Help selecting Multitool
-
If he plans to belt carry and the extra weight is not an issue the surge is a good option.
Also if he will find himself needing a file or saw regularly They are replaceable on the surge which is also handy if you need to use them to destruction to get the job done. -
I would also suggest a Surge.
-
You know I have a love/hate relationship with the Surge, but one thing I do really like is the blade exchanger and the fact you can swap in a hacksaw blade*, which is immensely useful. Also, like others have stated, it's very glove friendly.

*Pic to follow.
-
Welcome to
SURGE! Seems to be what most are suggesting
I really like it but you can't go wrong with most of the choices you have to pick from in your list 
BO is pretty durable and I have a few that get some very good use
Here is a Supertool 300 that I have used quite a bit and it still looks pretty good ;)
-
Thank you, everyone - What a wonderful group! I was going crazy with all the different choices. It looks like the winner is the Surge - Now I can get one ordered in & have time to make him a nice leather sheath for it.
-
-
Most guys carried Leatherman when I was in the Marines. The various types of Charges and Waves were big at the time. The Gerber tools were issued in some units but were considered disposable. I remember seeing an ammo box full of busted ones at supply. I recommend the Wave +. He will thank you.
-
-
The surge is a fine tool....so is the wave - and as long as your son is not overly ham fisted he won't break either if used to their purpose.
A leather sheath is a fine thing, however for practicality he may prefer Leatherman's Molle sheath.
Now your boy just has to watch out for the one thief in the corps...

Terminal Lance #345 “Gear Adrift” - Terminal Lance
There's an old and eerily accurate saying in the Marine Corps: There's only one thief in the Marine Corps, everyone else is just trying to get their smurf back. Then again, there's also another saying: Gear adrift is gear a gift. One of my first experiences with lost gear was at SOI at Camp Pendleton.
Terminal Lance - I've got soul, but I'm not a soldier (terminallance.com)
-
I cannot recommend the Center Drive (and Gerbers). The design is flawed as the pry-tool uses the plastic lock as lever. Also, Gerbers QC seems to be even worse than that of LM (my Center Drive lost out against a brass nail and chipped).
Lots of recommendations here for the Surge I see and I agree, it is a beast. Can't really fault that.
Now there are IMHO 2 disadvantages to the Surge.
- it is huge and soldiers often carry a ton of stuff already.
- Lots of tiny parts that easily can get lost (bits, bit-extender, t-shank-blades).
If either of those 2 points are a concern I would recommend the Victorinox Spirit (my preferred choice, by far best ergonomics and most tools for it's size/weight) or the Rebar (if US made is preferred, also cheaper, but again a LM, so check if everything is good upon arrival).
If those 2 points are not a deal-breaker, then I suggest the following to get the most out of the Surge:
- Buy the surge in a store and make sure the outside tools lock properly. If you order online, check the tools upon arrival and don't hesitate to send it back if they don't lock up properly (LM Quality has seriously been lacking in recent years and especially on the Surge, tools that don't properly lock up are fairly common.)
- Buy the bit-kit and the extender, without it, the Surge is seriously crippled. The Extender allows the use of regular bits, especially useful if LM bits are not available.
-
100% -
A Spirit XBS would be my pick, but they are so superior that it might be the last MT he will ever need. :D
-
Any thoughts about Leatherman OHT??
Sent from my SM-G960F using Tapatalk
-
Here's mine...

... And with the hacksaw blade fitted - which works surprising well.


-
I'll be the contrarian today. The Surge is way too heavy and has a bunch of fiddley little pieces that are not permanently attached to it that will get lost, those being your screw driver bits your sawblade and your file. The Super Tool 300 is a little bit lighter and has permanent tools. It does not have one hand opening blades but a Marine is going to have his field knife on him for most of his cutting needs anyway and the multitool is secondary. Another option is the Leatherman MUT which was designed for troops and has implements specifically for weapons maintenance. The MUT might be your best option.
-
@Alan K. said:
I'll be the contrarian today. The Surge is way too heavy and has a bunch of fiddley little pieces that are not permanently attached to it that will get lost, those being your screw driver bits your sawblade and your file. The Super Tool 300 is a little bit lighter and has permanent tools. It does not have one hand opening blades but a Marine is going to have his field knife on him for most of his cutting needs anyway and the multitool is secondary. Another option is the Leatherman MUT which was designed for troops and has implements specifically for weapons maintenance. The MUT might be your best option.I didn't want to raise the issue of fiddly bits and the liklihood of collecting grit and grease, cause it looks like he's already made a decision :P
Whilst the MUT does have the carbon scraper and pin punch, it fails most of your other criteria - being that it too is annoyingly heavy, it's main feature is a large knife - which could be a boon if he doesn't carry another, or a waste if as you say, he carries a dedicated blade. The pocket clip could be handy, but the handle retention clip system and the driver bit carrying system are both a PITA to actually use.
The MUT looks fantastic on paper, but falls short in practice.
My vote is always for the Wave, it's a best seller for a reason, (Mine predates the updated plier head - perhaps the hardened cutters would turn me off, but I've got scars from the Gerber cutters that shatter when you look at them)
If his lad has big hands, or doesn't mind the weight, the Surge is an excellent choice, and depending on what sort of work he does, the blade exchanger may very well pay dividends in due course.
Edit: Just looked up what a Motor T was - he's a truck driver. Weight is not an issue
The truck will mostly likely be fitted with a general servicing kit, so spanners and hammers won't be an issue.The scissors on the surge are well sized for dealing with pesky MREs

-
I have never owned a Surge or a Centerdrive, but I have messed around with both.
I prefer the smaller less heavy tools like the wave and charge. The Center drive is just under 10 ounces! That might as well be an extra large (heavy duty) like the surge. I like that the Centerdrive has the outside accessible bit driver, but the OTF design makes the inside tools a pain to use. If I carried the Centerdrive I would only be using it for the pliers and the bit driver, with the blade as a back up to an EDC knife. That effectively makes it a 10 ounce plier w/ screw driver. With the Surge you have a bit driver that is less user friendly, but you get a LOT more tools for about 2 more ounces of weight.
Do you think your son will use the wood/metal file, the wood saw, or the scissors? That is the main difference as far as I am concerned. If those tools would be useful to him then a Wave or Surge is probably the better option. If you think those are not useful to him AND you think he would use the bit driver all the time... maybe the Centerdrive would be better.

good luck with your choice
-
It still seems there is no "best" tool, and it is totally based on preference influenced by what tools and system are used most.
So the bottom line for me seems to be:
- Quality
- Weight
- Ease of use (outside opening)
- Tool interchangeability
Yes, he will be in a shop or vehicle primarily, so weight isn't too big a deal (plus he is a weightlifter). He has big hands - I expect those hands to be greasy, cold, or in gloves when he needs the tool. My expectation is for him to have something that will be available in a "situation" where he has a tool handy, even if it's not the best one. I don't imagine he would use it to replace standard tools. In other words, it's a field expedient tool.
This question has generated a lot of good feedback and I'm thankful for that. Tools were mentioned that I have never heard of. A lot of abbreviations and acronyms I have had to look up. Some mentioned would definitely be the last multitool because of the price point. I can understand now why many here carry multiple different tools brands and styles.
The great thing is that I can ask him for feedback and if he says something could be better I can always get him something different for his birthday!
Thanks, all and have a happy Thanksgiving!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
