Dutch Army Knives
-
Yes you can, Guardian - 2 days off work! I’ll get my coat.....
-

Well done EMZ (with 'some' jealousy in my voice).
I only got the knife with a KCT emblem. So now I know what to look for further.Keep up the good work and have a nice weekend
-

What a beautiful patch. Never ever seen before! -

I was looking for more information on my Dutch army knives so I flipped through the pages on this forum.
So I came across information by Cyclone82, Gareth & Duder about the OH Parachutist from Victorinox.I have all three models:
Zwanenburg (2 variants). The difference is in the weight.
• Model 2006 - Zwanenburg; 1st version - Normal liners - weight: 158 grams
• Model 2006 - Zwanenburg; 2nd version - Wide liners - weight: 182 grams.
Victorinox:
• Model 2010 (DAK2010)
• OH ParachutistBoth the Zwanenburg and the DAK 2010 have the same NSN (NSN 5110-17-106-2332).
I have asked my old army buddies (DMO – Dienst Materieel Organisatie) for further information:
At some point it was decided that the 1st Interservice model of Victorinox Model 1992 (DAK1993) had to be replaced by a model with 3 layers (NSN 5110-17-106-2332). (This was also the case in Germany). Germany preferred the Victorinox 111 OH GAK (with a wood saw instead of a belt cutter and an oval opening), the Netherlands chose the Zwanenburg.
Germany continued with the 1st model 111 OH GAK (GAK3) despite the criticism of the oval opening. In 2007, the 2nd model 111 OH GAK (GAK4) was put into use, with a round opening that made it easier to open the knife with one hand.
The Netherlands did not need a wood saw, but preferred a belt cutter like at the Zwanenburg. Victorinox's OH-Parachutist came into the picture. There was a test model, with the famous green scales and Interservice logo, but without scale tools (no need for) to replace the "Zwanenburg".
For some reason (no longer traceable) the test of this model was not continued, so it has not been in use. Finally in 2010 it was decided to continue with Model 2010 (DAK 2010) which is still in use today.
My brothers-in-arms said that they had heard about the OH Parachutist, but that they never saw it. Has never been issued.
Their advice was therefore to be very careful with it. -
and all 3

-

How a Canadian C5 utility knife turned into DAK.After WW II, there was a shortage of everything in the Netherlands. By order of the Ministry of War (MvO), numerous pieces of equipment and weapons of the Allies (including Canadians) were reused by the Dutch army. One such piece of equipment was the Canadian Utility knife. Unlike the American version, the Canadian knives do not mention any country or part. The knife is called C5 in Canada.
In the period after World War II there was “something going on” (Bersiap period) in the Dutch East Indies that needed to be done. We, the Dutch called it “Politionele Acties” (Police Actions).
And so we went/had to go to Indonesia – these were called the ‘Indonesië-gangers”.Recently two of my veteran friends passed away. They were 95 and 97 years old. I got their pocket knives from their widows.
Both knives were issued to the "D Division" - "Palm Tree"
One knife (the top one) is made by Imperial (nothing on the scales or on the bail). The knife was used by 2-4 Battalion Guards Regiment Princess Irene. This battalion was made up of conscripts from the '46 class. Left for Semarang o/b Ms Tabitha on June 4, 1947 and repatriated on March 3, 1950 o/b MS Georgic.
We had to leave 43 men behind.The other knife (bottom) has no name or other abbreviations or the blade or on the bail, or on the scales. It is therefore not known who the maker is. The knife has been used by 4-4 Battalion Guards Regiment Grenadiers. This battalion was made up of conscripts from the '46 class. Left o/b/ "Kota Inten" to Surabya on May 28, 1947 and repatriated o/b “Kota Inten” on February 16, 1950.
We had to leave 32 men here.The background of the users is therefore known. I don't know anything about the knives themselves.
If anyone can say something about these knives, please let me know.Finally, a few images of the American cousins: the MIL-K (which I also have in my collection).
.jpg)
.jpg)
-
and the last picture:
-
Very interesting, Agamemnon! I have a Kingston USMC from 1945, which I believe is the same knife. They are beautifully made.
Myron

-
@Myron said:
Very interesting, Agamemnon! I have a Kingston USMC from 1945, which I believe is the same knife. They are beautifully made.Myron


