MP400 Owners Club
-
I was digging in my bike pack and found a MP400. So now I have two MP’s - a 600 and a 400.
Does have one broken tool that is next to the Phillips.
-
MP400 after a hard day of work

-
Recently I bought a MP400 brand new and I am very happy with this unit. Small enough not to weigh down my pockets, but robust enough to handle light duty to potentially medium duty tasks. Being a tool that can be relatively easy to open with one hand is very helpful in my opinion. In my opinion, is the best multi tool design and the only other design rivaling this is Sog's PowerLock's design.
While this would have been great to have a slot in the knife instead of a nail nick, I also much prefer the sheep foot design over the standard drop knife as well. If there is to be a trade off with the second variation, I'd call this an improvement. 420 high carbon steel is certainly an improvement over a standard utility knife blade, so I am fine with this steel. Similar to the MP600, you can use the Phllips driver as as a 1/4" bit driver if you have the bit adapter. For delicate packages and letters, I have found the bottle opener to work fairly decently as well.
What I appreciate about Gerber is that while some of the components of this tool are imported (Taiwan, India based on the packaging), this tool was assembled in Portland Organ with the knife and perhaps other components as well. While I am not going to use the sheath, not surprisingly this was made in China, but there is a large market for sheaths out there. While I own several multi tools; I have to say this is easily one of my favorites for every day carry.
-
Honestly, the sheath is really the only thing I could complain about. The 400 is a great M/T! -
Yeah I gave the sheath to a someone else, but I figured I wouldn't be keeping the sheath anyway. Now the sheath that came with my Center Drive Plus is definitely a keeper and one of my favorites. Proudly stamped made in USA and there is even room for 1/4 inch screwdriver bits, so that is a positive.
-
I agree... that's a sheath!!

-
Agreed, the Gerber 30-001603 and also the USA made Gerber 30-001222 are my favorite sheaths from them. Granted I do keep my Fiskars MP600 in a American Bench Craft sheath. This company uses thick rivets instead of stitching. Truly proud to also support a veteran owned family run company. Always a plus to be able to help the wonderful men and women that have served.
-
Quick question before I order my first MP400 and join this club: Is it possible to mod the saw holder from the MP600 into the 400‘s frame, and have the holder + attached saw fold into the handle? Or is there not enough space in the handle?

-
@SirVicaLot said:
Quick question before I order my first MP400 and join this club: Is it possible to mod the saw holder from the MP600 into the 400‘s frame, and have the holder + attached saw fold into the handle? Or is there not enough space in the handle?
I'm doing an eyeball side-by-side and I'm sorry to say I don't think it'll work. Almost certain it's a 1/4" too long for a start. Also I'm pretty sure the thickness of the holder means that the blade wouldn't be held near enough the side of the handle to give the head room to slide. So the holder itself should drop in OK but you couldn't store a saw blade in it.
Saw from a Diesel might be a better fit. :)
-
Darn it, was afraid of that :-[ Thank you for checking, Gareth!

Not sure if I should get one now. Without the saw holder it is only half the fun. Are the scissors in any way better than the ones of the 600’s?
-
@SirVicaLot said:
Darn it, was afraid of that :-[ Thank you for checking, Gareth!
Not sure if I should get one now. Without the saw holder it is only half the fun. Are the scissors in any way better than the ones of the 600’s?
Exactly the same scissors. In fact as far as I can remember all the other tools are identical.
-
Thanks again!

-
Not sure if I should get one now. Without the saw holder it is only half the fun.
In fact as far as I can remember all the other tools are identical.
You can always try ... if the blade does not fit, you can carry it in the sheath or your wallet, you may turn it back to OE state or, add a Diesel saw.

N+1, remember?
-
I thought about that too, and I could even make a leather sheath for the tool, that has a small insert for the saw blades.
The whole idea was to basically have the bladeless MP600 in a smaller package. In order to achieve that, I would have to get like 2 MP’s: A 400 for the file and a 600 for the saw holder and the scissors. Then combine it into one. I might do that if I can find cheap donors. Maybe ones with damaged tools that I don’t need

-
That's a good idea there... a Compact Bladeless! An MP600 file will work fine in an MP400, and I think that the 400 already has scissors so, it will be a matter of replacing the combo blade and deciding what to sacrifice between the flat drivers and can opener.

-
I would remove the can opener. Never needed it and I have always a SAK on me anyway. Also hate to carry tools twice :D
-
My old knifeless 400 mod. No saw holder sadly but I crammed in everything else. :D

-
That's one nice mod'ed tool there, Gareth!
I like A LOT that awl; the lanyard ring, priceless (from Rebar/ST300?). And to top it off, legal almost everywhere!!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login