The Nessmuk Challenge
-
Day 07 (bonus material):
There is a frost warning for tonight. The FX got used to harvest a few tomatoes and my would-have-been prize Cucumbers.

Salad, anyone?

-
Nix you've had quite a day!
. I use to love being out in the woods while it was snowing. -
True!

-
Day 7: Proceeded to make a mess in the kitchen.....

-
Nix, what a great way to spend a day. That looked like a lot of fun, even if you did maybe, just a little, slightly get hypothermic. I've never hiked in the snow. We don't get that here. I have, however, found myself SAK deep in the swamp when it has been near 100 degrees F and nearly 100 % humidity, and I've maybe, just a little, slightly got a case of hyperthermia from it too. I don't think I had nearly as much fun as you on your dreary day hike though. Well done.

-
@Alan K. said:
Nix, what a great way to spend a day.Thanks, Alan. I did get a bit cold, and I was surprised that my hands became numb. I doubt I was truly hypothermic, although the recipe for that was certainly in place. I've been mildly hypothermic a couple times in the past, and have a bit of a sense for what that's like.
We've had a hot summer, it was 93ºF (34ºC) only a few days ago. I was feeling somewhat acclimated to the heat. So going from boiling to freezing in the space of a couple days probably left me a bit colder than if I'd been acclimated for snow! (I'm supposing.) Still, I'd rather be too cold than too hot, any day!
No matter what, it was a fun day outside.

-
Really great pics and uses, today. I’m loving following this challenge.
@Nix glad you were feeling better and no ills came of your adventure. Love that were able to in your hikes through pictures, but glad I don’t have to feel the cold.
-
Day 8
For my next trap project, I went with a snare. You need a tent peg, and a toggle with a 7 notch to catch onto the tent peg. Two pieces of cord are attached to the toggle. One goes from the toggle to a spring pole, the other goes from the toggle to the actual snare. I used two Y twigs to prop up the snare, and there you have it.


And the mail came!

An auger, a large ferro rod, and the tool with removable monster scissors.

-
It was a happy coincidence that I posted the Kephart quotation this morning. (I have a set of pre-made quotations for each day of the challenge, as I’m sure y’awl have guessed by now. ) Since Kephart’s subject was knots, I thought I’d get snaps of the various knots I used to fly the poncho.
My most often used knot was the Bowline. I can tie this blindfolded and half-frozen. Three of the four corners of the poncho got a line tied on with a Bowline.

The working ends of the two back stays got wrapped around a branch, then fed back through the poncho's grommet and tied of with a slippery half-hitch. This effectively provides a 2-1 advantage (like a trucker’s hitch.) and makes a nice secure line that can be re-tightened easily.
For no apparent reason, I decided to use what I call a ‘Slippery Knute Hitch’ on the fourth corner. Just seemed like the obvious knot at the time. There is probably a better, formal name for this knot, but it’s essentially a Knute hitch that is tied in a quick release fashion.

This knot is made by slipping a byte up through the grommet, then taking the working end, forming a second byte and feeding that through the first byte from an edge of the poncho. I don’t really trust this knot, but as long as the knot is well loaded, it holds. And it is very quick to release. It could be made a bit more secure by putting a toggle through the second byte and snugging the byte down on the toggle. I’ve done this in the past when paranoid that the wind might shake my Slippery Knute Hitch out.
I wanted the poncho to slant backwards over the log. To effect that, I tossed one corner line over a high branch, then secured it to a lower branch with a simple Clove hitch. The Clove hitch is one of the most useful knots I know. The Clove hitch can be made a bit more secure by adding an extra half-hitch to form a “Clove and a half”, but I haven’t really found that to be necessary.

The Clove hitch is another knot that is easy to loosen and re-tension, even while loaded.
The last line was wrapped around a tree using a Backhand Hitch (no snap, sorry), a great way to get some tension on a line and hold it while tying the line off. This time, I used a Slippery Taut-line Hitch to tie off the working end.

