The Nessmuk Challenge
-
Can I use my Multiforce to open a can for my Can Opener Comparison thread? It's not that I can't use the Rebar. The Multiforce will be used as part of a test/review, which is independent of the challenge. Or will it violate the rules?

-
@ReamerPunch said:
Can I use my Multiforce to open a can for my Can Opener Comparison thread? It's not that I can't use the Rebar. The Multiforce will be used as part of a test/review, which is independent of the challenge. Or will it violate the rules?
I don't think you will be disqualified from the challenge if you do, as long as you put up a approved pic for the day

Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
I think you should be fine with a light coat of beeswax
Sent fra min FRD-L09 via Tapatalk
@Nix said:
Beeswax might help. Or you could use finger nail polish (Mrs Nix has some that I borrow. ;) ). I bet some simple spray paint would work, too!
Good point on the nail polish, I used to coat flashlight electronics with that to give it more water resistance. That should work well on the ferro rod I bet.
-

I heard the call of Nessmuk today and got out for a bit of a hike.
The area is still seeing wildfire smoke—either because of, or despite, the wind. You can see it is hazy in this shot, that is from the smoke. It wasn’t bad enough to put off a hike, however. :D

Smoke not withstanding, it was a nice day. Hot in the sun, cool in the shade. I was up in the hills, exploring a deer path, and the terrain was a bit challenging at times….

Which makes a hike more interesting. :D
I didn’t anticipate being out long or needing a shelter or fire, so the Kukri got left at home. The Vic Farmer X (FX from now on.) was carried, on a lanyard, in my pocket. The Nessmuk got stashed in my ‘bum bag’.

In Nessmuk’s <u>Woodcraft and Camping</u> he talks about a "ditty-bag" that he stashes in a "bullet pouch" or small haversack. His description makes it sound like a mountain man’s ‘possibles bag’, in which items were stored for anything possible. The bag also serves as a knife sheath.
An interesting collection!
He has a knife sheath sewn onto the back of the pouch to stash his “Nessmuk” sheath knife:
In addition to some extra fish hooks, and a small flask, he keeps some other useful items:
To me, Nessmuk’s ditty-bag and bullet pouch sound a bit like an EDC bag crossed with a survival kit.
I, too, favor carrying some kind of ‘possibles’ bag for bits of gear that might come in handy. The bag varies a bit with the weather and what I might want to have along. For most summer hikes, I’ve been using this Patagonia Blackhole Waist Pack:

It goes with me everywhere and, has become as constant a companion as a hat.
I figured that I would do a bag dump as Nessmuk did above. I’m glad I did, because I discovered a missing element!

The bandana was in my pocket. The rest of the stuff was in the bag, clockwise: headlamp, chapstick sitting on 1 gallon plastic bag, “Boo-boo pouch" with Boo-boo kit and mini-fire kit, diamond sharpener next to “piggin’ strings”, Nessmuk knife in sheath, more cord, match safe with compass, 1 pint water bag.
What I noticed that was missing: my SOL space blanket! (Which I found in a different bag and immediately replaced upon returning home!)
If you guys are interested in the contents of the fire kit or Boo-boo kit, I can do a separate post about those.
Nessmuk’s kit is obviously geared more for fishing. He seems to have been a passionate fisherman and his various bits and pieces seem to reflect that. He does carry a worrisome number of buttons….I think he should have learned to sew better.

So, do you guys carry a “ditty bag” or “EDC” pouch in the woods? What kind of ‘bits and pieces’ do you include? Would you consider adding knife pouch to your ‘possibles bag’?
Final shot after climbing up a local hill before heading home, hazy….

I really love the Northern atmosphere for hiking and outdoor activities, the perfect combination of big trees, drier and cooler weather are what I dream of often.
I have the exact sentiment when reading about this ditty bag, and I was thinking to myself he would have totally love the modern lightweight material. Sometimes I have a feeling 'altoid survival kit' might be overrated(no offense to anyone using them) since we confined ourselves to the size of a really small tin, and everything ends up being a compromise. Don't get me wrong, it's definitely way better than nothing, but a ditty bag like Nessmuk would be a lot more practical when stuffed with good, quality gears.
-
@CraftsmanSAK said:
Day 2
I'm hoping to stay in this, but between work and other obligations I might have to bail.
Tonight I realized that I hadn't adjusted my Fuji apple tree in a couple months that I was trying to fix an easterly tilt since early this spring. It seems to be doing well. I used my axe to put a new point on the spike and etch a ring for the paracord to go back around and the Estwing was the perfect hammer to knock it back into the ground. The Fuji seems to stay upright by itself now, so I'm going to start adding a little westerly tilt to counter the wind we have on this mountain top and then I'll see how it does on its own. I'm hoping by late fall this will be good to go on its own.Hope the tree will do fine in fall, and I too hope you could stay too!

