Deep in the Spydie Hole Challenge- August 2020
-
-
Day 15

PM3 attending coffee duty. I used to think PM2 probably was my favorite Spyderco, and that was true until PM3 came out. Now I'm undecided. :D
-
@Nix said:
Only...I used a Military....someone will need to see if a PM2 actually can cut up a chicken.....
I would love to give my PM2 a spin on a chicken, except Mrs. always know I am always up for no good in the kitchen and all my knives uses are only limited for either coconut chopping or package cutting.

-
Magnet mod to my small knife table for my edge pro, and a dose of the same treatment on my squeak as my urban got, to give it a nice sharp polished edge.




Kev, that's a great mod.
How well does it work for something like a SAK or a small slip joint? And any particular reason choosing this location for the magnets instead of right at the edge of the attachment? 
@Barry Rowland said:
Day 14: A gathering of Spyderco knives! We met up with Spartan 19 for his 23rd birthday... Happy Birthday Noah! He brought his Manix and I my PM2.@Spartan19 said:
DAY 14Unboxing my birthday present with the mighty manix
Happy B-day!
And how cool is celebrate B-day while father and son both carrying a Spydie in the same challenge!

New addition to my spydies, Paramilitary 2 dlc. Its big compared to my Urban and Squeak.
I just need my heinnie ukpk to arrive now


A really handsome PM2, and look at that background!

-
Comis! Noah is actually the one who introduced me to the wonderful world of Spyderco. He gave me the Endura 4 that I've used in this Challenge a couple of times. -
Day 15: Halfway through! The Endura and I cut a Pepsi bottle to scoop water for our plants. The serrated edge made it interesting, so I kept the cutting to the plain edge.

-
@comis said:
Kev, that's a great mod.
How well does it work for something like a SAK or a small slip joint? And any particular reason choosing this location for the magnets instead of right at the edge of the attachment? 
Thank you

Its pretty good, makes holding them easier. The magnets will hold it well, I just need to hold it to stop it slipping about when pressure is applied with the stones. I've put pics below of a 4 layer sak and a stockman with its smallest blade on the magnets, and a final pic for size comparison to a small blade on a sak.
I didn't go to the edge just because I wanted it to look stock. I used three 10mm x 10mm x 4mm magnets just superglued into a hollow I made with a burr on my dremel.




-
Day 15
Ladybug cut up some dog treats.
-
**Day 15
**Nothing so far for the Sage, but later it will be helping with some BBQ pulled pork


-
<u>DAY 15</u>
Nothing much doing in the Surge household today

Weather is rubbish and TV is worse ::)
Here's a glamour shot of something pointy with some other pointy things

-
@GearedForwards said:
**Day 15
**Nothing so far for the Sage, but later it will be helping with some BBQ pulled pork


Nice Spydie and as for the BBQ pulled pork
:ahhh :ahhh :ahhh -
-
Its pretty good, makes holding them easier. The magnets will hold it well, I just need to hold it to stop it slipping about when pressure is applied with the stones. I've put pics below of a 4 layer sak and a stockman with its smallest blade on the magnets, and a final pic for size comparison to a small blade on a sak.
I didn't go to the edge just because I wanted it to look stock. I used three 10mm x 10mm x 4mm magnets just superglued into a hollow I made with a burr on my dremel.




This all sounds like the work of the Devil (or the Dremel
) -
@Barry Rowland said:
Day 15: Halfway through! The Endura and I cut a Pepsi bottle to scoop water for our plants. The serrated edge made it interesting, so I kept the cutting to the plain edge.
I do like a serrated edge 
-
@Barry Rowland said:
Day 14: A gathering of Spyderco knives! We met up with Spartan 19 for his 23rd birthday... Happy Birthday Noah! He brought his Manix and I my PM2.
Love it

-
Its pretty good, makes holding them easier. The magnets will hold it well, I just need to hold it to stop it slipping about when pressure is applied with the stones. I've put pics below of a 4 layer sak and a stockman with its smallest blade on the magnets, and a final pic for size comparison to a small blade on a sak.
I didn't go to the edge just because I wanted it to look stock. I used three 10mm x 10mm x 4mm magnets just superglued into a hollow I made with a burr on my dremel.




Kev, thanks yet again for the pictures and writeup, that explain a lot.
What usually frustrates me a little about 'guided system' is the time it takes to find the optimal position of clamping/blade placement.
Especially if the distance between the blade and the pivot of the guided rod is short, as the stone/rod going further away from the centerline(imagine sharpening a longer blade), I find the sharpening angle would deviate faster, than if the blade were to be further away from the pivot.(the difference between a really tight arc vs a really, really large arc)
In my limited experience, the only way to keep a very consistent of bevel from tip to ricasso when using a guided rod system, is to readjust the blade accordingly during any sharpening session, so the part you are sharpening could remain somewhat perpendicular to the stone, while maintaining a constant distance from the pivot. And for any clamp system, that may mean constant clamping and re-champing as I move from stone to stone.
Hopefully, by having these strong magnets and easy visual guideline(just keep the edge exposed off the table), the edge pro will be easier to operate and more efficient when you need to adjust the position of the blade.
-
That's a nifty treat box, probably good to carry on the go.

@GearedForwards said:
**Day 15
**Nothing so far for the Sage, but later it will be helping with some BBQ pulled pork


Picture, or it didn't happen. :D
Nothing much doing in the Surge household today

Weather is rubbish and TV is worse ::)
Here's a glamour shot of something pointy with some other pointy things
Cool shot!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
