EDC in DEC
-
<u>DAY 1</u>
So, no real use today (not anything, really
)
With that in mind, here's a shot of the PST with Chris - Moose (gedditt
, nevermind
)Cheers all and Happy EDC in DEC


-
Day 01
Ok, This is it for as long as I can stand it. I've pared down to the minimum and decided that my EDC is only what's in my pockets. I decided I wanted to try to carry something I haven't carried in years just to be different. I am, However, a creature of habit and I standardized years ago and was happy with a Swiss Champ, Spirit and the Myerchin rigging knife. Looking at my selection of knives and tools it took me 40 minutes to decide which I should carry this month. I've gone with the Vic Mountaineer and Leatherman Sidekick. No third knife because the Leatherman is one hand and outside opening. I still have a file, a saw, scissors, and the T&T. These are two tools that don't have a lot of redundancy and are considerably lighter than my usual carry. The items in my bag are vehicle and work carry which doesn't count in this challenge as I understand it. I don't know how long I can hold out without my usual tools because I'm already sweating and I've got the shakes. Other items are money clip, notepad, pen, watch, wallet, phone, pipe knife and lighter, and flashlight. I usually have some paper towels or a napkin or two with me as well but I didn't include that in the picture. Also not pictured is keys because that depends on which vehicle I need to drive. -
That'll work!

-
EDC 01:
No uses for the new EDC today. Last month I carried a Classic, the addition of a BAK and the slightly larger Signature Lite was noticeable!

-
Day 2
This morning’s 7am dog walk, (some items still in my pockets), keep the shorts loaded and change into them when I leave the house…utility shorts!
is that a business opportunity 
Sticks are more interesting apparently

-
This morning’s 7am dog walk, (some items still in my pockets), keep the shorts loaded and change into them when I leave the house…utility shorts!
is that a business opportunity 
Sticks are more interesting apparently

I do it somewhat similar. My wear around the house shorts/sweatpants always have a Compact clipped onto them. No matter what tool I carry throughout the day, in the evening it is always a Compact. Unless of course I am in a challenge :ahhh
-
-
Day 1 Update
Lots of use for my EDC today:
Scissors to cut leather string

Pin to clear the clogged leather stain bottle

Pliers to remove a thorn from a dog paw

Handyman and Vic wrench worked together to install the Christmas lights:Pliers to get a screw out of the catch-all-screws jar, so I didn't have to dump it

Pliers removed tag from the outside power plug housing, so i could route a cable through while keeping it close to protect from snow.

Did one side first, but then i realized i couldn't bend the cable enough to make it fit. So the second one had to be removed as well. That one did not budge of course, so the Knipex cutter had to help out

Awl to make a pilot hole

Bit wrench took care of the screw. For some reason the can opener had a hard time with that particular screw


Finished setup. I won't cut the zip tie, as I want to reuse it after Christmas

Also used the large blade of the Handyman to open a new bag of dog food. Enough uses for a whole week in one day

-
-
-
-
@SirVicaLot said:
Day 1 UpdateLots of use for my EDC today:
Scissors to cut leather string

Pin to clear the clogged leather stain bottle

Pliers to remove a thorn from a dog paw

Handyman and Vic wrench worked together to install the Christmas lights:Pliers to get a screw out of the catch-all-screws jar, so I didn't have to dump it

Pliers removed tag from the outside power plug housing, so i could route a cable through while keeping it close to protect from snow.

Did one side first, but then i realized i couldn't bend the cable enough to make it fit. So the second one had to be removed as well. That one did not budge of course, so the Knipex cutter had to help out

Awl to make a pilot hole

Bit wrench took care of the screw. For some reason the can opener had a hard time with that particular screw


Finished setup. I won't cut the zip tie, as I want to reuse it after Christmas

Also used the large blade of the Handyman to open a new bag of dog food. Enough uses for a whole week in one day

Great job Sir

It's situations like that we're waiting for impatiently to prove to the missus that all that stuff is useful after all :D -
@SirVicaLot said:
Day 1 UpdateLots of use for my EDC today:
Scissors to cut leather string
Pin to clear the clogged leather stain bottle
Pliers to remove a thorn from a dog paw
Handyman and Vic wrench worked together to install the Christmas lights:
Pliers to get a screw out of the catch-all-screws jar, so I didn't have to dump it
Pliers removed tag from the outside power plug housing, so i could route a cable through while keeping it close to protect from snow.
Did one side first, but then i realized i couldn't bend the cable enough to make it fit. So the second one had to be removed as well. That one did not budge of course, so the Knipex cutter had to help out
Awl to make a pilot hole
Bit wrench took care of the screw. For some reason the can opener had a hard time with that particular screw

Finished setup. I won't cut the zip tie, as I want to reuse it after Christmas

Also used the large blade of the Handyman to open a new bag of dog food. Enough uses for a whole week in one day

Good grief! That's more than I do in a week! :ahhh
-
@McStitchy said:
Funny how a millimetre in thickness can make a difference. How useable do you find is the light?In practice runs, in close-quarters scenarios, the light has been surprisingly effective.

