ZapWizard's Leatherman Free P4 Mods
-
I will do the FREE series first, then look at making them for the Surge/Wave. No sense in investing money into prototyping all of them at once.
-
I finally got the scalpel holder installed. I ordered the wrong one to begin with. Got the right one and installed it today.I wasn't sure I really needed it, but after several trips out to the garage for my X-acto blade kit, I figured it needed to be in my P4. It's going to come in real handy. Now, Mr. ZapWizard, please stop making new stuff for the P4. I'm running out of things to replace!

-
Nice P4 you got there. I am also running out of things to replace. I got the tritium vial prototypes in, and didn't have any blades even left in my P4 to install them into. (I am going to put the main blade back in)
-
Sweet modding, Slygrin

-
Is it OK to post up a scalpel holder for sale on this site? Like I said in my earlier post, I ordered the wrong one to begin with. I have a "medium" available. I don't want to break any rules.
-
Just an FYI. The Scalpel holder is working great. Since I replaced the scissors for it, I've used it probably10x more than I have scissors in the last year. 2nd best mod i've done, I do use the bit holder much more though.
-
So someone on YouTube pointed out the new Havalon #70A blades which don't have the sharp tip. I have ordered these since the scalpel holder can tilt out and cause the point to be exposed.
https://www.amazon.com/gp/product/B011730QDY/ -
Is there any Leatherman multitool where a mod to increase the thickness can be done?
Allowing the thickness to be increased can allow extra implements to be added without removing original implements.
-
-
Hello all, this is my first post here. First, please pardon me if my online forum etiquette is lacking, it's been about 20 years since I've been on a forum of this style, since my Jedi Council forums days.
@ZapWizard, your mods have made me seriously reconsider my daily carry Multi-tool of 15 years, my trusty Victorinox SwissTool X. I work in IT, and I use it daily to pull and trim zip ties, unscrew PC components, slice packages or pallets open, and cut lots of things. I heard about the Leatherman Free P4, and decided to give Leatherman a solid chance at upsetting the venerable SwissTool.
I'm a tinkerer at heart, and I'm always looking to change or improve the things I choose to buy. The other day while I was cleaning the packing tape residue off the blade, I realized that there were about half the tools I never use. Then there's the scissors, which I know you guys love, but they are annoying me. Maybe it's because they don't cut well anymore, and Victorinox wouldn't warranty them, so I don't like them. The fact that Victorinox makes it difficult to modify their tool, and that their warranty procedure leaves something to be desired, I immediately turned to the best option for modification. In my opinion, that would be Leatherman. I've always wanted a Wave, ever since I saw Adam Savage use one on MythBusters. I've looked for them at thrift stores, but haven't had any luck, so I'm probably going to buy one used on fleaBay.
Since I'm looking to slim down my EDC, I'm looking for a tool that can replace one of my essential tools, a precision screwdriver. Now, I know what you're saying, the Wave has one, but that's too small for my needs. I personally carry, and outfit my IT department and team with Klein Tools precision screwdrivers. They come in a few sizes, and the bit is a non standard 3.5mm size, with integrated ball bearing retainer. There are three versions I own, and many more configurations for different trades. The models I own are the 32717 39 bit set with driver (just ordered because new tools), 32581 4 in 1 electronics screwdriver (my bench top, desk top, and laptop bag driver), and the 32614 4 in 1 pocket carry screwdriver (you guessed it, my pocket carry). They also have 32613, 32585, 32314, maybe a few others. I absolutely love these tools! The bits are dual sided, very high quality, self retaining, magnetic, and a nice length for laptop screws. The top cap spins nicely, but after a while, the rubber grip loosens and slides down. The pocket clip sucks, so it sort of just sits in my pocket most times I use it. You can find them on Amazon for pretty cheap, so when the grips wear out, I toss them, keep the barrels and bits, and order a new one.
What I would love to do is integrate this bit into a Leatherman tool, either a Wave or a P2 or P4. Because of the slimmer size, it would actually take up less space than your existing 4mm bit mod, which is amazing by the way! It would also integrate dual tips, in a wide variety of options, or specific tips from the 39 bit set. If you are interested in this mod, I would be happy to send you a tool above of your choice, or the ones that I recommend. And since I don't quite know if I still know how to upload photos, or what this forum's link policy is, I'll leave you to search for the above model numbers.
Thank you all for spurring my interest into another hobby I can tinker with! Now I'm going to go back to page 42 of the Leatherman Mods thread.

