Been doing some work in the Wiki
-
@Reinier said:
Personally, I don't like that newly added texts or other content immediately gets altered (always by the same editor) or moved to other sections within the page (intro/variations/identifiers). We don't all write in the same way and not all pages follow the same template. So I really don't see the point of correcting other people's contributions. It feels like "thanks for trying, but it's not good enough".The wiki is not owned by one single person.
On the contrary, I advocate the maximum standardization and use of templates, whenever possible.
At the same time, I do not make a difference between the pages created by me and others. And I don’t worry if someone changes the contributions I made. The wiki is not owned by one single person.

But, anyway, I don't have time to work on the SAKWiki project right now, so my opinion doesn't matter.

P.S. I apologize to everyone who was upset by my edits.

-
@Nick4 said:
On the contrary, I advocate the maximum standardization and use of templates, whenever possible.Maybe I have not searched well enough, but what exactly is the template for a SAK page?
What information do we put in the intro section? Because I sometimes mention some specific variations (because why not?) and it gets moved to the Variations section. And who decides which variations are mentioned there, and which ones only get an entry in the Identifiers section?
Re. Identifiers: the European and US identifiers are not always listed in the same way. I like the version with headings for the different numbering systems. Maybe we could also add the old model numbers under a separate heading within the section?
It's also not always clear which variations are actually listed as variations and which ones are under Identifiers only.
At the same time, I do not make a difference between the pages created by me and others. And I don’t worry if someone changes the contributions I made. The wiki is not owned by one single person.

I think some people sometimes force their opinion onto others. I'm not the only one who thinks that. Maybe I shouldn't make such a big deal out of it.
But seriously: one page for all Cybertools? Makes no sense to me. Just one example.
And merging two model lines with different designs and different sizes into one page? I don't get it.But, anyway, I don't have time to work on the SAKWiki project right now, so my opinion doesn't matter.

Your opinion matters! To me anyways :) You are a huge contributor (unlike myself). But even if you were not, your opinion would still matter of course.
P.S. I apologize to everyone who was upset by my edits.

I did not mean you in my previous post.
All good friends?

-
Thank you very much for your frank opinion, Reinier!
@Reinier said:
Maybe I have not searched well enough, but what exactly is the template for a SAK page?Strange, but I found it easily. ;) (And if it did not exist, it would have to be created.)
And, surprisingly:
*Last Modification: Friday 04 of January, 2019 19:10:55 MSK by Reinier. *
Perhaps this template is imperfect and needs to be reworked (for example, now everywhere the title of the section 'Related Knives' is replaced by 'Related Models').

But this is also nothing more than a private issue of standardization.@Reinier said:
What information do we put in the intro section? Because I sometimes mention some specific variations (because why not?) and it gets moved to the Variations section. And who decides which variations are mentioned there, and which ones only get an entry in the Identifiers section?IMHO, all these issues can (and should) be discussed.

Of course, standardization does not exclude flexibility and creative freedom.
@Reinier said:
Re. Identifiers: the European and US identifiers are not always listed in the same way. I like the version with headings for the different numbering systems. Maybe we could also add the old model numbers under a separate heading within the section?I do not know. This can also be discussed.
But my reasons for the preference for standardization are very simple:
-
SAKWiki for visitors is just a site like the others.
-
And any professionally made site should have a clear navigation, an unified design and formatting (so to speak, as in the army - "albeit ugly, but uniform"). In particular, there should be no empty sections, physical specifications, etc.
-
The information must be accurate, consistent, complete and easy to find.
My little coloboration experience at Wikipedia also tells me that templates and guidelines should be used as often as possible.
But, of course, this is all nothing more than my personal opinion.
@Reinier said:
It's also not always clear which variations are actually listed as variations and which ones are under Identifiers only.IMHO, all possible variations should be described in the 'Variations' section.
@Reinier said:
I think some people sometimes force their opinion onto others. I'm not the only one who thinks that. Maybe I shouldn't make such a big deal out of it.Maybe.
But for me personally, working on the SAKWiki project is an opportunity to thank all those who have generously shared information.
And I don’t worry if someone changes my contribution (the experience of working on Wikipedia is very helpful here - it’s much more stressful there).In the end, as one friend of mine says, "calm, children are not born from this." ;)
@Reinier said:
But seriously: one page for all Cybertools? Makes no sense to me. Just one example.And for me, too, it looks rather strange (I somehow missed this moment and was now very unpleasantly surprised).

