Help selecting Multitool
-
A Spirit XBS would be my pick, but they are so superior that it might be the last MT he will ever need. :D
-
Any thoughts about Leatherman OHT??
Sent from my SM-G960F using Tapatalk
-
Here's mine...

... And with the hacksaw blade fitted - which works surprising well.


-
I'll be the contrarian today. The Surge is way too heavy and has a bunch of fiddley little pieces that are not permanently attached to it that will get lost, those being your screw driver bits your sawblade and your file. The Super Tool 300 is a little bit lighter and has permanent tools. It does not have one hand opening blades but a Marine is going to have his field knife on him for most of his cutting needs anyway and the multitool is secondary. Another option is the Leatherman MUT which was designed for troops and has implements specifically for weapons maintenance. The MUT might be your best option.
-
@Alan K. said:
I'll be the contrarian today. The Surge is way too heavy and has a bunch of fiddley little pieces that are not permanently attached to it that will get lost, those being your screw driver bits your sawblade and your file. The Super Tool 300 is a little bit lighter and has permanent tools. It does not have one hand opening blades but a Marine is going to have his field knife on him for most of his cutting needs anyway and the multitool is secondary. Another option is the Leatherman MUT which was designed for troops and has implements specifically for weapons maintenance. The MUT might be your best option.I didn't want to raise the issue of fiddly bits and the liklihood of collecting grit and grease, cause it looks like he's already made a decision :P
Whilst the MUT does have the carbon scraper and pin punch, it fails most of your other criteria - being that it too is annoyingly heavy, it's main feature is a large knife - which could be a boon if he doesn't carry another, or a waste if as you say, he carries a dedicated blade. The pocket clip could be handy, but the handle retention clip system and the driver bit carrying system are both a PITA to actually use.
The MUT looks fantastic on paper, but falls short in practice.
My vote is always for the Wave, it's a best seller for a reason, (Mine predates the updated plier head - perhaps the hardened cutters would turn me off, but I've got scars from the Gerber cutters that shatter when you look at them)
If his lad has big hands, or doesn't mind the weight, the Surge is an excellent choice, and depending on what sort of work he does, the blade exchanger may very well pay dividends in due course.
Edit: Just looked up what a Motor T was - he's a truck driver. Weight is not an issue
The truck will mostly likely be fitted with a general servicing kit, so spanners and hammers won't be an issue.The scissors on the surge are well sized for dealing with pesky MREs

-
I have never owned a Surge or a Centerdrive, but I have messed around with both.
I prefer the smaller less heavy tools like the wave and charge. The Center drive is just under 10 ounces! That might as well be an extra large (heavy duty) like the surge. I like that the Centerdrive has the outside accessible bit driver, but the OTF design makes the inside tools a pain to use. If I carried the Centerdrive I would only be using it for the pliers and the bit driver, with the blade as a back up to an EDC knife. That effectively makes it a 10 ounce plier w/ screw driver. With the Surge you have a bit driver that is less user friendly, but you get a LOT more tools for about 2 more ounces of weight.
Do you think your son will use the wood/metal file, the wood saw, or the scissors? That is the main difference as far as I am concerned. If those tools would be useful to him then a Wave or Surge is probably the better option. If you think those are not useful to him AND you think he would use the bit driver all the time... maybe the Centerdrive would be better.

