What did you use your Sak on today?
-
@alexanderre said:
That’s the trick I should bookmark [emoji1303]And it actually worked perfectly!
-
Pool sweeper went on fritz. I had left my thrift store Explorer with the broken scale on the fire ring by the pool earlier to dry out after giving it a second bath. Took the old Explorer in the pool. Third bath. In Line Phillips handled all the screws needing disassembly for diagnosis without me having to leave the pool. Then I sat on the pool steps and unstuck an obstruction in the passenger side gear housing. Then reassembled. Then took Sweep to patio table for tread replacement, because that’s where I had left them yesterday. Then reconnected sweep. Then had lemonade, because that’s what you drink, when life supplies lemons. Then decided this old Explorer is now my dedicated pool knife as is!!! I owe it a good home—mine. New scales? It don’t need no stinking new scales!!! Will start wearing my board shorts with pocket and carry the Explorer in the pool. We will see how long it takes for pool water to eat cellodon.

-
I fished out an old opened and barely used bottle of Glenlivet Nadurra (do prefer my 'livet in standard 12 guise or sometimes the archive 21 so this hasn't been touched in quite some time) and the cork broke in half like they sometimes do.
The corkscrew of SC was used in order to get half of cork out. Unfortunately the cork was so rotten than I ended up pushing most of it into the bottle.
Reckon the remaining 1/4 of the cork that remained will not not stop the whisky from vaporing for very long so I might be drinking more Nadurra in the near future ;)
Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
The wastage of any Livet is a tragedy of Shakespearean proportion. And the Scottish side of my clan might wage war over it.
-
Alexanderre
You have flung me into the abyss of analysis paralysis. I had almost resolved to buy a work champ, and now this logic of greater reach with Cybertool grips me.
-
@SgtTowser said:
AlexanderreYou have flung me into the abyss of analysis paralysis. I had almost resolved to buy a work champ, and now this logic of greater reach with Cybertool grips me.
Oops [emoji51] Though it’s all up to your needs - for me Cybertool has less reach that a slim Phillips on a Work Champ - I need it to be slim and get into tight places. If width and depth of the screw hole is not important to you - get a Cybertool [emoji1303]
(Though you might regret it because Work Champ has a larger blade which is also locking and so on [emoji23])
-
@alexanderre said:
Oops [emoji51] Though it’s all up to your needs - for me Cybertool has less reach that a slim Phillips on a Work Champ - I need it to be slim and get into tight places. If width and depth of the screw hole is not important to you - get a Cybertool [emoji1303](Though you might regret it because Work Champ has a larger blade which is also locking and so on [emoji23])
Is it the socket for the bit itself that is too wide? It appears long enough.

-
@ElevenBlade said:
Is it the socket for the bit itself that is too wide? It appears long enough.
Exactly
-
Whoa, don’t even know where to start [emoji23]
So I’m 33 today and my lady brought me this amazing Dremel 4300 as a gift - wanted it for years but just postponed it for some reason. Also I ordered this awesome Workstation for it to be even more useful and versatile

Luckily one of the laundry hangers broke at the balcony so I used my new Dremel to fix it. In order to do so I decided to drill a hole in a broken part and fasten it with a zip tie in addition to glueing. Here comes Work Champ - couldn’t pull the drill bit out and even cut two fingers trying without the pliers


Later that day I also finally got myself a new set of furniture to comfortably work from home - should have done so 6 months ago, but better late than never [emoji23]
Used Phillips a lot again in addition to the knife for unpacking parts and putting it all together


Now working from home feels like a pure joy [emoji2956]
P.S.: and despite the fact I don’t drink alcohol at all I had a chance to use a corkscrew on purpose for the first time [emoji23]

-
Looking like a GREAT DAY!!! -
Happy b-day mate!
Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
@alexanderre said:
Whoa, don’t even know where to start
So I’m 33 today and my lady brought me this amazing Dremel 4300 as a gift - wanted it for years but just postponed it for some reason. Also I ordered this awesome Workstation for it to be even more useful and versatile

Luckily one of the laundry hangers broke at the balcony so I used my new Dremel to fix it. In order to do so I decided to drill a hole in a broken part and fasten it with a zip tie in addition to glueing. Here comes Work Champ - couldn’t pull the drill bit out and even cut two fingers trying without the pliers


Later that day I also finally got myself a new set of furniture to comfortably work from home - should have done so 6 months ago, but better late than never

Used Phillips a lot again in addition to the knife for unpacking parts and putting it all together


Now working from home feels like a pure joy

P.S.: and despite the fact I don’t drink alcohol at all I had a chance to use a corkscrew on purpose for the first time


I am in awe of your uses here Alexanderre

I can barely tie my shoes without a grown-up to help :ahhh
Also, Happy birthday

-
Beater Explorer redeploys from in pool robot sweeper repair to....
Zucchini harvester!!!
SurgeUK distillation...
Blade on stem.
Slicing cut.
Repeat.
Note: the awesome thing here is how I got it to do it without touching the knife!


-
Happy Birthday Alexanderre! That's a cool dremel/drill press, I've never seen one like that. And great usage!
So far today, I've used my Camper's saw to stir my coffee and the small screw driver to pry adhesive off of a wall.
-
...office stuff...
-
@PeaceInOurTime said:
Happy Birthday Alexanderre! That's a cool dremel/drill press, I've never seen one like that. And great usage!So far today, I've used my Camper's saw to stir my coffee and the small screw driver to pry adhesive off of a wall.
Thanks a lot and nice use [emoji1317][emoji1303]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