@Reinier said:
And merging two model lines with different designs and different sizes into one page? I don't get it.Yes, I agree. In my opinion, the accurate classification is just as important to an encyclopedia (which is SAKWiki) as standardizing design templates.
@Reinier said:
Your opinion matters! To me anyways :) You are a huge contributor (unlike myself). But even if you were not, your opinion would still matter of course.Thank you very much!
But you are exaggerating my contribution.@Reinier said:
I did not mean you in my previous post.All good friends?

Of course! All good friends.

-
-
@Nick4 said:
Thank you very much for your frank opinion, Reinier!
Strange, but I found it easily. ;) (And if it did not exist, it would have to be created.)TBH I didn't search at all :P

And, surprisingly:
*Last Modification: Friday 04 of January, 2019 19:10:55 MSK by Reinier. *
That's weird. I must have been drunk or something back then

OK we should definitely update that template :)
-
I plan to begin working on the incomplete "Tang Stamp" page https://www.sakwiki.com/tiki-index.php?page=Victorinox+Tang+Stamp+Guide
The Wiki deserves a good guide as a reference to this important SAK element, so I welcome input and comment from all contributors.
Before I start, does everyone agree that we should continue with the guide separated by SAK size, as it is now? This seems sensible, as it follows the indexing we use for the rest of the Wiki. Some of the missing sizes will need adding, and I may need image and info contributions.
The table format will need updating; the blank third column (Earliest Date) can be dropped as the timeframe will be listed in the notes column. I think it's OK to continue with the table format for each SAK size, as it's easy to build this out for each tang stamp style, and it locks the text to the images?
We will also need to agree on dates/date ranges to list, as these are often uncertain.
(edit: this is obviously a potential rabbit-hole of a topic, as there have been many different (and rare) stamps used since the beginning of Victorinox, so the update will be biased towards more recent SAKs where there is more reference material avalable).
-
Added the Spirit MXBS :cheers:
SAKWiki | Spirit
SAKWiki - The online Swiss Army Knife Encyclopedia. Information and Identification on Swiss Army Knives by Victorinox and Wenger.
SAKWiki (sakwiki.com)
-
Good job on the tang stamp page Max