Hopefully, we'll see how it does in an actual field operation during the challenge.....
-
Day 1
So far today the Yeoman helped open up breakfast and replace an air filter.I used the flashlight to find something under a cabinet.

-
-
@Hevy (CT-782) said:
Changed the MP-400 for the MP-600
(I was waiting a excuse to carry the MP600).
Enviado de meu moto g(6) usando o Tapatalk
Sounds like a good change.
@old Lefty said:
Day 1 - supplementary entry:
SwissCard helping to free my latest:

A Super Tinker to be nearby when I’m reading the spanking new Macgyver book finally out
Sent from my iPhone using Tapatalk
Macgyver book? I think I need to look into this
@Barry Rowland said:
Day 1: Cutting open a pumpkin snack bar for breakfast. I'm in the December Weight Loss Challenge too :DLooks like a good way to start the day
@Hevy (CT-782) said:
Today I used my Victorinox Ranger scissors to cut some tape to fix a name plate on my workstation.Used the GDC belt tool to scrap the old tape on the desk
Opened some biscuits and coffee packet for a small break.



Enviado de meu moto g(6) usando o Tapatalk
Nice snack and use
@McStitchy said:
Day 01Used my watch to track my lunch break time.
Surprisingly satisfying compared to using a phone. Just a press of a button... ;)Also used the Vic. Executive for my nails (no pics taken).
Nice watch
@SirVicaLot said:
Day 1Oatmeal time :D

I love oatmeal, although I don’t usually put fruit in mine, may have to try it.
@FanaticExplorer said:
Very sorry for the extremely late entry, I had almost forgotten about this challenge, was and still am caught up in final examinations but I will try my bestA quick rundown of my extremely minimal, ultra urban EDC
- Phone(Represented by the phone cover)
- Face mask
- Sanitizer
- Dental Floss
- Lip balm
- Old Style Traditional Wallet
- Earphones
- 32 GB onedrive
- Victorinox Explorer
- House keys
Don't want to raise too much attention while travelling around and majority of tools and instruments I need are part of my Dental kit anyway so I try to stick to a minimal EDC. I have ordered a small flashlight but it is yet to arrive so I must start the challenge without it
Sorry for the lack of interesting things and any kind of photography skills in the pictures I post.
A picture of my EDC with a human skull for comparison
And very conveniently I received a package of a garlic crusher to cut open with my trusty Explorer on the first day
Also totally forgot about my watch (Old Timex Mariner)
Looks like a nice selection.
@Alan K. said:
Day 01
Ok, This is it for as long as I can stand it. I've pared down to the minimum and decided that my EDC is only what's in my pockets. I decided I wanted to try to carry something I haven't carried in years just to be different. I am, However, a creature of habit and I standardized years ago and was happy with a Swiss Champ, Spirit and the Myerchin rigging knife. Looking at my selection of knives and tools it took me 40 minutes to decide which I should carry this month. I've gone with the Vic Mountaineer and Leatherman Sidekick. No third knife because the Leatherman is one hand and outside opening. I still have a file, a saw, scissors, and the T&T. These are two tools that don't have a lot of redundancy and are considerably lighter than my usual carry. The items in my bag are vehicle and work carry which doesn't count in this challenge as I understand it. I don't know how long I can hold out without my usual tools because I'm already sweating and I've got the shakes. Other items are money clip, notepad, pen, watch, wallet, phone, pipe knife and lighter, and flashlight. I usually have some paper towels or a napkin or two with me as well but I didn't include that in the picture. Also not pictured is keys because that depends on which vehicle I need to drive.You are definitely challenging yourself, swapping out both of your normal carry tools.
-
This morning’s 7am dog walk, (some items still in my pockets), keep the shorts loaded and change into them when I leave the house…utility shorts!
is that a business opportunity 
Sticks are more interesting apparently

Don’t you know sticks are one of the most interesting non-living things outside
@SirVicaLot said:
Day 1 UpdateLots of use for my EDC today:
Scissors to cut leather string

Pin to clear the clogged leather stain bottle

Pliers to remove a thorn from a dog paw

Handyman and Vic wrench worked together to install the Christmas lights:Pliers to get a screw out of the catch-all-screws jar, so I didn't have to dump it

Pliers removed tag from the outside power plug housing, so i could route a cable through while keeping it close to protect from snow.

Did one side first, but then i realized i couldn't bend the cable enough to make it fit. So the second one had to be removed as well. That one did not budge of course, so the Knipex cutter had to help out

Awl to make a pilot hole

Bit wrench took care of the screw. For some reason the can opener had a hard time with that particular screw


Finished setup. I won't cut the zip tie, as I want to reuse it after Christmas

Also used the large blade of the Handyman to open a new bag of dog food. Enough uses for a whole week in one day

Wow that is a busy and productive day
@Nix said:
In practice runs, in close-quarters scenarios, the light has been surprisingly effective.
Hopefully, we'll see how it does in an actual field operation during the challenge.....
I will also be interested in how the light performs for you. I usually find that day-to-day tasks don’t require a lot of brightness but in small lights like that the runtime may be short.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login