Leatherman Free P2/P4 Club and Feedback Thread
-

Missing a good file and saw on this for sure :ahhh wished it had a PE Blade as well :'( :D I do
the flipping of it and the pliers themselves are pretty good as well
I may very well sharpen the awl to get proper one vs the screwdriver ended factory one
:D Overall a good tool but I think I would rather have a P4

Well actually I would rather have a Wave format tool or the Rebar format tool
:D -
You mean it's not the best LM multi ever ? :ahhh
-
Nope
and I even have the grey sheath 
:D
-
I wonder if that guy still works for Leatherman or whether he's back to being a used car salesman.

-
My chips would be on him being back to a used car salesman :D
-
I took a real close look at both the P2 and P4 and I must say, there is a bit of engineering that went into them. Can't wait to get the T2 and T4 in to compare them as well.
-
Some may say, over-engineering...
-
Free P4+ :
Rebar Awl
Wave / Charge can opener / wire stripper (or add wire stripper to current can opener)
Wave / Charge type ruler&
Removable Bit Driver designed for Free series tools
—-
Redesign those tools on the saw / serrated knife side
And perhaps a Wave style file instead of the Saw
In other words, I joined the club
-
Welcome & congratulations (commiserations?)
We look forward to your feedback after a little bit of carry & use.
-
Just wanted to bring this back up with some praise for these tools.
Doing some electrical around the house reinforced how great these tools are when in actual use. Cycling through tools with one hand while holding something in the other is just brilliant.
For this job, the reamer/small flat head fit perfect into the back of the old switches and sockets to free the wiring. The ruler/wire stripper had no issues removing more insulation. Switched effortlessly to the pliers to bend the loop for the new switches/outlets. Switched to the phillips driver and then finally to the file/flathead to reinstall.
I now own multiple Leatherman tools now... PST/PST II, Supertool/Supertool 300, Crunch, Skeletool, Charge + BO/G10, modified Rebars, bit kits and extenders, etc. When I'm actually planning to get work done around the house, I grab the Free P4. If I'm headed out and don't have a bag or holster, I grab the Free P2 and pocket carry it.
I attached photos comparing them to my Skeletool as well, thick and thin side of the Skeletool and the profile. The Free P2 cast almost the same shadow as the Skeletool, and though heavier, has scissors, multiple drivers, a file, and the wedge/flat head/package opener/pry tool which I think is basically the greatest multitool implement ever.
I think Leatherman hit it out of the park with these tools. I can't wait to see how they improve upon the concept further.




-
Great pics and a great write up

-
Feedback for movie buffs

-
I will say they aren't as bad as I originally feared they might be. I now have most of the Free collection short of a few colour variations for the K knives. The locking mechanism, once you get used to it, is ok. It works really well on the T and K series. I still find it a bit awkward on the P series though. Still re-adjusting my thinking on this lineup is a constant affair, and so far, my estimation of this family is improving with time.
-
Carried it for a year now. It’s pretty great. I prefer it over my Wave even though its not as robust or has no diamond file.
-
Well my new P4 has arrived today. First impressions are great, except access to the inner most tools on the awl side. It actually feels very much like an original Wave.
Tbh I would not have paid the full price at £169 in the UK but I managed to get it for £120. It was a second with inscribing over written in block.
I haven't tried it in anger yet but will let you know my thoughts. I'm new to the site but I've had leathermans since my first wave in 2001ish. I have built up a nice collection and usually carry an MUT, skeletool or Signal but always found I missed a file and scissors.
-
@Yoda mpb said:
Well my new P4 has arrived today. First impressions are great, except access to the inner most tools on the awl side. It actually feels very much like an original Wave.Tbh I would not have paid the full price at £169 in the UK but I managed to get it for £120. It was a second with inscribing over written in block.
I haven't tried it in anger yet but will let you know my thoughts. I'm new to the site but I've had leathermans since my first wave in 2001ish. I have built up a nice collection and usually carry an MUT, skeletool or Signal but always found I missed a file and scissors.
Are the inside tools on the awl side hard to open?
I mean, they should open just as easy with one hand as the other side, maybe the tool is still a bit stiff and needs to be worked in a bit more?
-
I started saving my quarters change since they came out and finally got a P-2 for a really good price on the bay. My first impressions were im glad i didnt pay full price for this thing. The screwdrivers are thicker and have no blade play when out for use but the other side which has the awl, can opener etc are much thinner and have a minor wobble, but definitley solidly locked into their hooks. I also bought the T and K series as they emerged on the secondary market so i was already used to the tool set. The small sharp anti wobble bumps to hold the handles dont really bother me much, just when im opening the main blade the lower handle has a minor side wobble. I will try to lightly tighten the pivot screw on the awl side to see if it helps the nano motion. overall its a seemingly workable contraption, definitley not a match for any swisstool or wave charge etc. For a low second market price it should be a good edc at work tool, havent tried the wire cutter function yet to see if it locks up the pivot. Currently have about 35$ in quarters saved for the P-4. and am watching the bay closely for a good buy in now deal, im done with the last second sniper bid action. Happy holidays to you all and stay safe out there.
-
@Top-Gear-24 said:
Are the inside tools on the awl side hard to open?I mean, they should open just as easy with one hand as the other side, maybe the tool is still a bit stiff and needs to be worked in a bit more?
It is starting to loosen up.... I agree the drivers are thicker. Its definitely over priced but I do like it so far. It seems to have all I want, I guess time will tell.
-
I am loving my P4. I sold off my Surge and picked up the P4 when Amazon dropped the price $20 last year. I am happier with the smaller size and weight, the one-handed operation comes in handy and makes the thing more fun to use than any other multitool I have had. I use it daily and have never had it fail to do what I needed. In about 9 months of use I have only experienced very minor tightening of the pliers after cutting some wire and it was easy to loosen it back up with a few open-close cycles. I know others have had bigger problems with the pliers but that has not been my experience, so I guess there were some QC issues with these.
Now that I know I am happy with it and keeping it as my daily carry I am going to add the 4 mm bit driver and horizontal sheath from ZapWizard. Might also get the t-shank adaptor in order to add the Surge diamond file back in... I do miss the bigger file since switching from the Surge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
