Oak scales
-
Jothra, didn’t realise it would be that easy to take the inlay out. I will have to do it gingerly though (I have the touch of a rhino at times!). Might go down that route and place the inlay on the scale and seal in with a clear varnish of some description. Need to shave down the scales and re-char as they are a bit thick in practice currently. but need to repair the belt sander first!
If it looks ok I’ll post on here when I’m done. Cheers!

Thanks gearedfirst!
-
@Roadrunn3r said:
Jothra, didn’t realise it would be that easy to take the inlay out. I will have to do it gingerly though (I have the touch of a rhino at times!). Might go down that route and place the inlay on the scale and seal in with a clear varnish of some description. Need to shave down the scales and re-char as they are a bit thick in practice currently. but need to repair the belt sander first!If it looks ok I’ll post on here when I’m done. Cheers!

Thanks gearedfirst!
I'm looking forward to seeing what you come up with. The scales look fantastic.
-
To get the Vic logo out of the scales - On the scales I have seen (the modern ones) there is a little hole through the plastic right under the middle of the cross (from the bottom)
You just put a pin or paperclip through that hole and pop it out.You can attach the logo to the wood just with a bit of superglue on the back then clamp it together to attach it - Ideally before you attach to the SAK - If you dig out Archerwin's blog on the net - He talks you through this (I think! - From memory)
-
Cheers for the tips, the logo came off easier than I thought... progress so far below. Nearly ready for a lacquer

-
That’s a nice job - lovely work

-
Thanks Rizio
quite chuffed with it. Might have a go at doing the same for a camper I got at the same time. but this time I plan on doing a solder inlay - saw a you tube vid that inspired me this mornIng -
Looking Good!!! 
-
Thanks hot rod!
Gave up on the solder but done a set for the camper too. Shame the scales only had the painted inlay.

-
They look really good, nice work!

-
Thanks sir... I’m now on the hunt for a Cheap sak I can liberate the Inlay from to finish The camper
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login