Gareth's Sword Collection.
-
@Gareth said:
Oh they were definitely designed with combat in mind. Would have seen some use in the second Boer War and, more significantly, the Sudan campaign. The open veldt of the Boer War wasn't the ideal environment for a sword **but the Sudan was much more up close and personal. **Have you ever read Khartoum by Michael Asher? It's been ages since I have, but I do remember it being an excellent read and hard to put down.

PS. Do you like my bookmark?

-
Also Soilder Sahibs by Charles Allen. I know it's a different campaign, but a fantastic book and I remember there's quite a good bit about swords in battle during the Afghan wars... It also explains what a smelly was.

-
@Fuzzbucket said:
Have you ever read Khartoum by Michael Asher? It's been ages since I have, but I do remember it being an excellent read and hard to put down.
PS. Do you like my bookmark?

@Fuzzbucket said:
Also Soilder Sahibs by Charles Allen. I know it's a different campaign, but a fantastic book and I remember there's quite a good bit about swords in battle during the Afghan wars... It also explains what a smelly was.
Neither of those I have to admit but I'll put them on the embarrassingly long "too read" list.

-
On the subject of reading; a very good friend just gave me a copy of Swordsmen of the British Empire. Nice when your friends know you well. :D
-
Oooh smurf, that's right up my street!
-
@Gareth said:
Neither of those I have to admit but I'll put them on the embarrassingly long "too read" list.
After thinking about it, and in light of this very embarrassing revelation (on your part) that you've never read Soilder Sahibs, I think I may have a second copy up north somewhere, I think it's a hardback too. I can send it your way if you like? It won't quite make it for Christmas, but soon after... I can still put a bow on it.

-
@Fuzzbucket said:
After thinking about it, and in light of this very embarrassing revelation (on your part) that you've never read Soilder Sahibs, I think I may have a second copy up north somewhere, I think it's a hardback too. I can send it your way if you like? It won't quite make it for Christmas, but soon after... I can still put a bow on it.
That's extremely generous of you Fuzzy. I will happily take you up on the offer.

-
Have you read "shooting leave" by John Ure? Very happy to do a book exchange if you haven't. :)
-
@Gareth said:
Have you read "shooting leave" by John Ure? Very happy to do a book exchange if you haven't. :)No I haven't actually and it looks very interesting.
Right... have you read Round the World on a Wheel by John Foster Fraser? Three victorian gentlemen go round the world on bicycles and use fists and bad language to get out of any bother, including a dust-up with some Cossacks and an unfortunate diplomatic insident with a Chinese dog. It's a smurfing great read! 
-
Gareth, thank you very much for sharing your Sword collection here. Very interesting read and see

@Fuzzbucket said:
No I haven't actually and it looks very interesting.
Right... have you read Round the World on a Wheel by John Foster Fraser? Three victorian gentlemen go round the world on bicycles and use fists and bad language to get out of any bother, including a dust-up with some Cossacks and an unfortunate diplomatic insident with a Chinese dog. It's a smurfing great read! 
Now that sounds like the right book for McStitchy :D
Edit: Found a 1989 edition of it...

-
@McStitchy said:
Gareth, thank you very much for sharing your Sword collection here. Very interesting read and see
Now that sounds like the right book for McStitchy :D
Edit: Found a 1989 edition of it...
Oh well done!
It's maybe a bit slow to get started, but once they get going, bloody hell. I absolutely pished myself laughing at the incident involving the Chinese dog... others might not find it quite so funny. -
Looking forward to it

-
@Fuzzbucket said:
No I haven't actually and it looks very interesting.
Right... have you read Round the World on a Wheel by John Foster Fraser? Three victorian gentlemen go round the world on bicycles and use fists and bad language to get out of any bother, including a dust-up with some Cossacks and an unfortunate diplomatic insident with a Chinese dog. It's a smurfing great read! 
Geez... get a library, awlready!