Another fantastic knot to know. It is easy to slide the Taut-line hitch forward for more tension on the line--to make the line “taut”--or backwards to loosen the line. A brilliant knot.
I could easily have used just Bowlines and Taut-line hitchs for all the corners and finishing knots, but sometimes it is just easier or more convenient to use a different knot. No right or wrong here; just options.
After setting up my fly, I set about making lunch.
Lunch!
But which of the trio to use for lunch prep?

The Kukri was tasked with opening my various packets. I stuck it in a log and used the edge to nick open my ingredients:

I heated up water on a small isobutane stove, then cooked up my noodles in the soup base. When they were soft, in went the tuna and some of Nix’s Trail Magic Hot Sauce[emoji769]. Once that was all hot and hot, out came the spork!

So my fish soup may not seem all that great to you, dear reader, but to a cold and shivering Nix it was a gourmet meal! And the hot liquid seemed to pump some life back into me.
By the way, that Platypus bottle in the above photo–since we talked about these the other day–is my oldest and still going strong. It must be 12 or 15 years old….maybe older. These things are tough.
The view from my “pop-up café”:

After lunch, the snow-rain subsided a bit. It changed to flurries or light snow. I packed up and headed for my target hill:

Up on top, I looked backwards. My lunch spot was lost in the snowy mist:

On the way back down, I spotted a few more deer. Bucks this time, and giving me a wary look:

By the time I got home, I was back to feeling fairly warm from climbing and hiking more, but a hot cup of tea was still mighty welcome!
Looks like an awesome day, even if a bit chilly

Sent fra min FRD-L09 via Tapatalk
-
Day 8:
Volvo trucks training rest of the week


Sent fra min FRD-L09 via Tapatalk
-
@Nix said:
Thanks, Alan. I did get a bit cold, and I was surprised that my hands became numb. I doubt I was truly hypothermic, although the recipe for that was certainly in place. I've been mildly hypothermic a couple times in the past, and have a bit of a sense for what that's like.We've had a hot summer, it was 93ºF (34ºC) only a few days ago. I was feeling somewhat acclimated to the heat. So going from boiling to freezing in the space of a couple days probably left me a bit colder than if I'd been acclimated for snow! (I'm supposing.) Still, I'd rather be too cold than too hot, any day!
No matter what, it was a fun day outside.

Nix, looks like a perfect day out, a bit adventurous but all looks well in the end! And thank you for all the pix, giving us an opportunity to join you on the hike! Though I was once a boy scout, I gonna admit I am totally suck in making knots and really need to re-learn the basics. This is a great refreshment course.

@ReamerPunch said:
Day 8For my next trap project, I went with a snare. You need a tent peg, and a toggle with a 7 notch to catch onto the tent peg. Two pieces of cord are attached to the toggle. One goes from the toggle to a spring pole, the other goes from the toggle to the actual snare. I used two Y twigs to prop up the snare, and there you have it.


And the mail came!

An auger, a large ferro rod, and the tool with removable monster scissors.

RP, love those big ferro rods, make life soooo much easier than using those tiny ones.

Volvo trucks training rest of the week

Sent fra min FRD-L09 via Tapatalk
Will it include a little bit off-roading? >:D

-
Day 8


JG5 helped with dinner prep, to cut off the fresh abalone from the shells for cleaning, then steam them back on the shells for presentation.
-
Great pics Jack and a nice hike to take us along on

-
@comis said:
Nix, looks like a perfect day out, a bit adventurous but all looks well in the end! And thank you for all the pix, giving us an opportunity to join you on the hike! Though I was once a boy scout, I gonna admit I am totally suck in making knots and really need to re-learn the basics. This is a great refreshment course.
RP, love those big ferro rods, make life soooo much easier than using those tiny ones.

Will it include a little bit off-roading? >:D

Have to disappoint you, it's only a diagnostics course [emoji53]
Sent fra min FRD-L09 via Tapatalk
-
@ReamerPunch said:
For my next trap project, I went with a snare.
nice job!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

No rules bending! 
