Multitool file blades: worth having?
-
Yes. And I will have a Vic Classic....with one of my favorite multitool files. :D
-
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools. I do have a Rolson fileset, but I'd rather just use a MT than dig that out of the cupboard

In the six months I've used my files (Rebar, Swisstool and Wave) to:
-Saw the tip off a nail and deburr the edge to make a ducktape roll
-Saw the lock off of my Gerber Zipknife since it got stuck open (filing down the corners and burrs)
-Polish out a chip in the edge of the 'package openener' on both my Rev (awful tool
) and Free T4And other misc. edge smoothing, I understand having a file a lot more than I understand having a woodsaw

-
@GearedForwards said:
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools.Sounds like the file has come in handy for ya a few times. I'd agree with you about not being able to replicate a file in the wild, if multitool files were actual files, properly cut and hardened. (Although that may be true of other tools as well.) It seems that some of your tasks could have been accomplished with an abrasive rock or sharpening stone. I often carry a small sharpening stone with me to touch up an edge, anyway. You might argue that I'm carrying extra gear (a stone) to make up for a lack of a file. Perhaps.
I'm curious to know which specific file did you use to clean up the edge of the package opening tool?
How soft is the steel of the package opening tool? And did that contribute to its problems? And did the file work because the steel was soft?
Has your need for a file led you to carry a specific multitool? Or have you found all multitool files to be equally effective? If you are a dedicated fileman, I would expect/presume that your choice of multitool would be dictated, partially, by the file available. Is that the case, or do other features get priority with the file being secondary? Or tertiary?
For my part, I almost cary a multitool despite it's having a file. I have an old 'Made in USA' SOG Paratool. I really like this multitool because it is compact and capable. And the file is descent....by which I mean 'not horrible'. I carried this tool under my mountain bike seat for about 2 decades. I carried it along because I thought the pliers and file might come in handy if I had a repair or improvisation to make somewhere down the trail. Of course that never happened. (Flat tires did, but I never needed to smooth a link or polish a rim to get back home.) I think that was the first and last instance where I choose a tool, in part, for it's file.
Now I almost carry a multitool despite it's having a file. Alan just sent me a Vic Ranger (thanks, Alan!)--a Huntsman with a file layer. So...if I don't need a file, wouldn't I be better off with a Huntsman? Nah....I like the extra backside tools! And, who knows? Maybe the file could come in handy for something some day?
(I guess I need to do a Vic Ranger challenge.)During a few multitool challenges where I've had a file in my multitool, I have tested the files on an axe edge. Some 'make the cut', but even these are pretty feeble and minimally useful at best. Most struggle to sharpen an axe, some (I'm looking at you SOG) don't even cut an axe. Keep in mind most axes are heated and tempered to be softer (to resist chipping and be shock resistant) than a knife or chisel edge.
For actual axe repair and saw/chainsaw sharpening, I use a proper file. They work brilliantly. To get a good edge on an axe, I finish with a stone or sandpaper. It would never occur to me to use a multitool file to tackle such a task except in the most unusual circumstances. Stranded in the woods with a dull axe.....I'd find a good stone and set to restoring the edge. In the process of doing that, I'd probably damage a fingernail....and then I'd be glad to have a file in my multitool. ;)
-
@GearedForwards said:
I went with 2, I live having ready access to a metal file, it's one of the few tools I can't replicate in the wild or have on many other tools. I do have a Rolson fileset, but I'd rather just use a MT than dig that out of the cupboard
In the six months I've used my files (Rebar, Swisstool and Wave) to:
-Saw the tip off a nail and deburr the edge to make a ducktape roll
-Saw the lock off of my Gerber Zipknife since it got stuck open (filing down the corners and burrs)
-Polish out a chip in the edge of the 'package openener' on both my Rev (awful tool
) and Free T4And other misc. edge smoothing, I understand having a file a lot more than I understand having a woodsaw

seems like you use your multitool file to service your other multiools. 
That reminds me that the main reason I go to work is so that I can earn money to make car payments, for the car that I only use to get to work.

-
@ElevenBlade said:
seems like you use your multitool file to service your other multiools. 
That reminds me that the main reason I go to work is so that I can earn money to make car payments, for the car that I only use to get to work.

