NOT pleased with leatherman
-
@jzmtl said:
I think you are expecting too much especially with your last point. It's a tool, not a jewelry.I can see your point, jzmtl, but I would be a little dissapointed too... (Being his first MT and all....)
After all he did some reading and ask for advice on which MT to choose, so if there's a crack in the plier, lack of finish on the blade, along with file-rubbing,
then the scrathes could just be "the last nail in the coffin".. :-
My XTI has the file-rubbing too, so I close it carefully.. ;)
(+1 on the spirit finish..
) -
Sometimes I feel prices go up on some things and quality seems to go down.
My life with tools was a lot simpler once upon a time. I remember back in the mid 90's buying my first multi. It was a Supertool. All I did was admired it's heft and pulled out each of the tools to see what I came with it and folded it back up, sheathed it, and that was that until it was needed.
Well... things change when you join forums. ;) you start to inspect things a little more closely. Is it riveted or (God Bless) a torx for adjustment? Is there a bit of play in that blade? :o Forge, cast, what year is stamped on handle? Honestly it bothers me too that my file rubs on the aluminum handle of my alx, and that it sometimes the pliers bind when closing so I have to re-open to get it to close.
Anyhow, sometimes I yearn for times gone by when I really didn't give a s**t. :Dsean
-
@Sean said:
Anyhow, sometimes I yearn for times gone by when I really didn't give a s**t. :D
seanPure poetry... :D
I did alot of reading on the SURGE! before it was delivered, and I opened the box with trembling hands,
in case it (God forbid) should RATTLE... :o
But it didn't... ;)(Let's just say: SURGE! one more time...
) -
@cliosguy said:
got it! that(first photo) came from the stoppers inside the handle that prevent the plier head from catching with the inside blades :-\I first thought that would be impossible because it seemed longer than the distance the pliers move inside the tool, but I just retraced the path and it seems te make sense. I now have some better light available and it is not a crack. (it wasn't a casting inperfection either). This still seems just a bit like bad design though, such noticable wear from folding? Maybe I should start designing these things ;)
It is not a showpiece to me at all, but things do add up. I mean, it's ok if it shows wear from regular usage, and I can sand the parts down myself, but I'd like it to be flawless when new :)
I decided to keep it because the damage is not structural, but still think they could do better. Maybe they should start manufacturing them in China or Taiwan, cheaper labour and superior fit and finish ;)
-
I'd be a bit disappointed too I think. It's a shame you have a cruddy example of what is a good tool. :(
-
I think you are expecting too much especially with your last point. It's a tool, not a jewelry.
I can see your point, jzmtl, but I would be a little dissapointed too... (Being his first MT and all....)
After all he did some reading and ask for advice on which MT to choose, so if there's a crack in the plier, lack of finish on the blade, along with file-rubbing,
then the scrathes could just be "the last nail in the coffin".. :-
My XTI has the file-rubbing too, so I close it carefully.. ;)
(+1 on the spirit finish..
)That's why I don't buy "luxury" model that's otherwise identical to the cheaper cousin. :D
-
-
I think you are expecting too much especially with your last point. It's a tool, not a jewelry.
I can see your point, jzmtl, but I would be a little dissapointed too... (Being his first MT and all....)
After all he did some reading and ask for advice on which MT to choose, so if there's a crack in the plier, lack of finish on the blade, along with file-rubbing,
then the scrathes could just be "the last nail in the coffin".. :-
My XTI has the file-rubbing too, so I close it carefully.. ;)
(+1 on the spirit finish..
)That's why I don't buy "luxury" model that's otherwise identical to the cheaper cousin. :D
Rational thinking really is the way to go in life, but where's the fun in that? :D
Besides, have you seen the shiny titanium handles that save you a whopping 1-10 grams, it feels like a feather in your pocket! :P
And further, the CX models of the Freestyle and Skeletool, with ultralight-yet-strong space-age carbon fiber insert. :D The blocky weave patteren bringing back all those 80's memories!
Don't even get me started on the featured Diamond-Like-Coating, it's like... ...DIAMOND like man! :ahhhYou know you want it :D
got it! that(first photo) came from the stoppers inside the handle that prevent the plier head from catching with the inside blades :-\
Maybe I should start designing these things ;)
Be sure to send me a prototype for testing.... :D :D
You'll get the first one, I'll get your forum nickname engraved in it ;)
-
This reminds me an awful lot of my first experience with the Charge... :ahhh
Def
-
-
I think the rough edges on the thumb grooves is very common in all leatherman products.
Vic Spirit or swisstool RS are more refind in the fit & finish departments. The Wave is another good alternative, I sent my Charge back due to similar issues, and dont plan on buying one untill major changes are made.
-
That's a shame. of all the things you've listed it's the poor finishing on the titanium that would really bug me. The scratches will, in time, be lost amongst the ones you'll add as a working tool. The rough edges can be cleaned up. But I agree that it's all stuff that you shouldn't have to live with in a brand new tool. :-\
-
With the exception of the cracked plier I have most of these same issues on all my Charges, it's something I look past because the Charge/Wave is still the best tool for my needs.
The fit and finish on my swisstool spirit is clearly superior to my charges, but the charges are still more useful to me.
It really is a shame though. I returned a TTi because the depth of the textured indented portion was inconsistent and clearly wrong. The leatherman charge lettering was way wider on one scale than the other.
I have a Swiss spirit for trade if you want to get tired of your charge TTi :)
-
@Crouton said:
With the exception of the cracked plier I have most of these same issues on all my Charges, it's something I look past because the Charge/Wave is still the best tool for my needs.The fit and finish on my swisstool spirit is clearly superior to my charges, but the charges are still more useful to me.
It really is a shame though. I returned a TTi because the depth of the textured indented portion was inconsistent and clearly wrong. The leatherman charge lettering was way wider on one scale than the other.
I have a Swiss spirit for trade if you want to get tired of your charge TTi :)
What about that ratchet? Bet your not getting rid of that huh Jeff? :D
-
What about that ratchet? Bet your not getting rid of that huh Jeff? :D
[/quote]I'd actually have a hard time letting go of that swisstool ratchet and bit kit, what a cool piece of kit.
-
IMO, that's the best part of a Swiss Tool is the ratchet set. :D
-
oK. My latest tool is a TTI. It's been my EDC for 3 months now. It is the best multi-tool I've ever owned and I use the crap out of mine. I'll bet on average I use my multi for 10-20 different tasks a day.
Movement in the blades or unreliable lock up would be an issue for me. I think we've established that there is not a crack in the pliers and I'll bet if you give the file a good shove in the other direction it wont rub any more.
I'm a Tool & Die maker who has been hard on Leathermans since there was Leathermans. For the kind of work I do, a Charge TTI is the tops. ( although I could still recommend improvements).
You've got a killer tool there. now go out and try to break it.
It's not a problem until it's a problem.
the beer is talking to some degree tonight. this is probably just my opinion and not Gospel... can't tell right now.)
Dave
-
Makes sense to me ratslash, beer or no beer!
The Charge above clearly has a few issues, but I've never really understood what "fit and finish" (my most hated phrase on here) has to do with tools. Sure, if things don't fit properly and the tool doesn't perform as a result, then I can see it's a problem. But, as someone already said, it's a tool, not jewellery.
That said, if you're not happy, the warranty would take care of you.
Just a thought, the hole on the OH opening blade is (I think) supposed to be rough so you get some grip to open it. Try one of the new Gerber models (e.g Flik) to see what happens when you try and OH open a blade with nicely rounded, polished hole. "Fit and Finish" can work against you!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login