Hi Myron,Thanks for your answer, but I think your knife is a bit older than mine. I think you have the 1st version of the MIL-K-818; the MIL-K-818-A. I base this on the position of the can opener and the bottle opener.
The first knives were developed for the USMC. These models had the screwdriver and knife on one side, the can opener and awl on the other side. This was an explicit requirement of the "Marine Corps"
This was also the case with the first test models of the "Army". The Army Infantry Board tested the blades again and felt that the parts should be "different".The 1945 Army model has the screwdriver / opener and awl on the left and the can opener and knife on the right. The first "Army" test knives, like the USMC knives, had a steel blade with a "Monel" handle. For the first test in 1944, it was advised that the blades should be stainless. The handles were replaced by stainless steel handles, as were the springs. In 1945 the "Army Infantry Board" approved the knives with the stainless steel parts.
The "Army" changed the position of the can opener to make it easier to open the square cans. The "Marines" didn't care because they already had a large stock anyway.
This "phenomenon" of relocating these tools can be seen in more countries, including the Netherlands.
We have the "brown" Amefa knives (with a fiber handle) from their early period (pre 1950) where in the 1st version the knife and the bottle opener are on one side and the can opener is the awl on the other. In the 2nd version, the can opener and bottle opener have also been swapped here. -
Thanks Agamemnon. Yes, I knew they switched around the orientation shortly after producing the knife. And then there was the long dry spell until the Camillus 1760 appeared. I have a few of those in my collection as well.
But there is something very special about the Kingston MIL-K-818. The brass liners on mine are beautiful.
Myron
-
@Myron said:
Thanks Agamemnon. Yes, I knew they switched around the orientation shortly after producing the knife. And then there was the long dry spell until the Camillus 1760 appeared. I have a few of those in my collection as well.But there is something very special about the Kingston MIL-K-818. The brass liners on mine are beautiful.
Myron

-
A US marked Camillus is still on my wish list. Well, some day... who knows.
I don't buy anymore from Ebay. Postage & Handling plus the fees for the Bay and Paypal are too high.
For lovers of the Holy Grail of DAK's I found this ad on Ebay.
https://www.ebay.com/itm/HOLY-GRAIL-Victorinox-Master-Craftsman-Blue-Smooth-Alox-Swiss-Army-Knife-KLU-KM/193462422864?hash=item2d0b424d50:g:7koAAOSwobFeuvfIIs it too expensive? Well, for me it is, but maybe someone will buy.
Please be sure, I am NOT the seller of this pocket knife!! And I have no interest in selling, nor buying it.
All I can say, I recently bought a knife from this seller and it was a positive experiences.
Just wanted you to know.
-
This knife is for sale for quite some time now, started at $ 999 iirc. Even though very rare I think it is way overpriced given the bad condition :(
-

Is it a Dutch Army knife (or is it British or Canadian or Belgian or French or maybe German)?
It is a knife of the Royal Navy, the so-called boatswain's knife. It is a three-part knife, stainless steel with a black ribbed Bexoid body. Folding knife, can opener and marlin spike. Metal bail. Length 17.3 cm.
It is a "derivative" of the Allied "Clasp knife" (naval variant) and was used by many countries after the war. Was made for the Netherlands in England during the Korean War and was called the “Churchill”. The NDVN (Dutch Detachment United Nations), part of the Regiment Van Heutsz of the Royal Netherlands Army and therefore also called the Van Heutsz Battalion, remained detached to the 38th Reg. 2nd Inf. Div. ‘Indianhead’ - 8th Army Corps in Korea for almost the entire time.
In addition to these "new" knives, the English "Broad Arrow" knives were also used with the approval of MvO (Ministry of War) in Dutch New Guinea (1961 - 1963).
From around 1965, the Royal Marine Corps had the knife of the Adler company in use. The knife was in use by the Marine Corps in the period 1993-2000.
So far the Dutch Army Knives.
The English ancestors:
This model knife was the standard British Army knife and was issued from the late 1930s to the early 1950s. In addition to the knife and the can opener, the knives had a marlin spike (Navy; they were very fond of the marlin spike and wanted to keep it). The black handles are made of Bexoid.
The Belgium cousins: ABL knives
These knives look exactly like the British models and were issued to the Belgian army after the second war. The knife, marked ABL CC 0530, is made in Great Britain (Sheffield) under license from the Belgian army (CC code). This knife has the same larger can opener as the English models. All these knives were made in the period of the Korea war (1950 - 1953); Belgium also had a detachment in Korea.
One model is only marked with ABL (comparable to the Dutch KL) without further additions. They all have a marlin spike and bear the letters ABL (a mixed language abbreviation of Armée Belge and Belgisch Leger), the manufacturer / supplier (Colasse, Libert & Colin Winand) and the year of issue (1950, 1951 or 1952). I also have one dated 1966, the youngest one I’ve seen so far.
The knives used by the Air Force have a stylized "pine tree" on the can opener. This pine tree can occur in various places and in various shapes.
The Belgian navy knives are marked with an anchor and the letter ZM-FN (ZeeMacht - Force Naval) and were made in Solingen (Friedrichswerk).
All the handles are made of Bexoid.
.jpg)
.jpg)
.jpg)

-
And the Belgiums:
.jpg)
.jpg)


-
I have a 1952 Colasse only because I'm Belgian.
The springs are super tough,
The handles feel crude,
The overall feel isn't pleasant.I'm a bit disappointed to see the Belgian Army never invested in some decent pocket knives.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

