The Nessmuk Challenge
-
Day 01:
Use of SAK--prying and prodding with cap lifter and hook working on chickenhouse door.
Use of fixed blade--some light cutting tasks.
Use of axe--nothing noted.

I've got a dentist's appointment tomorrow. While honestly, a bad idea, I'm really tempted to bring the Buck. However, by my rules, fixed blades in public are limited to neck-type knives, usually which had sheaths that either could, or were modded to be pocket carried.
-
@Top-Gear-24 said:
Brisa Nessmuk.Oooooh! Nice!
Sorry you will not be able to run the challenge! :(
(But feel free to throw a pick of that Nessmuk into the thread at any time. :D)
-
@cody6268 said:
I've got a dentist's appointment tomorrow. While honestly, a bad idea, I'm really tempted to bring the Buck. However, by my rules, fixed blades in public are limited to neck-type knives, usually which had sheaths that either could, or were modded to be pocket carried.Sounds like a good day for the SAK!
-
Day 01 (bonus material):
Used the folder to harvest some Chard from the garden. The chard struggled early on but has taken off in the last few weeks. The slim, sharp blade made quick work of cutting through the stalks and harvesting the leaves. I used the Farmer X because I wanted to cut specific leaves--a delicate touch was called for. Worked like a
Champ....Farmer.
Used the chard to make Palak Paneer (cheese in veggie sauce). The Nessmuk got used to prep the other ingredients. I kept trying to use the Nessmuk like a Chef's knife, so I kept thinking that it needed to be another 4" longer. Once I settled down and used it as a slicer, making pull cuts, it did great. No surprise, it's a great slicer. (And the broad flat blade is great for smashing garlic!)

-
Worked like a
Champ....Farmer. :D -
Day 2:
Even more parts


Sent fra min FRD-L09 via Tapatalk
-
@Alan K. said:
Day 01 Nessmuk Challenge 2020I had a bit of an upset stomach today, with excess acid, and Aloe is good for that. So, I used the Frost Little Black Talon to harvest and cut open an Aloe leaf and scrape out the jelly like substance which I then ate. It tastes kind of citrusy almost like a lemon without being sour. I'm already feeling better. I used the Tramontina machete as a cutting board and plate. I really like the Little Black Talon. It is a rare commodity, a $5 knife that actually holds an edge and works for what I want it for which is essentially a substitute for a folder.
@Sos24 said:
This challenge is shaping up to be really cool and even educational.@Alan - I knew about Aloe being useful topically for wounds and burns but was not aware helping with upset stomach
@Nix - I have heard of char cloth and how to make, but you mentioning denim has me wondering how it would work with my old 100% cotton Aquaflage uniforms. I’m also now wondering if it would work with the 100% cotton web belts.
Thanks Alan for the home remedy, like Sos24, I did have experience using it for burns and small cuts, but didn't know this until now. Cool tip!
I'm anticipating a trip or two out into the woods. This time of year, the weather can be quite variable. While we still have a few hot days forecast this week (and a 'Fire Weather" warning for today), the nights are becoming cool. And it's not unusual to have a snow storm. So, I'll be sure to have a fire kit in my bag when I go out. I always include a little char cloth in such a kit. Char cloth catches sparks from flint and steel, ferrorods, lighters, and matches. It makes a great little bit of tinder, it's light and takes up no space, and it's cheap to make.
I made burgers for lunch today. Since I had the grill going, I used the Farmer X's scissors to snip a few inches from the bottom of Mrs Nix's bathrobe (It's clean, all cotton, and I don't think she'll notice) and a patch out of one of her old pairs of jeans (no way she'll notice. She hasn't worn those for ages...). I've never tried making char cloth with denim, so I thought it was worth trying.

I use a small tin can with a screw on lid that has a small hole in the top. I cover the hole with tape to keep the contents dry, but remove the tape to make char cloth. I try to be careful not to overstuff the can, it's better to have the contents slightly loose while 'cooking'. The lid gets screwed on tight, then the can goes on the hot coals, with the hole side up to let out smoke. Once the can stops smoking....and a few minutes longer...and cooled off, I checked to be sure the all the cloth is well charred.
Looks like success!

Using the mini-ferro rod, I tossed a couple sparks on to a test piece. Looks like it works!

In general I prefer to use a loose knit fabric (all-cotton or linen). It's easier to fluff up and is better at catching sparks. But both the woven bathrobe material (thin) and denim (thicker) seemed to work well.