-
So, here's my latest. I will be the first to admit I don't know a lot about Indian swords but I will tell you what I can (having checked the information with collectors who know what they are talking about). What we have here is generically know as a Tulwar but might be more accurately called a Firangi Siroha. Firangi for the fact this almost certainly has a imported European blade very likely made in the 18th Centaury. Siroha is a term that is new to me but I'm told it's what best applies to the shape of the blade from an Indian point of view. A nice overview can be read here; https://www.fordemilitaryantiques.com/articles/2019/7/12/a-guide-to-indian-sword-blade-types
This is a solid 910g (2lb) and has a 775mm (30 1/2") blade.
These swords, and the people how wielded them, had a fearsome reputation amongst the British Army in the 19th Century. Stories of hands, arms, legs and heads being removed at a single stroke seem to be common. The reasons behind this are various, and there are whole books about it, but it amounts to sharpening, hilt design and technique. While this is indeed a fearsome cutting sword the design of the hilt makes for a very awkward thrusting blade.



-
Cool sword !

-
Nice addition to your collection.
-
Cheers gents.

Unfortunately the blade on the tulwar had some active rust hiding under the patina and it can't be left unchecked. I'm not a massive fan of removing patina just for the sake if it but it's better than letting the blade corrode. I'm not aiming for a completely bright blade, just looking to arrest the pitting.

-
Unfortunately the blade on the tulwar had some active rust hiding under the patina and it can't be left unchecked. I'm not a massive fan of removing patina just for the sake if it but it's better than letting the blade corrode. I'm not aiming for a completely bright blade, just looking to arrest the pitting.
Gareth, very cool find!

I am always curious about Tulwar where the counter balance/pommel at the end being so wide and the handle is relatively short, does it ever hit your forearm/wrist if you move it the 'wrong' way? Though it may look different, I have always think it is quite multi functional and well thought out.
Also, how do you discover the rust under the patina? Does it 'rust thru'? I'm asking in case some of my older knives need maintenance without me knowing. Thank you in advance!
-
@comis said:
Gareth, very cool find!
I am always curious about Tulwar where the counter balance/pommel at the end being so wide and the handle is relatively short, does it ever hit your forearm/wrist if you move it the 'wrong' way? Though it may look different, I have always think it is quite multi functional and well thought out.
Also, how do you discover the rust under the patina? Does it 'rust thru'? I'm asking in case some of my older knives need maintenance without me knowing. Thank you in advance!
OK, this is a BIG question. :D The really short answer is; the hilt is so closely fitted to the hand there is only one way you can possibly hold it and you really can't do it wrong. The bigger question is; why?
I'll do my best to answer. It's all about cutting. So as you can hopefully see the close hilt has locked my wrist in the attack and formed an angle between my forearm and the blade. There is no physical way I can make it straighter (though obviously I can pull is back to make more of a right angle between blade and forearm for defending myself)
Compare this to the second photo of me holding a contemporary British Sabre. At full extension I can form a near straight line from elbow to sword tip.
With me so far? Good. Here's the bit where you might need to use your imagination or a prop (such as a stick) and try it for yourself. So when hitting your target you are looking to strike around 2/3 to 3/4 of the way up the blade with almost any type of sword. However the angled wrist then means the blade is drawn through the target as you swing, making a REALLY deep cut. With a straight wrist it's very easy to land a blow "dead" with no draw. More like chopping with an axe. In Europe we were taught that the draw cut was more effective but it's actually quite hard to do in the middle of a swing, even when you aren't under pressure. The tulwar hilt takes all the thinking out of it 'cos it's almost impossible to do anything else.
So why aren't more swords made this way? As with anything, it's a design compromise. For one; you are giving up a little bit of reach so you need to get in a few inches closer to your opponent (who likely isn't happy about the fact you are trying to hit him with a sword and might be inclined to try and do something about it). Secondly, and even more of and issue, is that it's VERY hard to thrust with the point. Nearly impossible in fact. Not without very nearly getting close enough to give the other guy a hug. ;)
Hope that helps.



-
@comis said:
Gareth, very cool find!
I am always curious about Tulwar where the counter balance/pommel at the end being so wide and the handle is relatively short, does it ever hit your forearm/wrist if you move it the 'wrong' way? Though it may look different, I have always think it is quite multi functional and well thought out.
Also, how do you discover the rust under the patina? Does it 'rust thru'? I'm asking in case some of my older knives need maintenance without me knowing. Thank you in advance!
That's easier to answer. :D Look out for any rough texture, that'll be rust forming and it's not going to go away on it's own. :) Even once you get rid of it you'll almost certainly have some pitting left behind but at least it's not going to get any worse.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login