Skary Skeletool October Challenge?
-
Nice Jack O'Lantern, comis!

-

Happy Halloween! Find sometime tonight to carve the pumpkin, gonna I only use the Skeley for half the job, didn't realize how robust is the spine until you use it for carve. SAK small blade did help with all the tight turns and curves.
If I am not too late, I gonna submit this one for the GAW this month as well. :D
Awesome Carving!!

-
<u>DAY 30</u>
I can't believe that this is the end of the challenge :ahhh :ahhh :ahhh
You people have been great and the pictures and uses have been inspiring

It's been a great opportunity to use my Skele' more that I would normally

Thanks to Sos for sorting it and forcing some of us to give up the "usual suspects" (if only for a short while) ;)
On that note I'll add my last pic' (for now) and say to one and all, cheers and see you on the next one



-

Happy Halloween! Find sometime tonight to carve the pumpkin, gonna I only use the Skeley for half the job, didn't realize how robust is the spine until you use it for carve. SAK small blade did help with all the tight turns and curves.
If I am not too late, I gonna submit this one for the GAW this month as well. :D
Awesome carving job.
You’re in
PowerNoodle
Pauldmmwc
Poncho65
RF52
Antti Lammi
Comis -
-
Day 30
A box from Chewy arrived, so the Skeletool opened it immediately to an impatient dog who could smell the goods i side. It contained the new cover for Fisher’s cot and some treats. The Skeletool hammer head came in handy to help tap the corners on tight saving the hand.
Fisher approves of the job.
-
@Sos24 said:
Day 30
A box from Chewy arrived, so the Skeletool opened it immediately to an impatient dog who could smell the goods i side. It contained the new cover for Fisher’s cot and some treats. The Skeletool hammer head came in handy to help tap the corners on tight saving the hand.
Fisher approves of the job.
That's one happy looking pooch 
-
@Sos24 said:
Day 30
A box from Chewy arrived, so the Skeletool opened it immediately to an impatient dog who could smell the goods i side. It contained the new cover for Fisher’s cot and some treats. The Skeletool hammer head came in handy to help tap the corners on tight saving the hand.
Fisher approves of the job.
Pretty pup!!

-
@Sos24 said:
Day 30
A box from Chewy arrived, so the Skeletool opened it immediately to an impatient dog who could smell the goods i side. It contained the new cover for Fisher’s cot and some treats. The Skeletool hammer head came in handy to help tap the corners on tight saving the hand.
Fisher approves of the job.
Great use

Sent fra min FRD-L09 via Tapatalk
-
Fisher seems quite pleased!

-
**Day 30: **

This has been a fun challenge. Congratualtions to awl who made this challenge so much fun, kept it interesting along the way, and crossed the finish line.
Thanks to Sos24 for kicking this thing off and keeping us in line....for the most part. ;) 
I started this challenge a bit ambivalent about the Skeletool and remain the same.
On the one hand, it is hard not to like the Skele. It is a cool looking multitool. It is easy to carry with the integral pocket clip. It isn't too bulky or heavy.
If I think that it is a nice pocket knife, one with a pair of pliers and a few drivers, it is pretty darned good. During this challenge, I most needed a knife and a pair of pliers. The Phillips driver was handy a couple of times. The only thing I really missed was a can opener.....and a pair of scissors. Be that as it may, given my circumstances over the challenge, I never felt deprived.
So....a perfect multitool....right?
Well.....there's the rub: If I start thinking about it as a multitool....it starts to feel a bit thin in the tool selection.
I don't think I did anything with the Skeletool that I couldn't have done with a Deluxe Tinker, Handyman, or SwissChamp. And the Deluxe Tinker is even easier to carry. True, the Skele's pliers are more capable, but for my uses this month...the DT wold have worked as well.
Comparing it to other Leatherman tools, it starts to look downright limited.
The PST is roughly the same size, has better needle nose pliers and more tools. For those of you who like a file....the PST has a decent file. For us awl lovers, the PST has a lame but useful awl. And the PST has a very useful can opener/cap lifter. The Skele's cap lifter is a nice thought, but clumsy to use.
The Skeletool might be a bit easier to carry with its clip and snap link (what is up with that snap link....? anyone actually use that?
), but I am very happy dropping a PST into my pocket. Or using the handy sheath.The Juice S2 has some serious advantages over the Skeletool, and with only slightly smaller pliers. The Juice is smaller, easier to carry, has scissors (!), a cap lifter/can opener, several drivers, and an outside opening knie blade that is nearly the same length of the Skele's blade. The S2 may be even easier to carry than the Deluxe Tinker.
In addition to being smaller overall, the Juice weighs a little less (on my scale):

In just about every way--size, portability, capability, and even comfort--the Juice S2 takes the win.
So, why own or carry a Skeletool?