Oh, you can see that I've stuck the Farmer X on a lanyard. Since this challenge doesn't allow for replacement tools, I really don't want to loose this one!
Cool charred box, I actually much prefer the thicker material like the belt(which is rare to come by), since I always worried pulling it apart as soon as I catch the spark. I love char cloth mostly for playing with the flint and steel.
Btw, do anyone have issue with oxidized ferro rod? I found it to be a common problem once the ferro rod is used/scraped, but am slightly baffled since not every used ferro rod oxidated?
-
I've decided to make the time for the challenge, and get back to MTO! Life don't ask!
My first entry will be used to show off my little trio,
The Grohmann Jackknife will no doubt see the most use
For my fixed blade, I'm also going Grohmann, a #4 Russell belt knife
And lastly the Chopper, the Tramontina Machete has served me well over the years

Lovely to have you back! Always hear good things about the Grohmann and Tramontina, these are solid choices!
@CraftsmanSAK said:
Day 1
Here's my trio.
Case Rosewood 6265 Hunter, ESEE-6, and an Estwing 24A Sportsman's Axe.Sweet trio! I find the guard on Case pretty intriguing, especially since our last Traditional Dean Memorial challenge.
-
Day 2

Also, my Multiforce came!
Took a month and a half to come, so at least I'll get my express (
) shipping money back.

Question: Can I use my Multiforce can opener for my Can Opener thread? Or will that violate the Nessmuk rules?
I opened a can with the Rebar, and it is of course more than capable. The Multiforce will be used as a test/review. -
Great uses and pics guys! This will be an educational challenge me thinks

Sent fra min FRD-L09 via Tapatalk
-
Day 2

A lot of misbehaves today--I was playing with the JG5 and was making some feather with a really short block of dry wood. Totally forgotten how sharp was its spine, I managed to nick myself without knowing and was wondering why I see a red dot resting on the spine of knife half way thru.
Since the spine was pretty sharp, I tried to make feather/shavings on a semi-hard wood, but it just skipped around a lot without biting into the wood. -
Just happy to announce that we will be giving free magnets to everyone whom have signed up on or before July 4th, 2020 and finish this challenge in September 2020. If you are on the fence about joining, please do sign up now!

Spoiler:

So, since a few members had to drop out, could I have a magnet even though I signed up after July 4th? :ahhh
-
@comis said:
Btw, do anyone have issue with oxidized ferro rod? I found it to be a common problem once the ferro rod is used/scraped, but am slightly baffled since not every used ferro rod oxidated?For a long time I wore a ferro rod around my neck. Between getting bounced around and sweat, it oxidized fairly easily. While that isn't good, it's not a problem to scrape away the oxidation and then throw sparks.
However.....I ended up wrapping the ferrorod in duct tape to protect it. Now I have a bit of tape (possible tinder) and a protected ferrorod.

-
@ReamerPunch said:
So, since a few members had to drop out, could I have a magnet even though I signed up after July 4th? :ahhhSure! I think I have everyone participating covered.
Nice quote, only if I had read this ages ago before my stockpiling began...
@Nix said:
For a long time I wore a ferro rod around my neck. Between getting bounced around and sweat, it oxidized fairly easily. While that isn't good, it's not a problem to scrape away the oxidation and then throw sparks.However.....I ended up wrapping the ferrorod in duct tape to protect it. Now I have a bit of tape (possible tinder) and a protected ferrorod.

Thanks for the cool trick! On that note, I am wondering whether I should apply somekind of coating on ferro rod that comes with the knife(for example, Light my fire knife)...would beewax be good sealant for this job?
-
I'm anticipating a trip or two out into the woods. This time of year, the weather can be quite variable. While we still have a few hot days forecast this week (and a 'Fire Weather" warning for today), the nights are becoming cool. And it's not unusual to have a snow storm. So, I'll be sure to have a fire kit in my bag when I go out. I always include a little char cloth in such a kit. Char cloth catches sparks from flint and steel, ferrorods, lighters, and matches. It makes a great little bit of tinder, it's light and takes up no space, and it's cheap to make.
I made burgers for lunch today. Since I had the grill going, I used the Farmer X's scissors to snip a few inches from the bottom of Mrs Nix's bathrobe (It's clean, all cotton, and I don't think she'll notice) and a patch out of one of her old pairs of jeans (no way she'll notice. She hasn't worn those for ages...). I've never tried making char cloth with denim, so I thought it was worth trying.

I use a small tin can with a screw on lid that has a small hole in the top. I cover the hole with tape to keep the contents dry, but remove the tape to make char cloth. I try to be careful not to overstuff the can, it's better to have the contents slightly loose while 'cooking'. The lid gets screwed on tight, then the can goes on the hot coals, with the hole side up to let out smoke. Once the can stops smoking....and a few minutes longer...and cooled off, I checked to be sure the all the cloth is well charred.
Looks like success!

Using the mini-ferro rod, I tossed a couple sparks on to a test piece. Looks like it works!

In general I prefer to use a loose knit fabric (all-cotton or linen). It's easier to fluff up and is better at catching sparks. But both the woven bathrobe material (thin) and denim (thicker) seemed to work well.

Oh, you can see that I've stuck the Farmer X on a lanyard. Since this challenge doesn't allow for replacement tools, I really don't want to loose this one!
Im have to try that out myself, thanks for sharing the how-to Sir

...I might use a different source for the fabric though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