-
@GeneralOsik said:
I've always wanted a Wave, ever since I saw Adam Savage use one on MythBustersWhat I would love to do is integrate this bit into a Leatherman tool, either a Wave or a P2 or P4.
FYI, that video of Adam making his Wave holster is what got me started on all this in the first place.
I had an old RadioShack screwdriver that had those 3.5mm double sided bits with built in ball retention. I loved using them. The ball might mean no magnet is needed, which has been a pain for the 4mm bit driver.
The 32717 model is the most interesting since it come with so many bits.0.5mm isn't much of a saving over 4mm, but I am interested in trying out a design, I am not sure when I will get to doing it, but its on the list now.
-
@ZapWizard said:
FYI, that video of Adam making his Wave holster is what got me started on all this in the first place.I had an old RadioShack screwdriver that had those 3.5mm double sided bits with built in ball retention. I loved using them. The ball might mean no magnet is needed, which has been a pain for the 4mm bit driver.
The 32717 model is the most interesting since it come with so many bits.0.5mm isn't much of a saving over 4mm, but I am interested in trying out a design, I am not sure when I will get to doing it, but its on the list now.
I'm so glad you're interested!
I don't have it yet, but the 32717 bits look to be one sided and with no ball bearing retainer. Who knows, the bits might even be 4mm like iFixit or Wiha. All of the other tools listed look to have the 3.5mm dual sided bits with retainer. I also went ahead and ordered 32314, which appears to have all of the 4 different dual sided bits from the 4 in 1 sets, but no Schrader bit from the 32613 3 in 1 HVAC set. There is also a difference between the bits on my bench driver and my pocket driver. One set is slightly longer, and the bit pairing is different too. When I get home from work, I'll take some photos and upload them. That being said, I would recommend 32314 if you want all the different dual sided bits, 32581 and 32613 if you want to play with the different bit sizes and pairings, and 32717 if you want the large variety of single sided bits. Once you're ready to dig in, send me a message and I'll ship you some Klein Tools!
-
Here is an Imgur album https://imgur.com/a/Gfld8vM showcasing the bits from the two Klein drivers I have on hand.
How do you guys live with the file size limit?
-
@GeneralOsik said:
Here is an Imgur album https://imgur.com/a/Gfld8vM showcasing the bits from the two Klein drivers I have on hand.How do you guys live with the file size limit?
Use the bbcode img tags from imgur or you can use a resizing app.

-
I just got the Klein 32314, and these bits won't work. Two are 3.5mm, but the other two are 4mm and 4.75, or 3/16th. I should have seen this coming, since the tool is designed to be used with 9/64, 5/32, and 3/16 hardware. Those parts of the tool hold the bits.
I also got the 32717, and I have to say, this is the nicest bit set I own! The handle is almost identical to the pocket carry one I have, and the bit retention in the case is perfect. The case is very hard plastic and very nice. The bits are 3.5mm, 32.60mm long, but one sided.
I will order 32585, which has 4 Torx bits. This, with the 32581, should hold all 8 full length, dual sided, ball retention 3.5mm bits Klein sells.
Maybe there is a way to design the holder to either hold a double sided bit, or a single sided bit with a magnet installed in the bottom?
-
ZapWizard, any update/news on the Laser-etched ruler along inside of scales? I apologize if I overlooked a recent post on this topic.
-
Bump... Zapwizard, any news on the above inquiry?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login