-
thanks guys, but maybe 2% done...just playing with the formatting and testing the table design. There is sooo much info on tang stamps, it's a real minefield. For the moment, I will focus on the 91mm main blade stamps only. I will definitely need to tap into the experts that have reference material and images for contribution. We have to be cautious not to step too far into this topic, as it's closely related to the broader topic of dating SAKs, and then we open up a real can of worms wrt other identifiers that we don't have in the Wiki. At some stage, someone may want to take up this challenge (how to date a SAK), but this would be a Wiki all on its own! -
Parachute Knife added to 111mm series.
-
Added ‘US’ #5049 to the Master Craftsman page for the Space Shuttle used toward the introduction side in the early ‘80s. I personally have a copy that is c. ‘82/‘83.
-
@Max Stone said:
thanks guys, but maybe 2% done...just playing with the formatting and testing the table design. There is sooo much info on tang stamps, it's a real minefield. For the moment, I will focus on the 91mm main blade stamps only. I will definitely need to tap into the experts that have reference material and images for contribution. We have to be cautious not to step too far into this topic, as it's closely related to the broader topic of dating SAKs, and then we open up a real can of worms wrt other identifiers that we don't have in the Wiki. At some stage, someone may want to take up this challenge (how to date a SAK), but this would be a Wiki all on its own!Correct me if I'm wrong, but from what I know, Officier Suisse with crossbow on reverse started in 1975, and there was a blank reverse tang in 1974-1975.
-
Thanks NeleDo
- I'm going to reset the table and focus just on the 91mm tang history to start with. Once I have a draft chronology, I will probably put it out as a new thread on the forum to get comments, so we can get broad agreement. -
OK - first pass - won't add to Wiki until I get some comments here
Not sure if the blank reverse was only on Elinox in c. 73-75?Common Main Blade Tang Stamps of Victorinox 91mm Range
Tang Obverse / Reverse Image Date Range Notes
(images to follow) 1957 - 1974 VSSR / Victoria OS
(images to follow) 1974-1986 VSSR small "V"/ OS + crossbow emblem
(images to follow) 1986 - 2005 VSSR large "V"/ OS + crossbow emblem
(images to follow) 2005 - 2009 VSS large "V"/ OS
(images to follow) 2009 - 2011 VSS larger Swiss Made, large "V"/ OS
(images to follow) 2011 - VSS small "V"/ OS<u>Notes</u>:
- Tables shows main blade stamps of 91mm range from 1957 onwards
- Production examples can be found outside the date ranges
- Tang stamps for Economy line (Elinox) and Hoffritz SAKs are not listed
- Thinner 2.0mm main blade tang thickness introduced in 2004
<u>Nomenclature</u>:
VSSR (4-lines)
VICTORINOX
SWITZERLAND
STAINLESS
ROSTFREVSS (3-lines)
VICTORINOX
SWISS MADE
STAINLESSOS = OFFICIER SUISSE
-
@Max Stone said:
OK - first pass - won't add to Wiki until I get some comments here
Not sure if the blank reverse was only on Elinox in c. 73-75?Common Main Blade Tang Stamps of Victorinox 91mm Range
Tang Obverse / Reverse Image Date Range Notes
(images to follow) 1957 - 1974 VSSR / Victoria OS
(images to follow) 1974-1986 VSSR small "V"/ OS + crossbow emblem
(images to follow) 1986 - 2005 VSSR large "V"/ OS + crossbow emblem
(images to follow) 2005 - 2009 VSS large "V"/ OS
(images to follow) 2009 - 2011 VSS larger Swiss Made, large "V"/ OS
(images to follow) 2011 - VSS small "V"/ OS<u>Notes</u>:
- Tables shows main blade stamps of 91mm range from 1957 onwards
- Production examples can be found outside the date ranges
- Tang stamps for Economy line (Elinox) and Hoffritz SAKs are not listed
- Thinner 2.0mm main blade tang thickness introduced in 2004
<u>Nomenclature</u>:
VSSR (4-lines)
VICTORINOX
SWITZERLAND
STAINLESS
ROSTFREVSS (3-lines)
VICTORINOX
SWISS MADE
STAINLESSOS = OFFICIER SUISSE
No, blank back stamp was also found in the main line, so I would just add:
1974-1975 VSSR small "V"/ <no stamp>
1975-1986 VSSR small "V"/ OS + crossbow emblem -
I have taken pictures of 5 of the 91mm tang stamp types that I have, and added these to the Tang Stamp section on the Wiki in a new table format.

To avoid early onset of Wiki madness, I have limited the table to the 91mm series. It we feel this table format and presentation is working, we can look at expanding to other series. But I do suggest that we keep the reference page to the more common stamps found on the main blade of the SAKs listed on the Wiki. If we start to list every rare stamp, the page will get impossibly long :o. We can always daughter-off a page for rare stamps.
**As dates are often a subject of much debate, please comment on the date ranges that I have used -- but we'll need some agreement on dates if any need changing. **

I am also appealing for images of the tangs I am missing, the 74/75 with a blank reverse, and the VSS tang where the SWISS MADE is as wide as VICTORINOX. If someone wants to offer to take pictures of their references, please try to get a good contrast, and keep the text level in the pic, similar to the ones I added at the end of the table.

-
@NeleDo said:
No, blank back stamp was also found in the main line, so I would just add:
1974-1975 VSSR small "V"/ <no stamp>
1975-1986 VSSR small "V"/ OS + crossbow emblemThe blank rear stamp in main line is very well correlated to black double scissor spring use. But I do not think late ‘73 or early ‘76 should be excluded. Also pretty sure I have ID’d early OSCB rear stamps from ‘76.
1973-1976 VSSR small "V"/ <no stamp>
1976-1986 VSSR small "V"/ OS +And I think ESSR/blank was used later into the ‘77/‘78 range. And that Elinox stamps should be on a separate table to avoid confusion.
I think this effort should have a separate thread to discuss and not make updates without broad input and verification from what can be found in posts like in ulli’s thread and the vintage club thread. I think you’re okay with the more recent dates and they can be refined if or as needed.
But honestly, the ‘70s (and earlier) are a big cluster smurf that I am trying to explain with clear methods and examples. Without that, I think there will always be disagreement and confusion about dates therein.
And I’d suggest choosing a uniform color background (black or gray?) for the pics and to shoot them so the main reflection is ‘white’ and the text appears ‘black’ and not the other way around like they are.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login