What did you use your Sak on today?
-
Used tweezers on Vic Champ plus to dig out ocean sand and grit from an old Luminox 3000/3900 watch I picked up for $10 in a Thrift Store, installed a battery in, and now will dedicate to water duty. The tritium tubes are still readable at night. Never felt Lumies were worth the price new, but at $10 plus a battery why not?

-
I had to do something I've never done before, lay carpet, but see, I’ve laid your normal 12ft wide carpet a bunch of time this time they were like 2ft x 2ft squares that even had a strip of tape on the back,
Anyway I get the whole room done in about an hour and half, and the last piece is missing a mini corner so odd shaped, so I had to take a scrap piece and use my PioneerX’s scissors and cut the shape and stuck it to the floor!
JR -
Carpet is tough material for any blade. How did the scissors hold up?
-
@PeaceInOurTime said:
Carpet is tough material for any blade. How did the scissors hold up?It was a very thin carpet, it didn’t cut in one cut, it took a few cuts to work around a few corners but it worked!
JR -
Used my Executive to replace the batteries in my son's talking/singing toy animal. It's a hilarious donkey which sounds drunk (the toy, not my son).

-

...and they grow sooo fast!!!
-
I just put up a whiteboard on the kitchen wall. Cybertool did almost all the work: marking the holes, inserting the plugs, screwing in the screws.
Hole drilling in concrete was not done using a SAK. For obvious reasons.

-
@Reinier said:
I just put up a whiteboard on the kitchen wall. Cybertool did almost all the work: marking the holes, inserting the plugs, screwing in the screws.Hole drilling in concrete was not done using a SAK. For obvious reasons.
Wut? There's no awl in Cybertool??
;)Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
It's green actually and the pic is very bad!
But black SAKs are awesome, true.

-
:D
-
Discovered stains on my almost new minichamp alox. It was both on the ruler/screwdriver and also on the cuticle pusher. Removed it with tin foil - now there're only two small pits remaining and. no rust.

-
That’s a good tip!

Had to google to understand...A simple and inexpensive way to remove rust from and polish chrome surfaces by hand is to rub it with aluminum foil dipped in salt water. This process yields two advantages. First, since the aluminum foil is softer than steel, it will not scratch the surface. And second, a by-product of the process produces a fine metal polishing compound that smoothes the chrome surface to a bright shine.
How Does this Work?
Rust is basically oxidized metal. As heat is generated by the friction of rubbing the aluminum foil on the chrome, a portion of the aluminum will also oxidize to produce aluminum oxide. Aluminum has a higher reduction potential (a tendency take on electrons and in the process reduce or break itself down) than the chrome, and will therefore leech oxygen atoms away from any rust on the chrome surface, which changes the chemical properties of the rust and breaks it down -
@Max Stone said:
That’s a good tip!
Had to google to understand...A simple and inexpensive way to remove rust from and polish chrome surfaces by hand is to rub it with aluminum foil dipped in salt water. This process yields two advantages. First, since the aluminum foil is softer than steel, it will not scratch the surface. And second, a by-product of the process produces a fine metal polishing compound that smoothes the chrome surface to a bright shine.
How Does this Work?
Rust is basically oxidized metal. As heat is generated by the friction of rubbing the aluminum foil on the chrome, a portion of the aluminum will also oxidize to produce aluminum oxide. Aluminum has a higher reduction potential (a tendency take on electrons and in the process reduce or break itself down) than the chrome, and will therefore leech oxygen atoms away from any rust on the chrome surface, which changes the chemical properties of the rust and breaks it downGreat explanation Max, thanks!


Sent from my SM-T387V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login