For me...I like the simplicity. For me it's a pocket knife with some pliers. Maybe I don't need more than that in reality. My grandfather got by with a Stockman traditional. He probably would have been tickled with delight with a Skeletool. He had a can opener in the kitchen. He kept files in a tool box. He didn't bother with scissors much. As stated earlier, I never lack for a tool when I needed one.
I also like the ergos. Yes, there are a few sharp edges here and there, but overall the Skele's ergos are quite nice. I find it is a pleasant tool to hold and use. The blade is well designed and functional.
Lastly, I like the fact the the two onboard 2D bits are customizable. If I know that I might need a specific driver for some piece of kit or gear, I can be sure to have the appropriate bit stowed and ready. I can toss a few extra bits into a pocket. So in my mind, there is a bit of additional versatility that the Skele can provide with being able to change bits. (For this challenge though, I just left the Phillips and Flat driver bits in place....don't often need much else.)
So, I come away from this challenge liking the Skele as much as or more than, ever.....but I probably won't carry it much. I like having a wood saw, scissors, and a can opener.
Where's me Rebar X......?
-
Can’t believe it’s the last day, I will be taking my day 30 shot a little later. Will make it an outdoor pic for my qualification for the very generous give away..
-
This has been a fun challenge. Congratualtions to awl who made this challenge so much fun, kept it interesting along the way, and crossed the finish line.
Thanks to Sos24 for kicking this thing off and keeping us in line....for the most part. ;) 
I started this challenge a bit ambivalent about the Skeletool and remain the same.
On the one hand, it is hard not to like the Skele. It is a cool looking multitool. It is easy to carry with the integral pocket clip. It isn't too bulky or heavy.
If I think that it is a nice pocket knife, one with a pair of pliers and a few drivers, it is pretty darned good. During this challenge, I most needed a knife and a pair of pliers. The Phillips driver was handy a couple of times. The only thing I really missed was a can opener.....and a pair of scissors. Be that as it may, given my circumstances over the challenge, I never felt deprived.
So....a perfect multitool....right?
Well.....there's the rub: If I start thinking about it as a multitool....it starts to feel a bit thin in the tool selection.
I don't think I did anything with the Skeletool that I couldn't have done with a Deluxe Tinker, Handyman, or SwissChamp. And the Deluxe Tinker is even easier to carry. True, the Skele's pliers are more capable, but for my uses this month...the DT wold have worked as well.
Comparing it to other Leatherman tools, it starts to look downright limited.
The PST is roughly the same size, has better needle nose pliers and more tools. For those of you who like a file....the PST has a decent file. For us awl lovers, the PST has a lame but useful awl. And the PST has a very useful can opener/cap lifter. The Skele's cap lifter is a nice thought, but clumsy to use.
The Skeletool might be a bit easier to carry with its clip and snap link (what is up with that snap link....? anyone actually use that?
), but I am very happy dropping a PST into my pocket. Or using the handy sheath.The Juice S2 has some serious advantages over the Skeletool, and with only slightly smaller pliers. The Juice is smaller, easier to carry, has scissors (!), a cap lifter/can opener, several drivers, and an outside opening knie blade that is nearly the same length of the Skele's blade. The S2 may be even easier to carry than the Deluxe Tinker.
In addition to being smaller overall, the Juice weighs a little less (on my scale):
In just about every way--size, portability, capability, and even comfort--the Juice S2 takes the win.
So, why own or carry a Skeletool?

For me...I like the simplicity. For me it's a pocket knife with some pliers. Maybe I don't need more than that in reality. My grandfather got by with a Stockman traditional. He probably would have been tickled with delight with a Skeletool. He had a can opener in the kitchen. He kept files in a tool box. He didn't bother with scissors much. As stated earlier, I never lack for a tool when I needed one.
I also like the ergos. Yes, there are a few sharp edges here and there, but overall the Skele's ergos are quite nice. I find it is a pleasant tool to hold and use. The blade is well designed and functional.
Lastly, I like the fact the the two onboard 2D bits are customizable. If I know that I might need a specific driver for some piece of kit or gear, I can be sure to have the appropriate bit stowed and ready. I can toss a few extra bits into a pocket. So in my mind, there is a bit of additional versatility that the Skele can provide with being able to change bits. (For this challenge though, I just left the Phillips and Flat driver bits in place....don't often need much else.)
So, I come away from this challenge liking the Skele as much as or more than, ever.....but I probably won't carry it much. I like having a wood saw, scissors, and a can opener.
Where's me Rebar X......?
Great review!!

-
Day 30 of 30
Today used Skeletool to tighten my glasses screws.

I gotta admit this challenge revealed me that i dont really like carrying Skeletool as my only one cause it doesnt have scissors, file or saw. Pairing Skeletool with SAK or other MT would be just good but as alone it doesnt just work.
Only Tools Matters
-
@Antti Lammi said:
I gotta admit this challenge revealed me that i dont really like carrying Skeletool as my only one cause it doesnt have scissors, file or saw. Pairing Skeletool with SAK or other MT would be just good but as alone it doesn't just work.
Paired with a Climber or Huntsman, the Skele becomes a great partner in a sweet combo. 
-
Day 30
Goes without saying, I love this Skeletool my daughter has bought for me!
While there are many Multi-Tools which offer much more functionality, I simply love it’s looks and the way it works, I love goofing around with it and hopefully didn’t ruffle any feathers “defacing” it in the process but I’ve been kinda bored being newly retired.
Having the opportunity of working/retired inside my machine shop, I have most every type of tool I need at my fingertips so my Skele is really just icing on the cake for me. Although it did come in very handy having it along on our last camping trip!
Wonderful to clank pliers with all you fine folks and many thanks to Sos24 for this fun challenge!!

-
Fun shot!

-
Hello day 30.
Thanks to the team for a great challenge and all the great pics. The Skele was a handy tool although I missed some of the other features like a file and scissors.
Tomorrow it will be back to the Wave .

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