I know that feeling......

-
Files? Depends on whose Multitool you are using..


-
@Sam Lim said:
Files? Depends on whose Multitool you are using..


-
Had 3 or more files with me today

I had a Vic Executive with its superb file, my Charge knife and a Supertool 300 all day and a Charge plus earlier with me as well :D I had been deprived for the whole month and figured I would splurge today
:D -
1st things 1st, I don't think it makes sense for us to be conflating nail files and bigger files that would be used on metal. Sure they are both files but discussing them together is like comparing a go cart and a shopping cart. They just have totally different uses. To that end, I think that the nail file is a very useful tool to have on any keychain sized MT. I particularly like the one that is on the Gerber Clutch.
I am also a fan of metal files on full size multi tools but as many others already said, most MTs use garbage files that are useless. On most days I carry a Leatherman Signal. I really wish Leatherman would make a Signal+ or Signal 2 or something that had 4 outside tools rather than 2. I would love for them to put the Wave file on the Signal but I do not want to loose the wood saw. On some days I carry a Leatherman Crunch. Even though the file on the Crunch is not as big as some others, it is big enough to get many jobs done. I have used it many times to de-bur various items. One time a friend needed me to cut some metal pipes that were part of his film equipment. I was having trouble getting the cut started with my hack saw so I pulled out the Crunch and used the edge of the file to start a groove in each pipe. After that it was much easier to use the hack saw. Once the cut was made the file came in handy again to smooth out the newly cut edges.
Has anyone made a poll like this for our opinions on scissors? I feel that is the most divisive MT issue :)
-
@Nix said:
Sounds like the file has come in handy for ya a few times. I'd agree with you about not being able to replicate a file in the wild, if multitool files were actual files, properly cut and hardened. (Although that may be true of other tools as well.) It seems that some of your tasks could have been accomplished with an abrasive rock or sharpening stone. I often carry a small sharpening stone with me to touch up an edge, anyway. You might argue that I'm carrying extra gear (a stone) to make up for a lack of a file. Perhaps.I'm curious to know which specific file did you use to clean up the edge of the package opening tool?
How soft is the steel of the package opening tool? And did that contribute to its problems? And did the file work because the steel was soft?
Has your need for a file led you to carry a specific multitool? Or have you found all multitool files to be equally effective? If you are a dedicated fileman, I would expect/presume that your choice of multitool would be dictated, partially, by the file available. Is that the case, or do other features get priority with the file being secondary? Or tertiary?
For my part, I almost cary a multitool despite it's having a file. I have an old 'Made in USA' SOG Paratool. I really like this multitool because it is compact and capable. And the file is descent....by which I mean 'not horrible'. I carried this tool under my mountain bike seat for about 2 decades. I carried it along because I thought the pliers and file might come in handy if I had a repair or improvisation to make somewhere down the trail. Of course that never happened. (Flat tires did, but I never needed to smooth a link or polish a rim to get back home.) I think that was the first and last instance where I choose a tool, in part, for it's file.
Now I almost carry a multitool despite it's having a file. Alan just sent me a Vic Ranger (thanks, Alan!)--a Huntsman with a file layer. So...if I don't need a file, wouldn't I be better off with a Huntsman? Nah....I like the extra backside tools! And, who knows? Maybe the file could come in handy for something some day?
(I guess I need to do a Vic Ranger challenge.)During a few multitool challenges where I've had a file in my multitool, I have tested the files on an axe edge. Some 'make the cut', but even these are pretty feeble and minimally useful at best. Most struggle to sharpen an axe, some (I'm looking at you SOG) don't even cut an axe. Keep in mind most axes are heated and tempered to be softer (to resist chipping and be shock resistant) than a knife or chisel edge.
For actual axe repair and saw/chainsaw sharpening, I use a proper file. They work brilliantly. To get a good edge on an axe, I finish with a stone or sandpaper. It would never occur to me to use a multitool file to tackle such a task except in the most unusual circumstances. Stranded in the woods with a dull axe.....I'd find a good stone and set to restoring the edge. In the process of doing that, I'd probably damage a fingernail....and then I'd be glad to have a file in my multitool. ;)
I could have used a stone (I've got a couple of low quality sharpening stones in varying grits, and when my Pioneer took a tumble awl point first onto a ceramic plate it was the 100 grit Wicked Edge stone that made it useable again), but if we go down the route of task x could have been accomplished with tool y then we get on a slippery slope with us gear heads
I doubt any part of a multitool will ever actually come close to being a good example of that tool on it's own, I'm primarily a knife man and that certainly holds true in that arena.I think it's worth prefacing that I don't think I actually have a bad MT file, all of my MT files are either Victorinox or Leatherman so if it's brands like SOG, Gerber etc. that are the bad examples I've no diea about them

