The Dremel (or clone ) Owners Club
-
Thanks!

-
300 series. Basically the cheapest decent one you can get. This is almost all of my accessories minus the sanding head. That somehow ended up getting misplaced. I found it beside where the case was laying.
Case (and the silver collets) did not come with it. It went to an older model my Dad had. He broke the handle off the case, and threw the case in the back of the farm shop. The small plastic box the 300 came with to hold the tools it came with did nothing to store the accessories. Especially given how many I had from older Dremels. Besides, I couldn't store the Dremel--for years I used the packaging (and my grandparents still do, with their identical model) The thin liners in the accessory set cases are useless and you have to put the blisters back on the top of them to keep their contents from getting lost. This one has room for everything in it.



A fuse box works great to hold my cutting heads--except the diamond one (which is much larger diameter). I lost my wrench, AGAIN!. Had to use the pliers of my Surge and a small screwdriver to put the cutting blade in the shaft, and to insert the whole tool into the Dremel and lock the chuck.
-
Dremel club apprentice reporting

Bought me a Dremel recently. Should have bought one years ago, now that I have it I can't imagine how I survived without it all that time


-
Just wandering upon this thread, what a clever shield this is!
I didn't know how fragile some of the dremel disk until once broken and exploded. Lucky I was wearing eye protection, but still freaky me out a little.@glenfiddich1983 said:
Dremel club apprentice reporting
Bought me a Dremel recently. Should have bought one years ago, now that I have it I can't imagine how I survived without it all that time


Great setup, still love that work bench!

-
Look what my lady got me for my 33rd birthday [emoji3060]

I immediately got myself that drill press workstation stand for it cause it takes the already incredible device to purely magical heights

Tried it on a few little things already and man that combo works magic [emoji2956] [emoji120]
-
Sweet ! and happy Birthday !!!!!!
-
-
@alexanderre said:
Look what my lady got me for my 33rd birthday [emoji3060]

I immediately got myself that drill press workstation stand for it cause it takes the already incredible device to purely magical heights

Tried it on a few little things already and man that combo works magic [emoji2956] [emoji120]

And happy birthday!
-
-
@PitCarver said:
Never realized that there was a Dremal club here. Got my first many, many years ago.
I certainly wish I could outfit a shop with all the goodies that they've come out with over the years.I so could use a mini shop, I have one of their carry cases with a vice but to have like a mini shop outfitted with mini tools would be great! Before we moved and I didn’t have any room, all I had was a mini shed I made a special bench simple 4ft x 2ft, but it had a square cut out in the middle, and it had special pieces that excepted diff hand tools, like a circular saw, it then mounted into the bench and turned it into a table saw, same with a jig saw, router, and a belt sander, one other unique thing I did was the wiring for it, I put a 3way on the front and the outlet on the back, also a foot peddle so power came in the 3way, fed the top outlet, if you turned it off which you didn’t it flipped down and just fed the foot switch which felt the lower outlet, of course I put a slap emergency off before anything, there’s something similar like at the beginning of this subject that I posted,,
JR -
-
Yeah those kits are nice. I like the bottle guard a lot and will be making one for myself as well. Those disks can be shrapnel. I always wear hand and eye protection as I've had one break off and scare me.
-
Yeah those bottle guards can be a eye saver!
JR -
I received my Fliks today.
The one I opened had a couple of issues. The lock tab nubs had very sharp edges, and hurt my fingers to unlock tools, because the lock tab springs are ridiculously strong. So I used the Dremel to chamfer the edges a little. Now I can push them with no pain.
I also loosened the pivots, and used some WD40 to get the blades to actually open with one hand.
-
-
-
Nice setup
,, I’d say it’s been a while on this subject, heck none of my pics are even up, here’s one of what I found for my setup,
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


