New for 1992
-
Hi I am new to the posting and a few Gerber questions
In a couple of posts reference is made to early Gerber generations (1st-4th etc)
are there articles and information on the site giving details and history( differences etc)
Thanks -
@survivaledge said:
Hi I am new to the posting and a few Gerber questions
In a couple of posts reference is made to early Gerber generations (1st-4th etc)
are there articles and information on the site giving details and history( differences etc)
ThanksFirstly welcome to MTo.

Lots of useful info here, try out the Search button up the top left of the screen (near the HOME button), and if that doesn't get you what you want, just ask. There are quite a few Gerber enthusiasts on this forum (as well as other brands).
Try these as a primer to get you going on the early "Mr Pinchies" (Multi-Pliers):
/topic/2792
/post/928733
The MPT was another early multitool made by Gerber.
http://wiki.multitool.org/tiki-index.php?page=MPT -
Welcome to the forum survivaledge.

-
@Chako said:
I happen to have one with the scissors. It is an odd one though, as it seems to have been half thought out, with the nail nicks all messed up etc. It also has "First Production Run" stamped on the handles. It is the only one that I have with scissors though.Here is a group shot of all the Gerbers that I have with the old style locking mechanism. Note that a Carolina and Winchester tools are included as they both have the same locking style. Not sure if Gerber made them or just licensed it out, but I have a suspicion that Gerber made them and just stamped their customer's name on the tools. I can be wrong though.

Here, I played with the lighting to highlight the wording. Not that great of a photograph though.

I quickly moved to a black background due to the results from above to show the details on the back of the handles.
Here we have the First Edition Run.

And the later model (Second in the first group shot).

I think I have the second one can u help me out
Sent from my SM-G900W8 using Tapatalk
-
@Chako said:
I happen to have one with the scissors. It is an odd one though, as it seems to have been half thought out, with the nail nicks all messed up etc. It also has "First Production Run" stamped on the handles. It is the only one that I have with scissors though.Here is a group shot of all the Gerbers that I have with the old style locking mechanism. Note that a Carolina and Winchester tools are included as they both have the same locking style. Not sure if Gerber made them or just licensed it out, but I have a suspicion that Gerber made them and just stamped their customer's name on the tools. I can be wrong though.

Here, I played with the lighting to highlight the wording. Not that great of a photograph though.

I quickly moved to a black background due to the results from above to show the details on the back of the handles.
Here we have the First Edition Run.

And the later model (Second in the first group shot).


Sent from my SM-G900W8 using Tapatalk
-
@Joshua Smith said:
I happen to have one with the scissors. It is an odd one though, as it seems to have been half thought out, with the nail nicks all messed up etc. It also has "First Production Run" stamped on the handles. It is the only one that I have with scissors though.
Here is a group shot of all the Gerbers that I have with the old style locking mechanism. Note that a Carolina and Winchester tools are included as they both have the same locking style. Not sure if Gerber made them or just licensed it out, but I have a suspicion that Gerber made them and just stamped their customer's name on the tools. I can be wrong though.

Here, I played with the lighting to highlight the wording. Not that great of a photograph though.

I quickly moved to a black background due to the results from above to show the details on the back of the handles.
Here we have the First Edition Run.

And the later model (Second in the first group shot).


Sent from my SM-G900W8 using Tapatalk

Sent from my SM-G900W8 using Tapatalk
-
It may be temporary, but you can download his photo for now.
I make a backup just in case.Original posted by J-sews;
/post/325486

Experience the Multi-Plier Effect!
Gerber introduces the easy solution to every "toolbox" job with the new Gerber Multi-Plier! It's 13 tools in one, all
made of super tough stainless steel. The Gerber Multi-Plier features a (patent pending) slide-out plier head that
quickly locks into place with just the "flick of a wrist!" Available with either a rugged ballistic cloth belt sheath or
innovative leather belt sheath featuring a belt/backpack clip. Proudly made in the U.S.A.....only from Gerber!



Watch out Leatherman - your days of multitool domination are over! :D :D
-
Good thinking hiraboo, thanks

-
Hello, I just recently picked up this Multi-plier from a local thrift shop and out of curiosity was trying to figure out the history of it. So I did a little bit of research and I discovered that it was going to be a bit more difficult than first I assumed haha. After I discovered this forum I came up with my best-educated guess that it is a Version 2 but I could also be way off. Any insight on when this guy was made or the Version it's apart of would be greatly appreciated thanks in advance.




-
@7PsofLife said:
Hello, I just recently picked up this Multi-plier from a local thrift shop and out of curiosity was trying to figure out the history of it. So I did a little bit of research and I discovered that it was going to be a bit more difficult than first I assumed haha. After I discovered this forum I came up with my best-educated guess that it is a Version 2 but I could also be way off. Any insight on when this guy was made or the Version it's apart of would be greatly appreciated thanks in advance.Can you take another photo with all the internal tools opened out so you can see each tool ?
I'm wondering whether it has scissors or big awl, how thick the lanyard ring is, and whether the nail nicks line up with the handle cut-outs or not.
This particular MT is a bit of an oddity in that one handle has two cutouts, while the other handle has only one cut-out. I can't recall ever seeing that combination before, and I have nearly 40 of these very early Mr pinchies. I guess it might have been a repair job with a replacement handle, but it could also have come from the Gerber factory like that.
-
I hope I captured everything you wanted to check out. If not feel free to point out what I missed and ill post what you need.
Unfortunately, it seems that two of the tools were broken when I bought it but I can't complain for what I picked it up for haha.



-
@7PsofLife said:
I hope I captured everything you wanted to check out. If not feel free to point out what I missed and ill post what you need.
Unfortunately, it seems that two of the tools were broken when I bought it but I can't complain for what I picked it up for haha.Thanks, by my numbering system I'd classify that as a Version 2.0 (patent pending handle stamp), with a note that it seems to have one v1.2 handle (as the nail nick on the serrated knife blade matches the handle cut-out).
I think the broken tools are probably the can opener and the big triangular awl ( I suspect a previous owner was very heavy handed, if not downright abusive).
If you are using the pliers beware the "Pinch" (these truly deserve their reputation as "Mr Pinchy" )
The BO version of these old Mr Pinchies were never very common.
-
Thats more of an interesting back story than I was expecting. I don't know if I would of ever thought of the multiple versions that would have had me going back and forth haha. Thanks again for all your insight ill be sure to keep in mind your pinch warning as I put these back into a not so abusive service haha.
-
Someone posted this photo on the Facebook page and perhaps I'm being dim but I can't think I have seen the long tool on the left before.

-
@Gareth said:
Someone posted this photo on the Facebook page and perhaps I'm being dim but I can't think I have seen the long tool on the left before.I wonder if it a custom made component (possibly ground down from another larger component) ?
I have a prototype Mr Pinchy with a file ground down into a really long "awl". It also has pliers with no teeth in the jaws, a real weirdo.
-
That's a good though. I think you might be right too. Pretty good job they made of it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login