I used the wave's file on the package tools just because I didn't want it to look too messy and the diamond side is the finest file. The steel on the Rev's tool is undoubtably garbage
but I think that the T4's is decent enough, I can't say what the problems were, as I've never actually used either of those tools. I noticed the damage on them when looking over my tools, the Rev being new and not really used because it's awful and the T4 being a GAW win, I'd only use them on tape or plastic personally though anyway.I don't need a file on a regular basis, but it's one of the tools that puts the Wave in a support pouch over the Skeletool for example. I personally think that the saw end on the Swisstool cuts better than the Rebar and Wave, but the cross cut side on the Rebar is nice and aggressive. A file would be something that I look for in a 'larger' tool category, I currently would consider my perfect SAK to be opener layer, blades layer, mag/phillips layer, scissors and blades (I haven't had any experience with a 91mm file yet, but I assume it would be a similar quality to the Swisstool?).
I'm not sure I would use a MT file on an axe, or any hardened steel to be honest, and I couldn't fault one too badly for failing at that task, if it can't tidy up a cut nail or knock a burr off in short order tahn that's another matter though!
I've not had cause to use my Squirt's file yet, it seems to be a miniature metal file complete with sawa, but I haven't the foggiest how it'd actually perform?

Fingernail wise the Classic/mini Champ do splendidly in that arena, I recently learned that they changed the Cadet's file... but I've no idea why, it's not like fingernails are a difficult task and my cadets have the same file as the Classic...
-
@King_Gorilla said:
Has anyone made a poll like this for our opinions on scissors? I feel that is the most divisive MT issue :)
. -
@ElevenBlade said:
seems like you use your multitool file to service your other multiools. 
That reminds me that the main reason I go to work is so that I can earn money to make car payments, for the car that I only use to get to work.

And my knives to open other knives, you're talking like there's life outside of this beautiful cycle we all share?

-
While I've actually only used mine a handful of times, I'm always glad to have one with me.
-
@GearedForwards said:
And my knives to open other knives, you're talking like there's life outside of this beautiful cycle we all share?
It's out there. It's much more uncertain, less self reliant and resilient, and less kind.

-
@GearedForwards said:
Fingernail wise the Classic/mini Champ do splendidly in that arena, I recently learned that they changed the Cadet's file... but I've no idea why, it's not like fingernails are a difficult task and my cadets have the same file as the Classic...Mystery to me, too. Perhaps cheaper to manufacture?
The new Cadet file is....I believe....similar to the Executive file....which makes for a decent fingernail file. Although, for fingernails, I kinda prefer the old style.
I think that in the past I've argued that the Sportsman has a slight advantage over the Tourist because it has a nail file in place of the small blade. I'd stick with that assessment now--I've found that finger nail file to be a useful EDC tool.
-
well on a larger MT or even a SAK (over 4 layers) I personally like to have it. the big question is quality as some are really horrible.
the metal file and wood saw are a bit hand in hand for me. not tools that I'll use every day but every so often, they are irreplaceable. this year alone, I've gotten lucky by having the larger MT with me when a file was needed - customizing some bicycle stuff and cleaning up/restoring gardening equipment. to be fair, the gardening equipment task happened because the full size files had completely rusted over from years of neglect, but the frustration of people not caring for their tools is a different topic
-
I don’t use files a lot, but definitely like to have.
My edc rebar has the stock file, and I swapped the plain edge blade with a pst II file.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

