Been doing some work in the Wiki
-
Hey ET
Thank you for the very kind words - It really is appreciated - As it is quite a lot of work - Which surprisingly seems never ending.....
There are always new versions, variations coming out, missing series, LEs etc and updates and corrections to make.
Nick4 Has been a great help in recent years on this - And deserves a special call out!Thanks also for the observations on the Cadets - Here is what I have done:
Re the Five Colours: I have taken all the detail out of the regular Cadet page - and all the detail is now in the Five colour page - Most of which was there already - so duplicated which was not good.
I have also reformatted the Five Colour page to make it more user-friendly (I had never seen that page before!!)
Re the 20xx Cadet LEs - I have not added the 2020 colour
;) - And have taken away all the other 20xx details

Hopefully this is OK - As they are already in the 20xx Alox page - And there is a link to that page from the Cadet page
That way we only have one page to update each year !! :D
Re **the Cadet II **- A drop point version photo of the more recent old Cadet would be fab - I will send you a PM with an email address to send it to
Now I was going to save this until my editor's **Major Update No. 5 **(see earlier posts) - However seeing as we are on Cadets and Cadet IIs - I will mention it now.
LeaF and I had a chat and we were thinking of merging the Cadet and Cadet II pages
Why ? ???
Well for starters the Cadet II came ***before ***the Cadet which is highly confusing
and really they are both Cadets and the current Cadet is just an evolution of the original Cadet!We would merge all the Cadet II info into the Cadet page and explain a little more about the evolution (most of which is there already) - So we would just have one page that covered the Cadet.
Of course we would still explain the Cadet I and Cadet II etymology
I (we) think it would be in improvement and clearer for our usersWhat do you think ET and SAK Knights ? ???
-
Thanks very much Huntsman can only imagine the work, I’ve looked after sites before but nothing with the complexity of the Wiki

Definitely didn’t expect to see the update same day as mentioned, that’s service

All the changes you’ve done and have suggested make perfect sense to me and think a really good plan, it will definitely make the lineage clearer

I’ll be genuinely honoured to have a picture of one of my SAK’s on there and very pleased to be able to contribute

Also I shall henceforth be known as ET
:D
ET
Sent from my iPhone using Tapatalk
-
@Huntsman said:
That's absolutely the right way Zanza - Thank you
- It's updated (with a thanks to you in the History!!) 
Impressive work Huntsman, keep it up

(and I'm more than happy to have put such a small helpful brick in the wiki)Oh and BTW, I quote here some thing I've posted elsewhere that you maybe missed... ;)
@Zanza said:
@ Huntsman: here are pics of the Swiss Identity Huntsman for the wiki as you requested ;)BTW I can't figure how to create a user in the wiki, it asks for admin's autorisation or something


-
@Huntsman said:
Lovely new Swiss Spirit page Nick - Thanks ... *and for all the piccies and related updates !! *
My pleasure.

But you do a lot more work.
-
Unfortunately, for some strange reason, I can't add images to the SAKWiki catalog gallery.

So I'll just leave it here: a page from the Victorinox 1970s (?) catalog, the Garden Knives line.

-
Cause catalog galleries aren't image galleries, they are file galleries needed to store uploaded pdf catalogs and similar files. And to prevent uploads of unwanted content, maleware and such, (yes, we had that before) access to the file galleries is limited to admins only.
Currently still active admins are Huntsman, Reinier and yours truly
so if you need something uploaded there, let us know.Is this a catalog page you have or have you downloaded it? Do you have a scanner so we get a better representation of the page than the one taken with a camera?
Also, I'll have to check when I get to my desktop, but I think we might have that one in the wiki already.

-
enki_ck, thank you for the explanation!
@enki_ck said:
Is this a catalog page you have or have you downloaded it? Do you have a scanner so we get a better representation of the page than the one taken with a camera?Unfortunately, now I have this poor quality photo only. :( But I will try to get the whole catalog.
-
Good job Nick!
-
Three layers instead of four? Or did you make a huge mistake? :)
-
Dear Knights,
Just created Delémont Evolution S54 and Delémont Evolution S557 pages.
Could someone with native English check them for possible mistakes, please?
BTW, it's seems to me, there is a wrong identifier for the Delémont Evolution S557 model in the beautiful poster by Sir NeleDo (and Evolution Grip models are missing).

-
Just created Delémont Evolution S54 and Delémont Evolution S557 pages.
Could someone with native English check them for possible mistakes, please?
BTW, it's seems to me, there is a wrong identifier for the Delémont Evolution S557 model in the beautiful poster by Sir NeleDo (and Evolution Grip models are missing).

You're right about the identifier for Evo S557 (it should end in "SE"), I accidentally used EvoWood S557's twice
I'll correct it as fast as possible...
As for Evolution Grip models, they are not "missing"... They are excluded as I used only basic models (not scales variations except for wood) in almost all of my posters.
-
Delemont 85mm poster with corrected Evolution S557 identifier


-
HI all,
I was checking out the 74mm pages on the Wiki and I noticed that the 75mm models are listed below the 74mm SAKs. How about we move them to a dedicated 75mm page? I know it's basically a discontinued product line but still. They have noting in common with the double sided/floating spring frame (Executive, Ambassador, etc.). This has probably been discussed before :)
Also, on the Accountant page, none of the models with scissors are mentioned. Should they be, being discontinued decades ago?
The old Accountant-style SAKs in 84mmm are not mentioned on the 84mm page. Should we add them?
I would like to see more old identifiers (like 656 aCr+ for a cellidor "Executive" with shield & cross and T&T) mentioned on the pages of the modern equivalent models. What do you think?
-
@NeleDo said:
You're right about the identifier for Evo S557 (it should end in "SE"), I accidentally used EvoWood S557's twice
I'll correct it as fast as possible...
As for Evolution Grip models, they are not "missing"... They are excluded as I used only basic models (not scales variations except for wood) in almost all of my posters.
Ok!

@NeleDo said:
Delemont 85mm poster with corrected Evolution S557 identifier
Thank you very much!

@Reinier said:
I was checking out the 74mm pages on the Wiki and I noticed that the 75mm models are listed below the 74mm SAKs. How about we move them to a dedicated 75mm page? I know it's basically a discontinued product line but still. They have noting in common with the double sided/floating spring frame (Executive, Ambassador, etc.). This has probably been discussed before :)That sounds reasonable to me.
@Reinier said:
Also, on the Accountant page, none of the models with scissors are mentioned. Should they be, being discontinued decades ago?IMHO, should.
@Reinier said:
The old Accountant-style SAKs in 84mmm are not mentioned on the 84mm page. Should we add them?IMHO, yes.
@Reinier said:
I would like to see more old identifiers (like 656 aCr+ for a cellidor "Executive" with shield & cross and T&T) mentioned on the pages of the modern equivalent models. What do you think?It would be great!
-
Thanks Nick.
Perhaps we could split the 84mm page into three distinct pages? Since there are three different versions of the 84mm frame (regular, slim and lobster, right?).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login