good luck with your choice
-
It still seems there is no "best" tool, and it is totally based on preference influenced by what tools and system are used most.
So the bottom line for me seems to be:
- Quality
- Weight
- Ease of use (outside opening)
- Tool interchangeability
Yes, he will be in a shop or vehicle primarily, so weight isn't too big a deal (plus he is a weightlifter). He has big hands - I expect those hands to be greasy, cold, or in gloves when he needs the tool. My expectation is for him to have something that will be available in a "situation" where he has a tool handy, even if it's not the best one. I don't imagine he would use it to replace standard tools. In other words, it's a field expedient tool.
This question has generated a lot of good feedback and I'm thankful for that. Tools were mentioned that I have never heard of. A lot of abbreviations and acronyms I have had to look up. Some mentioned would definitely be the last multitool because of the price point. I can understand now why many here carry multiple different tools brands and styles.
The great thing is that I can ask him for feedback and if he says something could be better I can always get him something different for his birthday!
Thanks, all and have a happy Thanksgiving!
-
Ask MTO which MT/multitool is best, get as many answers. We can be a bit overwhelming with our recommendations ;).
You've outlined
-
Quality. Leatherman has a 25 year warranty. Many in the US have enjoyed a wonderful warranty experience ( me included ). Outside the US some have had issues. Its a study tool and one I've enjoyed for years now. Used to its capacity it'll be a tool that serves him well. Pushed to its limits like some have and it has survived ( ask me how I know ). Pushed beyond limits, its a crap shoot. I always look at it like this, if my tool needs to be pushed to its outer limits to get the job done then so be it and I'll deal with the consequences. Great thing is we have a member who sells replacement parts and they are pretty easy to replace.
-
Weight. Its 12.5 oz. Add sheath and their bit kit/bit extender and a few saw blades and you'll creep up in weight. Weight is so highly subjective and personal. For many the tool is just fine to carry on a belt with accessories mentioned ( me ). Some find the tool best in a pack. Some see it as a good vehicle tool. I use a tool belt at work so carrying another 14 or 15 oz is not a big deal. What I find important is how good the belt carrying the weight is.
-
Ease of use (outside opening). The Surge has 4 tools that are OHO/one hand opening. Main plain blade. Scissors. BE/blade exchanger which holds a diamond file combo regular file or saw ( both included ), as well as T shank jig saw blades. To many this is a key feature in its utility. Then there is a serrated blade.
-
Tool interchangeability. As mentioned above the BE/blade exchanger is a wonderful feature. You are limited to the length of the blades that will fit when the tool is closed but I have used longer T shank blades when I wont be closing the tool. The fact that I can use a variety of different blades for different materials is for me a fabulous feature. Yes you have to carry the blades but 4 jig saw blades do not add a tremendous amount of weight.
There is also a bit holder within the tool. It takes LM/Leatherman flat bits. They are proprietary BUT you can buy the bit extend they offer or make one. The bit extender hold standard 1/4 inch bits. This IMO/in my opinion extends the tools capability even further. You can buy the flat bit kit which has double ended bits so in total you have 40 different type bits.
If you want to reach beyond that, I've modified a ratchet tool for the bit holder that I used for sockets. No you are not gonna get the torque but it did help turn longer screws faster.
I am primarily a Leatherman user. I do use Victorinox Multitools but ( this is in no way a knock on them ) I find the versatility of my Charge/Wave/Surge better for what I need a multitool for.
Regardless of what you decide I do hope we have been helpful to you.
-
-
Black oxide multitools are super cool!
-
I would also recommend a Leatherman Surge in this case

However, don't take our word for it...
What about a nice trip to a local shop and have a look at the Leatherman Surge and Leatherman Wave yourself?
Btw, the Leatherman flat bits do work and hold-up very good for me.
... anyhow, I often carry a Swisstool Spirit :D
*...runs away quickly -
Surge (BO) or OHT.
@Etherealicer said:
2) Buy the bit-kit and the extender, without it, the Surge is seriously crippled.I think that's quite an exaggeration. There's plenty it can do without it.
-
Here's another vote for the Leatherman Surge. I have one that I bought used. It is over 10 years old and works very well.
I do have an aversion to Multitools with little bits that can be dropped and lost. I won't say that this is never a problem, but I will say that a replacement kit can be bought for short money from Leatherman or Amazon and kept in the toolbox.
My Leatheman Surge lived on my belt, then in my backpack, and currently resides in the center console of my truck.
Yes it is heavy, but it is heavy duty as a result. If you did not need scissors, and did not need outside opening tools or blades, or if you dont want any bits that could be dropped or lost, then I would recommend the Leatherman Rebar or SuperTool. But if you need outside opening blades or tools, the Leatherman Surge will not disappoint!
-
My needs are primarily for a decent screwdriving option so it is no wonder that I have settled on the CenterDrive mostly and so far mine have not let me down.
Until you use one for driving it is hard to believe how much better it is for that than all of the other tools that I know of and had tried.
The rest of the load in the CD is also good for me though I am not sure I have used any of the blades even one time as I always carry a folder as well as a MT and dont even think of using the knife in a MT,never occurs to me.Which is better is just so subjective that it is impossible to really offer a great option and equally impossible to decide to try one unless the tool seems to be geared clearly for your particular use.
In my case the minute that I saw the CD it was obvious that I had to find and try one and only then was I able to move the Spirit X out of the Skinth and the CD in!Actually I didn't even really do that but instead I built a 2nd identical Skinth Loadout around the CD but also kept the priginal built around the Spirit intact so I can easily switch back and forth if I need to,so far I have not needed to unless I misplace the CD Skinth.
I guess one nod to the CD for his uses is that they seem to offer a kit ready for field use for the services and I bought mine on Ebay pretty cheap I think and it comes kitted out for general as well as Arms Maintenance uses and I cant think of any handier or heartier endorsement than that?
-
Here's what I carry with my New Surge. The T shank blades are cheap ones from Harbor Freight and Tool. They were a set I bought to see how they worked as compared to Bosch. They're ok and they get the job done. I've put them thru a lot of use and if you are in need of blades on the cheap then they'll do.
I carry those blades and one bit card with that Surge. I carry 2 bit cards with my Charge TTi and the bit extender. I don't do a lot of wire cutting and cannot really comment on those but they are replaceable so thats a good thing. My older modded Surge is my tool I use around the home.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login