What did you use your Sak on today?
-
I replaced a surveillance camera that had died.
This camera is in a spot that is hazardous to reach because it is on the side of a hill and it is easy to slip on the loose dirt and fall.
I had to have one hand free to keep me upright and since the camera was in one hand, I did not have a free hand to take my tool bag. I had my Cybertool 41 in my pocket which I figured would be good enough.
The Cybertool driver worked great removing the old camera and attaching the new one. This camera has an SD card and I used the bottle opener to get the SD card to pop out by pushing the card in farther (spring mechanism). After the card popped out, the pliers were able to grab it since it only popped out about 1/8 inch.
Thanks to the Cybertool, I didn't have to risk falling or making a second trip for my tools. I told my wife about it and she said, "Uh huh..." and went back to checking Facebook. So I figured I would tell someone who would care.

-
Awesome adventure , Swiss Guy, you Daredevil!

Sent from my SM-T387V using Tapatalk
-
@Swiss Guy said:
I replaced a surveillance camera that had died.This camera is in a spot that is hazardous to reach because it is on the side of a hill and it is easy to slip on the loose dirt and fall.
I had to have one hand free to keep me upright and since the camera was in one hand, I did not have a free hand to take my tool bag. I had my Cybertool 41 in my pocket which I figured would be good enough.
The Cybertool driver worked great removing the old camera and attaching the new one. This camera has an SD card and I used the bottle opener to get the SD card to pop out by pushing the card in farther (spring mechanism). After the card popped out, the pliers were able to grab it since it only popped out about 1/8 inch.
Thanks to the Cybertool, I didn't have to risk falling or making a second trip for my tools. I told my wife about it and she said, "Uh huh..." and went back to checking Facebook. So I figured I would tell someone who would care.

I know the 'uh huh' buddy

-
You were lucky the correct bit was in the CT driver. Or maybe you are just a smart (Swiss) guy and thought ahead :)
-
@Swiss Guy said:
I replaced a surveillance camera that had died.This camera is in a spot that is hazardous to reach because it is on the side of a hill and it is easy to slip on the loose dirt and fall.
I had to have one hand free to keep me upright and since the camera was in one hand, I did not have a free hand to take my tool bag. I had my Cybertool 41 in my pocket which I figured would be good enough.
The Cybertool driver worked great removing the old camera and attaching the new one. This camera has an SD card and I used the bottle opener to get the SD card to pop out by pushing the card in farther (spring mechanism). After the card popped out, the pliers were able to grab it since it only popped out about 1/8 inch.
Thanks to the Cybertool, I didn't have to risk falling or making a second trip for my tools. I told my wife about it and she said, "Uh huh..." and went back to checking Facebook. So I figured I would tell someone who would care.

A job well done [emoji1303]
-
Rescued a snake from a Neighbour’s yard. Needed to put a few breather holes in the lid. SC awl was put into service.

Harmless brown house snake, and had recently snacked on what was probably a small rat. Will be released in a safe area.


-
Frankly speaking I’m about to sh*t my pants just looking at it [emoji23][emoji23][emoji23]
-
Used a tiny screwdriver that usually hides within a corkscrew for the final assembly of my grandpa’s razor I’ve been restoring lately

For those interested this is what it looked like before I made a handle out of a piece of ash and polished the blade

-
that looks great, alexanderre! -
Excellent work, beautiful. Good job Alexanderre!

Sent from my SM-T387V using Tapatalk
-
Thanks, guys [emoji1317] It was my first restoration project done using my new Dremel 4300 and Dremel Moto Saw [emoji1320]

-
Wow.

Did Christmas come early?Sent from my SM-T387V using Tapatalk
-
Wow, nice little workstation!
JR -
@MadPlumbarian said:
Wow, nice little workstation!
JRThanks bud [emoji1317]
I love how easily that is both set up and disassembled if necessary -
@alexanderre said:
Thanks bud [emoji1317]
I love how easily that is both set up and disassembled if necessaryI have a box / tote that’s made for the Dremel that has a vice and pole to hang it from and tool bit storage, and that’s about as big as my workstation is, even though I have my other workbench and a two car garage.. I so wanted to get one of those all in one units that you can disassemble and it turns from a drill press into a lathe and other tools..
JR -
My last use of my Sak, rather then sitting here and opening mini bags of Halloween candy just snip the one end off and drop them into a container..
JR
-
@MadPlumbarian said:
I have a box / tote that’s made for the Dremel that has a vice and pole to hang it from and tool bit storage, and that’s about as big as my workstation is, even though I have my other workbench and a two car garage.. I so wanted to get one of those all in one units that you can disassemble and it turns from a drill press into a lathe and other tools..
JRYep, that’s exactly the one I have and I totally love it [emoji1305] Really nice and versatile workstation
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I can join that club too.....