GEC Fixed Blades?
-
I don't dislike carbon at all. I'm intrigued for sure. The style is very attractive to me eye as well. 8)
-
Well I did it. My first GEC and a fixed blade :D. I decided to get the H30 which sits between what you have comis. I couldn't figure out if the H10 would be too small and the H40 IMO was larger than I was wanting.
Its a light knife. I really like the design and thinness of the blade. Its a good fit in my hand so I think the H10 might have been feeling like a 3 finger knife which is not a bad thing. I think this size will make a good all around day to day knife. I see what you mean about the snap rubbing the knife
. Its too bad they didn't solve that. While its not on the side with the etch its still not a good thing.I think now I'll have to see what the fuss is about regarding their folders. While its a nice knife I'm not over the moon. Its a fair price paid and I'm glad I didn't have to pay over $100.
I do need to take care of the edge, more like refine it. Its very sharp but the roughness is not something I like. I'll take it to my 1k whetstone and refine it then strop it.



-
Their fixed blades don't get much love. The main reason stated, from what I recall, was that they were expensive for what they are and that there were many other quality/interesting options, traditional, in fixed blades.
I have considered buying one but I usually end up buying a slipjoint from GEC instead.
Being GEC I expect it will serve you well.
Go stab something and chop some wood then :)
-
I'll pick up one of their slip joint offerings at some point. Its a fair price for what I'm sure will be a well used knife. Tomorrow once I square away the edge it'll go straight on my hip and put to use as the needs arise. I do like the style very much. I don't know much about their heat treat but I would imagine its good.
-
Well, remembering now, I do have one of their letter openers, technically a fixed blade, and it has served me well for 7 years - I think it was about $20 at the time
-
@Aloha said:
Well I did it. My first GEC and a fixed blade :D. I decided to get the H30 which sits between what you have comis. I couldn't figure out if the H10 would be too small and the H40 IMO was larger than I was wanting.Its a light knife. I really like the design and thinness of the blade. Its a good fit in my hand so I think the H10 might have been feeling like a 3 finger knife which is not a bad thing. I think this size will make a good all around day to day knife. I see what you mean about the snap rubbing the knife
. Its too bad they didn't solve that. While its not on the side with the etch its still not a good thing.I think now I'll have to see what the fuss is about regarding their folders. While its a nice knife I'm not over the moon. Its a fair price paid and I'm glad I didn't have to pay over $100.
I do need to take care of the edge, more like refine it. Its very sharp but the roughness is not something I like. I'll take it to my 1k whetstone and refine it then strop it.
Just read this, and looks like you are going to have fun with this! Do enjoy the new blade.
I do like the GEC traditional slip joints a lot, their workmanship is good, and fit and finish is great given the nature of natural material (save a few that are notorious for really strong pull). After seeing a few youtube videos about how they made them, I respect them even more and think of it as a way to support the traditional knife makers.
There is nothing wrong about modern slip joints utilizing synthetic material at all, but given the similar price range, some modern slip joints really does lack the 'soul' and the fit and finish is sub par.(for example, the Lionsteel Bestmade has really busy lines and nothing is flush on that knife).
-
Well after a little time with this blade I am happy with it. I've removed most of the grinding marks from edge. What can I say I like looking at knife bevels with a loop
.Its a slicer and feel good in hand. For some cutting the top guard is in the way for me. Its a nice simple traditional design which appeals to me a lot. The thin blade is also something I really like. I've carried it everyday since getting it mostly at home but I did take it out over the weekend. My go to work knife is a Jumpmaster or HEST both are great in that role. This knife was bought to carry at home for small chores around the house. It wasn't a great knife in my work role but thats ok.
Its developing patina rather quickly. I am careful to remove and replace the knife so the snap doesnt scratch the blade. This knife is a user but unneeded scratching is not cool.

-
Great that it’s working out. It will be patina’d up nicely in no time.
-
@Aloha said:
Well after a little time with this blade I am happy with it. I've removed most of the grinding marks from edge. What can I say I like looking at knife bevels with a loop
.Its a slicer and feel good in hand. For some cutting the top guard is in the way for me. Its a nice simple traditional design which appeals to me a lot. The thin blade is also something I really like. I've carried it everyday since getting it mostly at home but I did take it out over the weekend. My go to work knife is a Jumpmaster or HEST both are great in that role. This knife was bought to carry at home for small chores around the house. It wasn't a great knife in my work role but thats ok.
Its developing patina rather quickly. I am careful to remove and replace the knife so the snap doesnt scratch the blade. This knife is a user but unneeded scratching is not cool.
Very glad to see you are getting along well with this, the patina should look awesome in time. For the snap scratch, I am wondering maybe we should glued a piece of cloth over that area, so we won't have to worry about the scratch?
-
I very well may do that. I'll take a look at the sheath today and decide how to un stitch before I proceed.
-
Well I did what you suggested and opened the space up just enough to slide a strip of gorilla duct tape in and cover the snap. We'll see how long this "fix" will hold. I took a look at the stitching and it would not be terribly difficult to undo and put a proper solution together. I have the materials ( sinew, needle ) to perform the task. I figured I'd try this simple solution and see how it goes. I've actually used this method on another snap issue. That snap was a lot more accessible but it has held decently.
The picture is looking down into the sheath. Thanks comis for the suggestion



-
More tweaking to get the edge even more slicey means more carry time. Patina is really coming along. The Gorilla tape is holding very well.

-
-
Still liking my GEC fixie. Now its got a friend. I keep it busy in the kitchen and my meat cutting knife. Its got a well earned patina as a go to kitchen prep knife. The little guy is just photo bombing. :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Glad to see the gorilla tape holding up well. 
