open, but can’t get pics of that.
Glamor it is, so here it is, my Autonomy 2...


Sent from my iPhone using Tapatalk
-
@Barry Rowland said:
Do you all strop your Spydie blades?I strop all my blades in between sharpening. I have a double sided strop which has a course on one side with green compound, and a fine on the other with white fine compound, they just get a few strokes on each side and it keeps them nice and sharp for most of the time, but occasionally they need a quick session on the edge pro, or even just a few strokes on a fine ceramic rod.
-
Day 12:
Some more electrical work.
PM2 removed the insulation and the Rebar handled the screws and cable cutting

Sent fra min FRD-L09 via Tapatalk
-
Such a great knife!

-
Yes it is

It will need sharpening after this challenge as the fine edge on it doesn't like copper cable
Sent fra min FRD-L09 via Tapatalk
-
I'm the same Cody. My SE blades don't get stropped, but I find that it cuts down on trips to the sharpener for my plain edge blades. I use the back of my leather belt for mine.
-
<u>DAY 12</u>
Morning/Afternoon/Evening (delete as appropriate)
The weather is still a bit oppressive here in the UK (London anyway) It's very humid and the UK (and me) aren't built for it ::)
So, with that in mind, it's just a pic' of the UKPK basking in the sun (with it's shades on)

-
-
-
Day 12

PM2 getting ready for mail duty. This was the first Spyderco I purchased myself and eventually hooked me into the brand. The compression lock, the generous choil, decent handle and proportions. The PM series are definitely my favorite within the Spyderco family.
-
@Nix said:
The Manix 2 is a cool knife. And Maxamet is supposed to be a hard wearing steel! My M2 is in S90V which has done well so far. I do like the M2, but the ergos of the PM2 suit me a tad better, as a result, I tend to carry a PM2 more often. Perhaps next Spydie challenge I'll go with the M2!
I am totally in the same boat, personal favorite is the PM series, but should really 'test' out the maxamet to see whether it is worth the premium.
@SurgeUk said:
That is a lovely looking knife

I had a quick look and discovered a great deal; ONLY £194,95 (was
£ 271,55) That's $255 US or $216 EU at the sale price :ahhh :ahhh :ahhhLink for those richer than I
https://www.knivesandtools.co.uk/en/pt/-spyderco-manix-2-maxamet-c101pgy2.htm
That's wild pricing.@Spartan19 said:
DAY 11Cooked up some flounder with the endura

Looks great!

-
@Barry Rowland said:
I wound up using the pliers on my Rebar when fixing my dog fence today, but the PM 2 did the zip tie cutting. Do you all strop your Spydie blades?All the time. I do that for almost all my blades, it really does make a difference and I find it easier to do quick touch up here and there, than to do a full-on sharpening session.
-
<u>BONUS PIC</u>
Spyder-Frog
I actually took this yesterday (day 11) but had to help a neighbour move some furniture and forgot to post it ::)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

We're not allowed nice toys in the UK 