@TazzieRob said:
I'm following along with this one, great couple of days so far
Ferro Rod preservation - keep it away from salt. A mate had one in a cooking kit and his salt container spilled, and the rod got almost eaten completely away. Salty humid air is probably going to be the worst conditions, so keeping dry is also going to help preservation.
I think that could very well be the case for my rotten ferro rod, it was in a container and there was some first aid/chemical stuff in the tin that might have reacted with the rod.
@ReamerPunch said:
**Day 3 **Made a couple of tent pegs. Easy enough to make. A tad too short for real use, but it's nice to practice your rudimentary carving. Also, the X5 did an excellent job as a hammer.


Those Fiskars Gerber axes are nice, near indestructible.

@RF52 said:
I don't think you will be disqualified from the challenge if you do, as long as you put up a approved pic for the day
Sent fra min FRD-L09 via Tapatalk
This, and I think so as long your main go-to tools everyday are your trio, I think it is fine.

-
Day 3

I got this shaver strop long ago, thinking I would be using it in place of a real leather strop out on the field. All was going well until I manage to 'nick' the strop with the edge and a small chunk of it just flew right off
...then I remembered why I always see people flip the blade around when they reach the end of the strop, besides stropping faster, it probably will prevent this kind of silly mistakes from happening. -
@ReamerPunch said:
Can I use my Multiforce to open a can for my Can Opener Comparison thread? It's not that I can't use the Rebar. The Multiforce will be used as part of a test/review, which is independent of the challenge. Or will it violate the rules?
No worries--that's a separate project an outside the scope of your normal daily life.

-
-
@ReamerPunch said:
Can I use my Multiforce to open a can for my Can Opener Comparison thread? It's not that I can't use the Rebar. The Multiforce will be used as part of a test/review, which is independent of the challenge. Or will it violate the rules?
Holy smokes. :ahhh
/post/2158648

-
@ReamerPunch said:
Holy smokes. :ahhh
/post/2158648

Looks like a real winner! :D
-
NOLS! They have a whole series of books that are great for reference, I once even took a wilderness first aid class with them, and I think it was pretty well put together. If you have a youngster in house and do have some interest in outdoor activities, I do think they could be a good source to learn from.
-
Day 3 Removing seal from oil can, i could have used any of the three but this was first to hand

-
I agree with you on that Borg! ☕. Great challenge everybody!
-
Day 03
Moose skinning a ebay brown today. :D
-
Day 03
I used the Frost Little Black Talon to cut up some sausage. This carry is much lighter than my usual edc which includes a Swiss Champ, but I'd forgotten how much it rattles when I walk.

-
Day 3:
My Granddad got the UTV stuck in mud, on the steep side of a field (not only on a steep incline, but facing uphill on a steep side of a mountain), not far from where I got it stuck last week, but this time, we weren't able to get it out on its own. I got it stuck worse--tires were filled with mud, and I ended up further down on the side of the incline, at a weird angle. I first tried pushing. That didn't work. I then used the Outdoorsman's saw to cut some sturdy pieces of wood from the stuff thrown in the scrap metal/brush hoping the tires would be able to use them as traction (like a redneck version of a purpose-built traction mat), and that didn't work. The Bobcat/Kubota dealer was to return the lawnmower today after fixing it, and they offered to bring a sizeable tracked Bobcat they kept around the shop and myself and two mechanics (one mechanic on the Bobcat, one mechanic doing the rigging, and myself watching out) from the shop were able to free it with the Bobcat T450. I think I'll buy some traction mats when I can to keep in the UTV.

I also used the hook to carry a bucket. Handy tool. I view the Outdoorsman as a pocketable SwissChamp. Yeah, you get stuck with a fish scaler, but look how expensive a Woodsman is! Due to the tobacco ad, it really makes these cheap. And, the ole' scaler makes a good ruler and general-purpose pokey thing.

-
Great use of the hook buddy!!

-
Day 3
Not a very exciting blade day, but the folder did see a bit of mail duty

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


