The Nessmuk Challenge
-
Day 2

Also, my Multiforce came!
Took a month and a half to come, so at least I'll get my express (
) shipping money back.

Question: Can I use my Multiforce can opener for my Can Opener thread? Or will that violate the Nessmuk rules?
I opened a can with the Rebar, and it is of course more than capable. The Multiforce will be used as a test/review. -
Great uses and pics guys! This will be an educational challenge me thinks

Sent fra min FRD-L09 via Tapatalk
-
Day 2

A lot of misbehaves today--I was playing with the JG5 and was making some feather with a really short block of dry wood. Totally forgotten how sharp was its spine, I managed to nick myself without knowing and was wondering why I see a red dot resting on the spine of knife half way thru.
Since the spine was pretty sharp, I tried to make feather/shavings on a semi-hard wood, but it just skipped around a lot without biting into the wood. -
Just happy to announce that we will be giving free magnets to everyone whom have signed up on or before July 4th, 2020 and finish this challenge in September 2020. If you are on the fence about joining, please do sign up now!

Spoiler:

So, since a few members had to drop out, could I have a magnet even though I signed up after July 4th? :ahhh
-
@comis said:
Btw, do anyone have issue with oxidized ferro rod? I found it to be a common problem once the ferro rod is used/scraped, but am slightly baffled since not every used ferro rod oxidated?For a long time I wore a ferro rod around my neck. Between getting bounced around and sweat, it oxidized fairly easily. While that isn't good, it's not a problem to scrape away the oxidation and then throw sparks.
However.....I ended up wrapping the ferrorod in duct tape to protect it. Now I have a bit of tape (possible tinder) and a protected ferrorod.

-
@ReamerPunch said:
So, since a few members had to drop out, could I have a magnet even though I signed up after July 4th? :ahhhSure! I think I have everyone participating covered.
Nice quote, only if I had read this ages ago before my stockpiling began...
@Nix said:
For a long time I wore a ferro rod around my neck. Between getting bounced around and sweat, it oxidized fairly easily. While that isn't good, it's not a problem to scrape away the oxidation and then throw sparks.However.....I ended up wrapping the ferrorod in duct tape to protect it. Now I have a bit of tape (possible tinder) and a protected ferrorod.

Thanks for the cool trick! On that note, I am wondering whether I should apply somekind of coating on ferro rod that comes with the knife(for example, Light my fire knife)...would beewax be good sealant for this job?
-
I'm anticipating a trip or two out into the woods. This time of year, the weather can be quite variable. While we still have a few hot days forecast this week (and a 'Fire Weather" warning for today), the nights are becoming cool. And it's not unusual to have a snow storm. So, I'll be sure to have a fire kit in my bag when I go out. I always include a little char cloth in such a kit. Char cloth catches sparks from flint and steel, ferrorods, lighters, and matches. It makes a great little bit of tinder, it's light and takes up no space, and it's cheap to make.
I made burgers for lunch today. Since I had the grill going, I used the Farmer X's scissors to snip a few inches from the bottom of Mrs Nix's bathrobe (It's clean, all cotton, and I don't think she'll notice) and a patch out of one of her old pairs of jeans (no way she'll notice. She hasn't worn those for ages...). I've never tried making char cloth with denim, so I thought it was worth trying.

I use a small tin can with a screw on lid that has a small hole in the top. I cover the hole with tape to keep the contents dry, but remove the tape to make char cloth. I try to be careful not to overstuff the can, it's better to have the contents slightly loose while 'cooking'. The lid gets screwed on tight, then the can goes on the hot coals, with the hole side up to let out smoke. Once the can stops smoking....and a few minutes longer...and cooled off, I checked to be sure the all the cloth is well charred.
Looks like success!

Using the mini-ferro rod, I tossed a couple sparks on to a test piece. Looks like it works!

In general I prefer to use a loose knit fabric (all-cotton or linen). It's easier to fluff up and is better at catching sparks. But both the woven bathrobe material (thin) and denim (thicker) seemed to work well.

Oh, you can see that I've stuck the Farmer X on a lanyard. Since this challenge doesn't allow for replacement tools, I really don't want to loose this one!
Im have to try that out myself, thanks for sharing the how-to Sir

...I might use a different source for the fabric though

-
@Fuzzbucket said:
Classy!

-
-
@old Lefty said:
Day 1:
Some fast chopping. Not building a hut, but this might be the tool for it:

Sent from my iPhone using Tapatalk
Fast you say? :o
-
-
Use of SAK--prying and prodding with cap lifter and hook working on chickenhouse door.
Use of fixed blade--some light cutting tasks.
Use of axe--nothing noted.

I've got a dentist's appointment tomorrow. While honestly, a bad idea, I'm really tempted to bring the Buck. However, by my rules, fixed blades in public are limited to neck-type knives, usually which had sheaths that either could, or were modded to be pocket carried.
Nice trio Cody

-
Cheers Stitchy

Day 2 Nothing of note today

-
@comis said:
Sure! I think I have everyone participating covered.Nice quote, only if I had read this ages ago before my stockpiling began...
Thanks for the cool trick! On that note, I am wondering whether I should apply somekind of coating on ferro rod that comes with the knife(for example, Light my fire knife)...would beewax be good sealant for this job?
I think you should be fine with a light coat of beeswax

Sent fra min FRD-L09 via Tapatalk
-
- pic Borg!

- pic Borg!
-

A lot of misbehaves today--I was playing with the JG5 and was making some feather with a really short block of dry wood. Totally forgotten how sharp was its spine, I managed to nick myself without knowing and was wondering why I see a red dot resting on the spine of knife half way thru.
Since the spine was pretty sharp, I tried to make feather/shavings on a semi-hard wood, but it just skipped around a lot without biting into the wood.Nice fuzzy stick!

-
Day 02
Had to wake up Moose from his nap for package duty. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




